Hi,
I've done a bit on these boilers before but this one is being a right pain.
AAV has been changed due to it firing water everywhere, PCB also change it got a little wet! Diaphragm changed due to no hot water diaphragm was knackered to say the least. so Boiler fires up on heating works...
I am working on a alpha cd28c combi, i recently changed the diverter valve as the tennant had very little hot water and when the hot water tap was running the boiler would stay on telling me its not a blockage in plate heat exchanger and not overheating. it was send the hot water down the...
Went on their training course last year and all seems good but still not fitted any.
What is your opinion on them guys?
Also do you think the commissioning of them is a bit long winded?
I am currently fitting Logic plus and Vaillant boilers but Alpha prices are looking quite good for the low end...
Just had some combi boiler quotes in, quoting for Glow-Worm and Alpha boilers. I've never heard of either and wondered if anyone had any experience good or bad.
Hiya guys I had a issue with diverter valve on my combi so I replaced the diaphragm in it. Trouble is my boiler is not firing up now when I call hot water or heating. I am thinking it could be flow switch, if so any way I can test it
Hi there I was hoping to get some advice about my boiler,
Occasionally when the CH tries to come on or I run the hot water the boiler will start the fan and then the red 'A' light will be flashing and the yellow B light will stay out. The fan will run for about a minute then it remains off...
Hi
Our 10 year old Alpha CB 24x boiler, which has worked fine so far !! started tripping off in October.
Following instructions, we reset, then called our original installers to service the boiler - explaining the issue...
After 4 visits by 3 engineers (long story...), whilst we had a service...
hi hope someone can help me.
my bolier alpha he cb25 has stopped working.
no hot water no heating.
there are no lights at all.
its as if its no power just dead.
followed trouble shooting in manual leads to replace pcb????
checked all fuses all fine
any help would be great to close to christmas
hi hope someone can help me.
my bolier alpha he cb25 has stopped working.
no hot water no heating.
there are no lights at all.
its as if its no power just dead.
followed trouble shooting in manual leads to replace pcb????
any help would be great to close to christmas
Hello all.
i was called out to an Alpha CD35C. Boiler was completely dead when I arrived. The job sheet said 'boiler not resetting'
The 2 Amp fast blow fuse had gone, I replaced the fuse. The boiler ran however the PCB was actually smoking! I made some other checks and observations then...
Got three leaks on this boiler all around the flow valve and pipe coming out the boiler looks a right headache as well . Not sure its worth the hassle of repairing anyone with experience of alphas opinions would be welcome.
Hi can someone give me some advice please,
I've got 5-6 year old alpha cb28x. I've sent the pcb away recently as the fan was failing to start and came back repaired and worked fine.
but now keep getting a solid red led, failed to light, I've got 230v from the gas valve terminals but the valve is...
Hi
We have an alpha intec 28x boiler with remote thermostat.
The thermostat is showing the heating is on but the display on the boiler says it not. Its very intermittent though, The boiler will click like the heating is about to come on but nothing happens, sometimes it will stay on for a...
Hi
I have an alpha intec 28x boiler with remote thermostat.
The thermostat is now showjng an error 90c4 08 and will not link wirelessly to the.boiler so i am manually having to turn the heating on. Need help asap
Just after a bit of technical advice on the alpha cb25.
one of my customers contacted with a boiler fault, the same fault is happening on both heating and hot water. when there is a demand on the heating side the boiler kicks in, fan and pump both seem to run fine, boiler then fires up for 1 or...
Hi guys I got asked to go and have a look at a job yesterday for the above boiler.
At first they had no HW so someone went and put in a new plate heat exchanger.
Still didn't work, someone went and changed diverter valve (i think).
Still didn't work, they ordered a PCB and lucky me got told...
Hi, I have just ordered the 34C to use with the flowsmart system but now see that the new Intec2 35CE model has been released and claims marginal improvements in efficiency and heat up time. I have not yet received the boiler and will have my 14 day cooling off period when I do. Do you think it...
Hi chaps, would appreciate anyone could help me solve this, because this boiler is doing my head in.
Alpha (piece of £$%&) CB25 combi.
I've replaced the plate heat exchanger 3 weeks ago. Since then the hot water pressure has gradually reduced to a mere trickle. So you would think a block in the...
Hi, over the past few weeks I have been having issues with a 1 second flashing b light and that turns to a red a light coming on,
i need to turn power off and on constantly just to get hot water for a shower,
looking online it says it's the temperature sensor but people have said there could be...