Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
Hi,
Unfortunately I find myself in a bit of a predicament.. The house I live in is very old...
I’ve recently moved into a bungalow with an open vented central heating system installed in 1987...
Hi I'm hoping someone can help with a problem I've had since November 20. I got a new circuit...
Onto my 2nd loo that’s currently turned off as it’s constantly flowing into the pan. Grohe...
Hi anyone changed the cartridges on an abobe atlas kitchen tap? I don't think there is a box...
- Matt0029
- 2
- 1K
- Latest:
- Matt0029
Hi everyone. Being driven mad by a leaking toilet. 2 in fact!! It’s not the fill valve over...
I am closing up a property for 2-3 months and will be turning mains water off. Hot water is...
- Hillabaloo
- 1
- 1K
- Latest:
- ShaunCorbs
Im renovating my bath room and where i removed the bidet, i now have an extra set of unused hot...
Hi All
I am looking to fit a 600mm dishwasher, i will be fitting it under counter in a current...
I have a high level cistern and was replacing the toilet pan (waste ceramic completely cracked...
Does a y plan need a bypass between the pump and the 3 port valve. If there is no pump over run?
- Matt0029
- 24
- 8K
- Latest:
- SJB060685
Hi, Would anyone please be able to identify this older type of push-fit connector? The pipe is...
- Ian_Kellaway
- 1
- 2K
- Latest:
- Ben-gee
Hi All,
I'm 53 now and my knees are well and truly playing up. I've used knee pads all my...
- The Plumber Guy
- 5
- 2K
- Latest:
- gmartine
Hi all,
I’m having a problem with my washing machine and any help would greatly be appreciated...
- Sully26
- 6
- 3K
- Latest:
- Ric2013
Morning all, I need to reduce a Floplast 43mm solvent pipe down to a 40mm size to connect to a...
Does anybody know how to remove this Plastic part from the copper pipe without destroying it...
- Serval
- 3
- 2K
- Latest:
- Serval
I need to run central heating pipe horizontally under the floorboards of an upper floor. I need...
Desperate help please - how can I get these 3 grey water pipes fed and sealed into drain please...
I have an issue with my concealed Ideal Standard Conceala cistern
Just don't seem to be able to...
I have a 225cm wide, 45cm high radiator on a standard vented, 8mm microbore two-pipe, fully...
Excuse me for my lack of knowledge in this but i'm a first time buyer so this is all very new to...
- davidfredlee
- 2
- 2K
- Latest:
- davidfredlee
Hi all,
Recently purchased a property and there is quite a few jobs that need doing. Worked as...
- WorkAvailable2021
- 0
- 1K
- Latest:
- WorkAvailable2021
My son has just moved into a ground floor flat in a five-storey mansion block in London, built...
What can possibly cause a 3 port valve to bang. Got called to a job that has banging...
Hi. I'm currently renovating a house I've just bought and have just had a Vailant EcoTEC Plus...
- GH1984
- 20
- 3K
- Latest:
- king of pipes
Hi All
Pretty explanatory really, need to cut some old 3/4" pipe feeding H+C bath taps, access...
Hi
In open vent heating (f and e) should the feed be tied into the return or flow?also is there...
New Threads
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 10
-