Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Normal Threads
- Locked
Can anyone point me to a product that provides waterproof insulation for an external buried...
- Martyn2
- 23
- 9K
- Latest:
- ShaunCorbs
- Locked
Evening all,
I tried Baxi technical today but the guy I spoke to wasn't able to help me. I've...
-
- Locked
hi lads,
I thought I am going to share with you all my success especially after such a long...
- Locked
Nest men, could do with a bit of advice please .
I am on a boiler swap at the moment, guy...
- townfanjon
- 3
- 73
- Latest:
- ShaunCorbs
- Locked
Hi,
A customer wants cast iron style rads throughout, 9 or 10 in total but currently has 10mm...
- Locked
Hello,
Hopefully this will be an easy one, my kitchen tap's cold lever handle is coming loose /...
- Locked
Hi guys. Just about to start a plumbing and wanted to know if anyone heard of Access Training...
- Locked
Friend has a Vaillant Ecotec Pro 24 VUW 246/5-3 R4 boiler that was installed just over 2 years...
- plumbgaspaul
- 6
- 178
- Latest:
- king of pipes
- Locked
Might anyone know...
Their FAQ doesn't A this Q.
Thanks
- WaterTight
- 12
- 130
- Latest:
- jtsplumbing
- Locked
can anyone explain these filters to me, if you slide the bar across does that isolate that side...
- ambrosia
- 3
- 85
- Latest:
- ShaunCorbs
- Locked
Hi Everyone,
looking for new apprentice, we are based near maidstone in kent. please send CV to...
- plumb_know
- 8
- 3K
- Latest:
- turnpin
- Locked
Hi Everyone,
had a customer enquire about installing twin coil unvented cylinder with log...
- plumb_know
- 5
- 2K
- Latest:
- plumb_know
- Locked
If you have one of these, which one did you buy and was it worth it?
-
- Locked
Hi all, just finished my ACS re-assessments, to keep my qualifications up to date. Thats me good...
- Locked
Hi. Hoping I might pick your collective brains. Was on the verge of chucking out what I thought...
- Dave Gething
- 7
- 2K
- Latest:
- Dave Gething
- Locked
I asked this a couple of years back and had a decent response, but since then there’s new...
- Sharp Point
- 16
- 2K
- Latest:
- snowhead
- Locked
Hi, just spend ages cleaning the plate on this bag of Rubbish, serviced it and the emissions...
- Bibbs118
- 7
- 110
- Latest:
- Bibbs118
- Locked
Hi.
I need to remove this shower valve and I'm a little worried about causing damage to any...
- jrtrrror
- 7
- 3K
- Latest:
- jrtrrror
- Locked
Dropbox - IMG-20180417-WA0002.jpg
Dropbox - IMG_20180408_083141.jpg
- sammathias
- 24
- 4K
- Latest:
- rpm
- Locked
I've picked up a Worcester Fw100 programmer for a new boiler install but it didn't come with a...
- Locked
Just a quick one;
When filling out the benchmark when installing a boiler, when you use the...
- SWG Solutions
- 16
- 5K
- Latest:
- S.P.S.
- Locked
Anyone have any ideas why I am getting dark marks on my walls radiating upwards for about 350mm...
- Locked
hi guys, if a meter was installed externally by a gas transporter in the past in a box, is it...
- Sharp Point
- 3
- 115
- Latest:
- king of pipes
- Locked
Hello,
Here is the tap I have
basin mixer - bathroom taps and mixers - synergie - VADO
After...
- Locked
Hi Guys
Same old thing as my previous post's, I am still looking for somebody to shadow/help in...
- Hugbru
- 1
- 2K
- Latest:
- Lds
- Locked
Hi. I am in the process of changing a sink unit.
You'll have to bear with me because I don't...
- jrtrrror
- 11
- 10K
- Latest:
- ShaunCorbs
- Locked
Hi peeps,
Just a quick question, where’s the best place to get a blow torch connector that’s...
- al.dente112
- 7
- 4K
- Latest:
- Davinder
New Threads
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 1
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0