Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
Hoping one of you can help
may the most recent job I’ve done I’ve had to fit porcelain pan...
- Cook9410
- 6
- 3K
- Latest:
- Ben-gee
We have had a long term problem with damp in our bungalow which exacerbated when we changed from...
Have a section of copper pipe I need to replace in my attic (very slow leak).
Should I cut pipe...
- DCortez
- 2
- 1K
- Latest:
- DCortez
We have loud vibrations in our pipes. It happens when either of our showers is used about 10-20...
Hi all, I am hoping someone can advise on this.....bought a 1.5 bowl sink a while ago from B&Q...
Morning, I have a Baxi 830 installed not too long ago. I was going to run the inbuilt...
- Decka84
- 5
- 3K
- Latest:
- cjg
Hi, I am about to add my underfloor heating to hive. I was informed I would need a multizone...
Hi, This is my first forum posting ever so forgive me if I'm not clear. A few years back I put...
- Goldeneye
- 7
- 2K
- Latest:
- Goldeneye
Hello,
*Disclaimer: Please forgive the messy photos. Our small storage/laundry room is a...
- cravenpipes
- 8
- 4K
- Latest:
- cravenpipes
Hi folks,
Newbie here.
I'm having trouble connecting the washing machine hot and cold water...
Hi all
Some old taps have what I'm describing as metal lugs (but just because I can't think of...
- Plumb Line
- 5
- 2K
- Latest:
- Plumb Line
Hi - can anyone identify this fitting and its purpose - it is located on the downstream side of...
Hi all, I have a 2 port motorised valve that screeches when CH shuts off, this has been ok for 6...
Hi there,
We have a pop-up waste in our bath, one where you twist to open and close the plug...
- pete1412009
- 5
- 2K
- Latest:
- AWheating
General question to canvas some professional views please: Is it normal for a properly...
- LE4R
- 1
- 2K
- Latest:
- ShaunCorbs
Hi,
Any help or opinions appreciated on this topic.
Summary - last year bought a 90’s build...
Hi all with the advent of photo voltaics and heat stores, low temp UFH becomes a why bother...
Hi ladies and gents,
Just thought I'd give you a laugh.
As some of you are aware, I'm...
- Ric2013
- 15
- 4K
- Latest:
- Ric2013
We have water trickling out of a wall, it seems a pipe inside is damaged, so it may require...
I rent an apartment in Santiago, Chile where the water is very hard. For the last few years...
- buzzdriving
- 4
- 2K
- Latest:
- buzzdriving
I need to lower down the water pressure and have identify the stopcock at main water meter. I am...
Howdy,
We have an issue with water hammer since going to a pressurised system from a gravity...
Hi just need a plumber to complete my NVQ portfolio based in east london or London willing to...
- Jimale2894
- 0
- 660
- Latest:
- Jimale2894
Has anyone ever worked for a university as a plumber? Mainly maintenance I imagine and also...
- Matt0029
- 13
- 2K
- Latest:
- Matt0029
We have 2 separately metered water supplies entering our property and these feed 2 sets of...
I have a really bad situation. I've had a leak for about a month now that has caused a lot of...
- Sarahlouise19
- 11
- 2K
- Latest:
- Ric2013
Hi all,
I've had this question on my mind for quite sometime but I do not know how to answer it...
I had to call out an emergency plumber last week. My outside tap was leaking through its check...
- BrianCox
- 4
- 4K
- Latest:
- Knappers
Have a combination valve with 6.5bar incoming pressure. The valve would have been set at 3 bar...
- brierleystuartj
- 5
- 3K
- Latest:
- brierleystuartj
Amazing Chemical Clearance Sale
We are selling off the following Pallets of chemicals reduced...
- CorgiDirect
- 0
- 932
- Latest:
- CorgiDirect
New Threads
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 10
-