Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Showers and Wetrooms Advice - Whether a tiled sealed shower using a tray former and tanking, to create a wet-room. Or even just plumbing in an electric shower or shower using jets or mixer taps. Ask a plumbing question in here..
Normal Threads
Can I fit a standard bath mixer tap with shower attachment to my system. I have mains pressure...
I've read that it is best to buy shower tray from the same manufacturer as the enclosure because...
- Millymollymandy
- 1
- 1K
- Latest:
- ShaunCorbs
One of the tap for my shower is leaking and I want to replace the cartridge(?) but I cannot seem...
Hi
I am trying to track down a Westminster 1902 bath/shower mixer valve diverter. I thought I...
- Paul Cockhill
- 4
- 5K
- Latest:
- Paul Cockhill
hi lads a customer has got a problem with the thermostatic shower valve however, I have tried...
I need a new attachment to screw onto the wall outlet as the old one has broken. The problem is...
Hi,
I'm a house builder and am putting together a spec for some new build semis. They're 1200...
- Jsnodgra
- 20
- 3K
- Latest:
- king of pipes
Had a plumber run some pipes for a bar shower, I’ve since plastered over them and tiled the...
- Moneypit
- 9
- 1K
- Latest:
- townfanjon
hi all
I have an issue with the hot water in my shower that you can hopefully help me with...
The open vent cylinder is stainless with the neck too small to fit a surrey flange and I'm just...
Have seen this for sale
AXOR hansgrohe Thermostatic Value Shower Control 3 Settings Silver...
hi everyone
I’m a novice in terms of diy but wonder if you can advise me at all.
I had a new...
- Beanikki
- 1
- 5K
- Latest:
- jtsplumbing
Anyone had one o these (mira mode thermo mixer) getting crossflow from cold into the hot? Tia
Hi -
Have joined the forum to ask the experts if they can identify this shower tray trap? I...
Customer has sent these pics regarding concealed shower. Apparently one of the knobs has broken...
I have a Customer who has 2 of these, installed 2006& 2009
Both are running for 10-20 seconds...
- Stoney Ground
- 0
- 943
- Latest:
- Stoney Ground
I am currently looking into putting a cold/hot water supply to the outside of a property to then...
- Mark0612
- 4
- 3K
- Latest:
- ShaunCorbs
I intend installing a digital shower. The mixing valves would be mounted in the loft. Water...
- Hienekinuk
- 0
- 800
- Latest:
- Hienekinuk
When installing aqua panels on a shower is it advisorable to leave a small gap 1-2mm between the...
Can anyone advise how to remove this plate and get to the cartridge? I need to replace it. Will...
Hi
I've been out to look at this job where this cylinder has been installed for over 15yrs...
its come up before many times , could one of you fine chaps advise me of the firm that sells...
- townfanjon
- 3
- 2K
- Latest:
- townfanjon
A friend of mine is moving to a larger gym premises, he needs 4 seperate showers to be run, at...
I have a low pressure system with 2 x 22mm pipes going from the loft tank and HWC to the full...
Hi All
This is my first post so apologies for any mistakes!
Please can someone help me identify...
Hi I have just had a complete refit of my Bathroom and the toilet was boxed in and the plumber...
- MickyBlueEyes
- 4
- 871
- Latest:
- MickyBlueEyes
I'm fitting a shower mixer that has no means of securing it to the tile surface other than...
- logan 1
- 5
- 1K
- Latest:
- ShaunCorbs
If no such thing likely exists, I shall pass on this info to the customer.
I've only fitted...
- WaterTight
- 12
- 125
- Latest:
- Harvest Fields
have fitted twin impellor pump next to cylinder in cupboard to come on when shower in bathroom...
This shower valve has become very stiff recently until it would only move about a quarter turn...
New Threads
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-