Plumbing Jobs | The Job-board | Pro & DIY - | Page 42 | - Plumbing Advice Forum > PlumbersForums.net

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Normal Threads
Hi there We moved our kitchen sink, dishwasher, and washing machine during a renovation and as...
Replies
2
Views
2K
Evening All Can anyone advise me what these fittings are? Hot water cylinder, 22 mm pipe, is...
Replies
10
Views
1K
Vaillant 838 to be fitted. Flue will end up on boundary line. Can a plume kit be fitted as...
Replies
16
Views
298
Hi Not sure if this is the right forum but i wanted advise on flow rates coming into a house. I...
Replies
10
Views
10K
Hi all, first time posting, looking for advice regarding a CWST. I was asked to look at a...
Replies
6
Views
2K
As long as the engine is the same size are all Expert, Dispatch and Scudo's of equivalent...
Replies
3
Views
102
ive got a couple of 15mm pipes that need to be cut but they are so close to the wall...
Replies
22
Views
5K
Hi guys needed some advice had to change a TRV on a radiator so drained down the system 12 rads...
Replies
3
Views
1K
Any ideas on the model of this Biasi boiler?
Replies
4
Views
100
Hi. I was looking for this part in B&Q, ScrewFix and Homebase, but with no success. They told...
Replies
11
Views
2K
Rob Foster told me about this forum, so here I am! I’m a capable all rounder with regards DIY...
2
Replies
26
Views
2K
Just at the moment I cant seem to do anything right on my break downs and I've had some right...
Replies
6
Views
187
  • Locked
Hi all, Hoping someone can help... We have a 937plus about 8 years old. Some weeks ago we...
Replies
1
Views
2K
I need to tap in to the central heating due to an extension with underfloor heating that’s gone...
Replies
19
Views
3K
Anyone fitted these? I am looking at installing an invented cylinder in my own house and while...
Replies
7
Views
2K
Hi all, What fittings are best to run this through my wall to sleeve and seal. Do I need to...
Replies
12
Views
6K
That is good a google clicks for website or SEO
Replies
0
Views
84
    • Friendly
  • Locked
Hi, I’m having trouble with my Riello burner. Upon starting the fan motor runs for 10...
Replies
5
Views
8K
Hi all, I am looking at buying a 1st floor flat which has 2 bedrooms ( In Ipswich). The second...
Replies
6
Views
1K
Thought it best to say hello after having a good look around this cool site. :)
Replies
6
Views
1K
  • Locked
Hi all, Hoping someone can help... We have a 937plus about 8 years old. Some weeks ago we...
Replies
8
Views
4K
Hi, my bathroom fitters installed this plastic pipe as a feed to the new radiator, i'm slight...
2
Replies
33
Views
5K
Just wondering what the process for having an old lead communication pipe-service pipe from...
Replies
3
Views
866
As per title, looking at making these out of 1/2" pipe for a local charity to raffle off but...
Replies
2
Views
1K
My house was built in 1902 and still has a gravity fed system with a cold storage tank in the...
Replies
5
Views
3K
B
    • Friendly
As per the title, I've only ever used what is supplied to me - top hat washers. The thing is...
Replies
15
Views
5K
I am moving a radiator 4m across a single story extension. I haven't got access to the roof and...
Replies
9
Views
2K
S
    • Optimistic
Vandals trash Stamford model railway exhibition — BBC News Why?
2
Replies
28
Views
3K
hi chaps. On a yearly service/safety check for hob what is it you’re looking for? Flame picture...
Replies
14
Views
326
Post a New Thread / Question

New Threads

Back
Top