Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
Hi all
I’m curious about the conversion of my heating system
I have a gravity system with no...
- Andymav
- 0
- 1K
- Latest:
- Andymav
Good morning all
Vaillant ecoTec Plus 831 Filling Loop
Can anyone recommend a pair of suitable...
Hoping for some advice on the use of AAVs while plumbing in my new bathroom. There is a sketch...
Hello everyone looking for abit of advice I've got a total of 6 radiators in my house 5 are all...
- lambokid123
- 2
- 2K
- Latest:
- lambokid123
Had system drained and replaced 3 rads. Just wanted to know is any inhibitor ok or does vaillant...
Hello..
Need to cap off two copper pipes...the problem is getting access to a straight piece of...
Greetings!
Having just rebuilt a Rayburn 460k with (ecoflam burners) due to the dreaded warped...
Quick question about sink pipes...
The hot and cold come from pipes behind the neck of the...
The SDM1901 is now almost obsolete. The SDMV2304 looks like a drop in replacement. I have a...
- PhilDesanex
- 0
- 1K
- Latest:
- PhilDesanex
Dear Sirs,
I was wondering if someone could possibly inform me of the correct setting...
Can anyone please explain how you detach the grey flush mechanism from the flush buttons...
- Constance Brown
- 2
- 1K
- Latest:
- Constance Brown
After a CH install I've lifted the floor boards to find the central pipes unsecured and not...
Hi all in the forum,
I seem to be perpetually tweeking my sytem to get it how I would like it...
- jc_150
- 5
- 982
- Latest:
- jc_150
Hello everyone, I'm not a plumber, but I'm having an issue which keeps re-occurring and the...
- tobiasuk
- 15
- 3K
- Latest:
- oz-plumber
I'm having problems with 1/2" x 15mm lockshield/manual radiator valves that I've bought from one...
- Bob Kellock
- 4
- 2K
- Latest:
- king of pipes
Hi There
Currently using a Panasonic Air to Water UFH heating system in a new build and appear...
- Deleted member 113144
- 5
- 3K
- Latest:
- simonhill
You I have a jet pump and bladder tank.
the water pressure is fine when I open a tap. then psi...
This maybe isn't so much about asking for advice as giving it 🤔
I had a leaking HW cylinder (23...
- Radian
- 6
- 2K
- Latest:
- Radian
Sorry if I seem like a novelist as I am but just seeking a little advice as I went to turn on my...
- Moonsheat
- 6
- 1K
- Latest:
- Chuck
Hi there,
I was hoping to get some advice on my DIY drain surveillance after suspecting our...
Hi guys,
I am looking for options on how to solve the issue of water pressure dropping when more...
Hi,
I'm installing a water filter which has plastic inlet and outlet fittings like this...
Hi all, hoping there are answers out there to my small dilemma. A customer of mine wants 15mm...
- Plumb Tidy
- 1
- 2K
- Latest:
- ShaunCorbs
I’ve a 400 square metre 5-story house, with an unvented heating system and the hot water on a...
Hi All. Do I need to apply plasterboard tape prior to tiling in my bathroom and shower...
- daveok77
- 6
- 2K
- Latest:
- daveok77
Hi all,
I am completely new to HIUs and I need some advice with regards to the best course of...
- Max___
- 7
- 4K
- Latest:
- king of pipes
Hi, I’m not a plumber by trade but needed PVC pipes chased into wall which I’ve done but the...
I've had a Franke 1.5 sink fitted recently using their siphon 2 plumbing kit as part of a new...
hello all i have a problem
i have a valve that is 1" wide and a hose that need t connect that...
- Achille Becker
- 1
- 969
- Latest:
- ShaunCorbs
New Threads
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 0
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0