Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Gas Engineers Forum - This is a PUBLIC Gas Engineers Advice Forum..
Normal Threads
- Locked
Hi Guys.
Can someone give me a definative answer to this. Is it against regs to put a gas...
- Locked
hi i have an interview for british gas technical service engineer and they also want me to do...
- Locked
hi i am looking at picking up some NICEIC gas books the domestic on site safety guide part 1 and...
- Locked
Hi I am a plumber and heating engineer/drainage engineer, and now a day’s only do my own...
- Locked
What would you guys expect gas rating to be on the above,got a install next week and customer...
- Locked
Would the gas transporter come out if i was getting working pressure at meter of 18mb if i rung...
- Locked
Hi,
Our 16 year old Myson Economist 100,000Btu gas boiler just stopped a year ago and we had a...
- Locked
Folks,
I'm looking to buy a new gas torch and want a very reliable torch that can be used for...
- Locked
Folks,
How much would you expect to pay for disposable Propane gas cartridges to fit a...
- Locked
Hi, Guys If you were called to do a service on a gas fire in a front room would you have to also...
- Locked
Anyone know what/when the pay increments are for a BG apprentice? I know you start on 5k a yr...
- Locked
When doing a Gas Landlord Safety Cert, I came across a gas hob that doesn't spark when the...
- matt_t586
- 10
- 15K
- Latest:
- aggis
- Locked
hi can someone tell me what qualafactions i need to be able to weld 3" steel gas pipes
- Locked
The title says it all.
I'm moving an unvented cylinder from a house, to a anex that has been...
- Locked
Just found
Core Gas CCN1 Initial Training & Assessment for £836.35 including VAT and...
- Locked
doing my acs at the moment just a general question when you put a boiler on calibration mode for...
- piperdave
- 14
- 17K
- Latest:
- Toddyplumb
- Locked
Hi everyone! im level 2 plumbing, gas safe registered with boilers, cookers and soon to have...
- Locked
Hi,
Ive recntly passed my CCN1 & CEN1 and im looking to sign up to gas safe with my boss (who...
- shyguy2005
- 10
- 5K
- Latest:
- shyguy2005
- Locked
Hi All,
Am new to this forum so please go easy on me!
Am considering 'retraining' and am...
- Locked
i am a newly qualified engineer and have an inspection this fri the insp has called me and...
- Locked
Hi been to service a gas fire cleaned everything out but gas rate is fine bang on but burner...
- PlumbingSucks
- 5
- 9K
- Latest:
- GrahamM
- Locked
As the title says whats a the minimum distance that a gas pipe can be from any electric cable...
- Locked
I have held a CORGI card for as long as CORGI has been in existance. Supplied by them, a CORGI...
- Locked
been to look at a gas pipe job today and the boiler will be 9m away from the meter and there is...
- Locked
Do manufacturers quote Heat Input in gross or net?
For example Worcester just quote say 1.59...
- Locked
hey all,i have just completed my gas acs and i am finding it hard for someone to take me on as i...
- Locked
Hi All :D just a quick one , i have a citb certificate in domestic natural gas safety which ran...
- Locked
Hey guys
got my gas inspection in a week and i still have probs with gas rates.
burner...
- Locked
Hi there was looking for a bit of advice,
I have been invited for an interview with Gas...
- Locked
Hi,
Is the 400gms size of MAPP gas cannister the smallest size available or are there any...
New Threads
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-
-
Boss your bathroom - Join the Tile High ClubTrade Account Victorian Plumbing 10% off for...- Started by Dan
- Replies: 0