Bathroom Advice: UK Bathroom Companies

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Questions and plumbing advice in the Bathroom Advice - Ask questions and ask for advice on Bathrooms, Showers and Wetrooms in this forum category. Find advice here..

Normal Threads
Main combi 24 he. When i open the hot water tap the pin from the diverter only comes out...
Answers
3
Views
161
Hi, just had a look at a gloworm 38cxi 8 years old , the heating works although seems to take a...
Answers
3
Views
106
Hey guys I've had a two jobs where cust is complaining of hot water being too hot. One is an old...
Answers
15
Views
4K
...
Answers
15
Views
3K
Hello all, As of late I'm becoming increasingly aware of the amount of clean water I'm wasting...
Answers
13
Views
3K
Hello I am after a waterfall mixer tap for my ensuite. I have been around the plumbing merchants...
  • Retroelec
  • 19
  • 2K
  • Latest:
  • Old Account
Answers
19
Views
2K
Old Account
O
Hope some of the experts here can help me with this! I have a conventional system, heat-only...
Answers
17
Views
4K
I have a Vokera maxin 24e that wont fire for hot water is there anyway of telling if it a...
Answers
6
Views
113
The background to this is that I have a close friend who runs a charity helping to homeless...
Answers
18
Views
6K
Hello! I'm planning to replace my bathtub mixer, but obviously need to shut off the water...
Answers
4
Views
2K
Hello, We have had our unvented cylinder serviced for the first time a few days ago (the whole...
Answers
7
Views
16K
I have a new 32mm MDPE supply pipe being fitted at my property and my builder and I have been...
Answers
6
Views
1K
Hey folks, I had my heating system installed about 6 months ago. It is an unvented, pressurised...
Answers
13
Views
2K
Hi guys. Never been asked before so ive never looked into it. Are we able to remove a water...
Answers
14
Views
9K
I'm after a little advise with a Vaillant Ecotech Plus. We had a Code 75, Pressure sensor...
Answers
8
Views
2K
Our gas central heating comes on for an hour and a half in the morning at lunchtime it is set...
Answers
11
Views
1K
Hi, I need to install a point of distribution hot water heater for a client in a shop. It will...
Answers
3
Views
2K
Hi, I am about to buy a wall mounted water fall basin tap, and a builder warned me to be careful...
2 3
Answers
51
Views
11K
I am building a Shepherds Hut that will be 16ft by 8ft. I want to fit it out with a...
Answers
6
Views
11K
I have solar panels and in the summer we use the power generated to heat the immersion hot water...
Answers
18
Views
7K
Hi All, I have an unusual situation, and am not sure where to look for advice. Hopefully...
Answers
8
Views
1K
Hi, I'm looking for help with a persistent problem. I have a Vaillant TurboMax Plus 837E...
2
Answers
25
Views
7K
Had a new cylinder stat fitted. Flomasta thing Open vented system, newish boiler, no problems...
Answers
10
Views
2K
Hi! As part of a refurbishment I had a new basin and single Plaza waterfall tap from Victorian...
2
Answers
26
Views
12K
Afternoon all. I am thinking this is the diaphragm that has stretched a bit. Boiler is main...
Answers
9
Views
98
Hey, Not sure if I'm allowed on here - I'm just a homeowner. Not a plumber/professional. I've...
Answers
3
Views
809
Any of you guys tried one of these just put one on my own supply as a test really was recommend...
Answers
1
Views
1K
I have the above boiler with an unvented cylinder. There is no problems with the heating but it...
Answers
4
Views
4K
Hello all, I have an old galvanised metal cold water tank that needs replacing, I've purchased...
Answers
11
Views
2K
hi this has us a bit baffled our heating systems is cold water tank and little f e tank in the...
2
Answers
28
Views
13K
Post a New Thread / Question

New Threads

Back
Top