Working on bath hot water pipe | Gaining Plumbing Experience | Page 2 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Working on bath hot water pipe in the Gaining Plumbing Experience area at Plumbers Forums

Hmm! Are you using an imperial ring when you connect the metric fitting on to the imperial pipe? I know metric nuts and rings fit on imperial pipe but you have problems with leaks like you seem to be having. Some compression fittings you may have to change the back nut as well.

This sounds like it could be it get and imperial olive,
good luck
 

Similar plumbing topics

  • Question
Great advice, and I really appreciate it...
Replies
6
Views
809
  • Question
What type of cylinder do you have?
Replies
6
Views
1K
  • Question
take iso valves off and fit 1/2 inch x 22mm...
Replies
5
Views
830
A
  • Question
It's likely 3/4" in pipe not 22mm. You likely...
Replies
1
Views
802
  • Question
To ensure a durable, leak-free connection for...
Replies
2
Views
530
Back
Top