zoning c heating x 3 +UHWC

[SafeGasInstall]

have been asked to price a full 5 bed +2bath+1shower+2 toilets all new install

My Q : have to have 3 zones for ch and 1 for hw ?
have done S + before but this needs one more for the tower rails only !


thanks for your help

stan

 

[Gray0689]

Just add another circuit in stan for towel rails
So if you want 3 separate circuits for heating and one for hot water 4 Channel time clock

 

[SafeGasInstall]

does honeywell do one with 4 channels ?

 

[tweakyboy]

Why don't you just use 2 programmable room stats for the the heating zones and a 2 channel programmer for DHW/towel rails?

You can get a honeywell 2 channel for two zones (DHW and towel rails) then get another 2 channel for the other two heating zones.

They do one just for 2 heating zones. Can't say I've seen a 4 channel programmer but then again its not something I've done before.

 

[Gray0689]

Yes mate you can get 4 channel time clocks

 

[tweakyboy]

Yes mate you can get 4 channel time clocks

I can find Horstmann and other manufacturers time clocks but can't see a Honeywell 4 channel anywhere?

 

[Kev the gas]

Easier to go for programmable room stats for heating zones.

How are you planning to provide temperature control for towel rail zone? An eagle eyed building inspector could question this. [we all know they wont, but if a problem arises on the job you could be found to be at fault if somebody kicks up a stink]

It might be easier to have electric elements on each towel rail that can work on an individual timer for each towel rail.



Kev.

 

[SafeGasInstall]

like your web kev is just like mine

safe-gas-installer.co.uk
safegasinstall.co.uk

 

[SafeGasInstall]

i have register it as a Ltd so you can not have it but you can have installer