Oil and Solid Fuel Forum | Pro & DIY - | Page 2 | - Plumbing Advice Forum > PlumbersForums.net
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Questions and plumbing advice in the Oil and Solid Fuel Forum - .
Normal Threads
The Blue CPCS Competent Operator Card is an ID and competence card provided by the CPCS. It...
Replies
0
Views
656
Evening Gents. That time of year again the wife has demanded the CH Be turned on. However, im...
Replies
1
Views
755
Looking for help identifying a photocell for an old Myson Velaire oil boiler. The current...
Replies
1
Views
570
Hi Looking at some time connecting my solid fuel boiler up to HW cylinder, problem i have is...
2
Replies
25
Views
3K
installed a warmflow 70/90 bluebird boiler with a 0.55 x 80 degree nozzle. boiler is only...
Replies
1
Views
1K
I'm about to start the plumbing of my house and wanting to use a maxipod with a oil fired boiler...
Replies
1
Views
969
Just had oil boiler serviced and was told balanced flue failing on old Tranco Eurostar.Starting...
Replies
2
Views
990
My ageing tiger loop could do with replacing. All I can find online have horizontal connections...
Replies
4
Views
967
Looking for some advice. I just recently removed my old single pipe steam system and in the...
Replies
0
Views
765
Watchman Plus plug monitor showing “r” so replaced 4 x AAA in power tube and measured 6.3V at...
Replies
2
Views
1K
My current set up (images attached). I can heat my hot water tank (oldWood Fire.jpg) using the...
Replies
5
Views
1K
Hi guys, I'm relatively new to oil and have a question regarding S/ES and H/EH nozzle patterns...
Replies
0
Views
1K
B
Hello, Re-jigging a serviceable Boulter Camray 2 boiler to run presurised instead of gravity...
Replies
1
Views
782
Morning, I'm planning chimney maintenance work in July. Its a stone chimney, cement rendered...
Replies
4
Views
1K
G
Hi all. We have just had a new oil system installed including an external Tiger loop. I see that...
Replies
2
Views
1K
I have an ecoflam minor 60/80 oil fired central heating burner which is refusing to start. I...
Replies
1
Views
1K
Hi everyone. I have a Eurostar 90 that Ive maintaned for 10 years and I think a lot older. I...
Replies
7
Views
1K
B
Hi i wonder if anybody can help ? I drained down my warmflow boiler for a new rad , now its...
Replies
2
Views
2K
Replacing boiler and will be fitting Grundfos 25-80 Pump (recommended by pump sizing...
Replies
4
Views
1K
A
Oil fired boiler is heating my cellar but not my first floor, I have hot water baseboard heat...
  • Andrew DeRush
  • 0
  • 905
  • Latest:
  • Andrew DeRush
Replies
0
Views
905
Andrew DeRush
A
Hi guys, will be grateful for your advice. Riello rdb1 in Grant combi. When boiler has been...
Replies
2
Views
2K
I have here a Trianco TRO 15/19 boiler and on inspection it has no baffle plates, just the...
Replies
8
Views
2K
i have installed a firebird burner with the new ELCO burner the burner is factory set with a...
Replies
6
Views
5K
My grant 70 mk 2 heating pressure is constantly increasing in pressure. I have changed the heat...
Replies
15
Views
2K
God how I hate this thing! So the problem with this thing aside from it being filthy and...
Replies
11
Views
3K
We have a 9 yr old Heatslave 18/25 that's been regularly serviced. Heating was on in the morning...
Replies
9
Views
2K
Hi, I'm new to this forum so I hope I've posted this in the right place. I installed a Grundfos...
Replies
14
Views
8K
Hi all, new owner here looking for advice ... There is a Grant Euroflame 70/90 oil-fired boiler...
Replies
11
Views
2K
Hello all. I'm looking for advice to help my heating engineer fix my problem! He actually...
Replies
20
Views
5K
Hi. Having recently qualified in oil(yet to do any oil in the real world), I was wondering where...
Replies
3
Views
3K
Post a New Thread / Question

New Threads

Back
Top