Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
Questions and plumbing advice in the Plumbing Zone | All Other Country's - Find Plumbing Zone on Plumbers Talk. Professional plumbing advice forums. Plumbers Zoning and Zones..
Normal Threads
- Question
Hi folks
I don’t normally do much pipe lagging but I need to lag some rain water pipe work...
- macka09
- 7
- 960
- Latest:
- Last Plumber
I live in Azerbaijan, the house has three full bathrooms and has had up to 7 people living...
Have a job in the netherlands, is the 15 & 22 the same size as uk
- Question
I have a Very old commercial kitchen in my School, it dates originally from the 1950’s, it has...
- MrsFixit
- 1
- 691
- Latest:
- ShaunCorbs
- Question
Does anyone have a need for an estimator to price commercial mechanical & public health works on...
- Question
Hi everyone,
After a bit of advice in the fact I’ve recently passed my domestic gas...
- Chopper9495
- 12
- 1K
- Latest:
- Gasmk1
- Question
We run a community village hall and have a large kitchen provided for the use of hirers. This...
- FozzieBear
- 5
- 956
- Latest:
- FozzieBear
- Question
I run a small plumbing and heating company. I am looking for a commercial gas engineer to help...
- mfgs
- 2
- 1K
- Latest:
- GC Industrial Heating
- Question
Does the evomax lose its settings when power turned off
- Question
Replacing kitchen faucet for friend who needs to keep cost down. Something from low price range...
- curmudgeon
- 0
- 599
- Latest:
- curmudgeon
- Question
If a domestic boiler/gas appliance is in a commercial property, does this mean a gas engineer...
- Chopper9495
- 3
- 863
- Latest:
- ShaunCorbs
- Question
We are looking for Commercial Gas Engineers to join a Major company on various projects around...
- Gilleece
- 1
- 835
- Latest:
- jonesghd
- Question
Hi all,
Hope all are well.
I’m in the early stages of renovating an industrial unit. The fit...
- Me9141
- 5
- 1K
- Latest:
- oz-plumber
- Question
Hi,
I will try to explain best I can, please bare in mind I am currently in a learning stage so...
- CarlJa
- 6
- 1K
- Latest:
- ShaunCorbs
- Question
Hi
We are a commercial premises
Have been using the same plumber for years and very happy with...
- Louise12345
- 14
- 2K
- Latest:
- Timmy D
- Question
Hi all,
I'm on the committee on a community of owners for an apartment complex in Spain. It...
- Question
I would like to replace my gravity (non-pumped primary) copper hot water cylinder with a...
- Question
Have a under 1 year old Worcester Bosch Greenstar 30si combi boiler.
When you turn on the hot...
- Question
i was just wondering if anyone had any tips on removing stubborn emersion heaters from hot water...
- Question
hi all:waving: went too the above boiler today and the hot water would run for about a minute...
- Question
Found a problem with divertor valve on this vaillant, replaced divertor as it was stuck in...
- Question
Hi all;
I have a WaterSide water softner fitted along side my combi boiler which has been...
- Question
Hello everybody, I hope this is the right section to post.
Two years ago I bought a Rinnai...
- Question
Hi, I have a Water tank with two immersion heaters. The off peak switch heats the bottom...
- Question
I am putting in some new pipework at my daughters house, it is a new extension and a new combi...
- Question
I used my Kane 455 for a tightness test today very accurate
- Question
Hi Guys
First post and a long story so bear with me please.
Have been on several other forums...
- Question
Hi guys!
Silly question I'm sure but voices in head sowing seeds of doubt so apologies if a...
- pete23
- 23
- 8K
- Latest:
- chris watkins
- Question
I'd appreciate any advice on this situation.
We have a very old Chaffoteaux Britony II...
- Question
Hi all,
Im having a problem, yesterday I noticed the hot water only heated lukewarm, today I...
Plumbers Talk
New Threads
-
Bathroom Fitter in Newcastle Under Lyme RequiredBathroom Fitter in Newcastle Under Lyme...- Started by Dan
- Replies: 0
-
-
Biasi Riva Plus He 28C - No hot waterBoiler: Biasi Riva Plus He 28C Erp GC...
- Started by abc_plumb
- Replies: 0
-
Tape for pipe insulationDoes anyone have recommendations for tape to...- Started by siricosm
- Replies: 3
-
Higher than normal CO on new Grant InstallWondering if anyone can shed some light...
- Started by MethodPH
- Replies: 7
-
Radiator tails weepingHi all, I fitted my first rad the other day...
- Started by kristeva
- Replies: 3
-
What could be causing this noise in the tundish?Hi all, anyone know what could be causing...
- Started by Lawsofpower
- Replies: 5
-
Capped gas pipe begging ovenHi all. Hope you are well. So I fitted a new...
- Started by Steveuk
- Replies: 1
-
Replacing push fit Osma Gold for something else - tap changeHi, I know the fittings I have are Wavin Osma...
- Started by Gs2022
- Replies: 1
-
Ideal logic C35+ with Halo Lite RF ( not wi-fi)Trying to find an answer to my question...
- Started by trickytrev
- Replies: 0
-
UK Is that right to add inhibitor in boiler filter?I had an engineer today added inhibitor in the...
- Started by Jurgenjay
- Replies: 3
-
-
Is there a stand alone multiroom controller for wireless TRVs?Hi, can anyone recommend a controller for...
- Started by bureaucrazy
- Replies: 6
-
WANTED: Grasslin Famoso 601rf timer thermostatHello, the clock broke on my wireless...
- Started by bureaucrazy
- Replies: 3
-
-
-
What is causing water hammer in my flat?Hello I wonder can anyone shed any light on...
- Started by Mr Gwent
- Replies: 1
-
-
Issues With Nest Generation 3 Operating Boiler?I have a Google Nest Generation 3...
- Started by Dulbert
- Replies: 5
-
Apprenticeship PortfolioAbout to complete my plumbing and heating...
- Started by Ghostrider
- Replies: 5
