What we all working on this week ? | UK Plumbers Forums | Page 60 | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss What we all working on this week ? in the UK Plumbers Forums area at Plumbers Forums

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,156
I have a insurance job to try and rescue a poorly installed quad shower the customer wants to save the tiling if possible and has a few spare so fingers crossed it may work , the loss adjuster allowed em £1500 that will just about cover materials. Kop
 

Attachments

  • Screenshot_20191031-033038.png
    Screenshot_20191031-033038.png
    400.3 KB · Views: 209
  • Screenshot_20191031-033046.png
    Screenshot_20191031-033046.png
    420 KB · Views: 106
  • Like
Reactions: Dan
What do you chaps make of the latest warmzilla ads on the forum how the hell can they do a boiler install for under £1500 not doing us any good is it ?? I can't match their prices and I certainly wouldn't fit for them, a boiler swap and controls upgrade is a ,11/2 - 2 day job cleaning and flushing is 1/2 a day, then there's the removal of all the old boiler , the new boiler to install ,all the making good , electrical work to do,then theres the commissioning and all the paperwork to complete anyone who does it in one is cutting corners, your thoughts chaps ?? . Kop
 
Where I went wrong I drew around the trims on the wall as it’s an old property except it goes in the trim either side 15mm feck
 
My above comment was me messing mate. We all have off days, or in my case weeks 😂😂

But your right dumbo here forgot to add the 30 mm 😂
 
I've given over with the trims, weak points tbh IMO 🤷‍♂️

I don’t use internal corner trims, butt and scribe and then a minimal silicone bead is better I think.

However need trims on edges, although have you tried Aquamura, they do a 1200 board with one long edge finished the same as the surface - really neat job possible without a single trim used!
 
I don’t use internal corner trims, butt and scribe and then a minimal silicone bead is better I think.

However need trims on edges, although have you tried Aquamura, they do a 1200 board with one long edge finished the same as the surface - really neat job possible without a single trim used!
Yeah I use the end trims, just not the corners. Not convinced how water tight they are, the board only lips in 5mm or so. No haven't heard of them, tbh I always use MultiPanel as haven't had any issues with them. I'll have a look 👍🏻
 
That is a cracking cut mate. Did you do it yourself?

There’s a join at the top as the ceiling is 2.8m ish

Yes it’s taking too much time luckily I’m on day rate
 

Similar plumbing topics

  • Question
Very hard to follow your post Tina. What...
Replies
18
Views
4K
  • Question
Yes, The size of the external expansion...
Replies
17
Views
10K
No, I believe you absolutely. My own problem...
Replies
9
Views
247
  • Question
The customer had a Mira Sport they had bought...
Replies
14
Views
224
    • Like
  • Locked
Have another guy working for me but on this...
2
Replies
25
Views
5K
Back
Top