burner | Page 8

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

burner

Recent contents Top users
  1. B

    Worcester 240 rsf - pilot ignite but not main burner

    Hi guys, got or a worcester 240 RSF not giving hw or heating on demand. When demand is put to boiler, pilot light ignites, spark electrode continues to spark even though the pilot is lit but the man burner will not ignite. Put gauge on gas valve and Gas valve not opening. Gas valve has has...
  2. S

    Burner lock out on heating only?

    I know that this makes no sense, but I have a boiler burner that only locks out when the heating is on. I know that the burner only receives power to make it fire and has now idea whether it's from hot water or heating but that is what's happening. Any ideas?
  3. brum

    Riello Burner

    Hi guys have a riello burner with oil leak, traced leak to pump adjustment screw not the nut but actual screw. Is there a repair kit for this?Boiler is coming out in a couple of months in exchange for woodburner.Its only a small leak but smells quite strong would like to help customer .Thanks.
  4. E

    What is the burner / operating pressure?

    On an new boiler, the burner pressure / operating pressure is 0 mbar, because of the zero governor, is that right? On an old boiler the burner pressure / operating pressure is what, around 14 mbar, is that right? What is the burner pressure / operating pressure on a cooker and why (can it be...
  5. W

    Vaillant VCW GB 282 EH burner problem

    Hi all, just after some advice, I've recently moved house and my new boiler is temperamental, during use the burners ignite and it burns for 30 secs or so then all goes out then relights and burns again, this continues throughout use? Obviously this makes the water temp vary and is a pain when...
  6. C

    Trianco Eurostar Burner Max 4 problems

    Hi Guys, this burner has been working great for some years, it is serviced annually. Last week the burner cut-out after running for 2 minutes. The reset light came on in the Satronic box. I reset it and it cut out again after 2 minutes. All the filters have been cleaned or replaced, the nozzle...
  7. D

    Riello Oil Burner not starting when hot

    I've had an intermittent fault with my Riello oil burner. When it turns off it won't restart. The cutout light comes on. When I press the restart it runs through the normal restart cycle but fails to relight. The pump pressure is 8 bar and I've checked flow by bleeding it so no problem there...
    • daveclucas
    • Thread
    • burner
    • Replies: 12
    • Forum: Boilers
  8. 1

    Daikin altherma ashp wood burner solar best way to combine

    Hi All I am a newbie here! I am a sparky by trade and have been rebuilding/extending/developing our property for 3 years! (living on site in mobile home!) The building has being totally refurbished and insulated above the latest building regulations. Upvc windows and doors have been installed...
  9. A

    Potterton Powermax HE boiler burner won't light

    Our heating has only been on twice so far since ive moved in, as far as Im aware. Both the heating and hot water lights are on, we have hot water but the burner is not lighting, so no heating. We managed to get it to come on by simply turning up the thermostat but it hasnt come on since...
    • Alex Dawson
    • Thread
    • boiler burner potterton
    • Replies: 1
    • Forum: Boilers
  10. C

    Heatslave burner lockout

    My mate has a Heatslave that is locking out on the burner, it doesn’t seem to lock out on heating mode just hw, though (and this may be normal ) when it has locked out on hw it cannot be reset through heating mode, that is the lock out light is not illuminated on heating, hot water has to be...
  11. J

    Identifying a multi fuel burner

    Does anyone recognise this what I believe to be a multi fuel burner from the pics enclosed, can't find no info on the unit it's self
  12. B

    Burner setting using a combustion analyser

    Found this, will be of interest to some: http://www.ffs-refiners.com/upload/files/Burner_setting_using_combustion_analyser.pdf
  13. Best

    Bentone B11 burner always locking out.

    Anyone any ideas? Never had bad luck like this! At a boiler with a Bentone B11 burner that would constantly lock out after about 2hours on. Firstly, this burner is only 3 year old & in brand new condition to look at. I have checked nearly everything including the oil getting to burner, the...
  14. B

    Help with bleeding oil burner

    Hi there, I have a Worcester Greenstar Camray 12/18 Utility. I've run out of oil over night and got an oil delivery today. When pressing the red reset button, it sounded as if the boiler would come on again, but cut out after a few seconds. (I pressed the button 4 times, I hope that's not too...
    • Bee
    • Thread
    • burner
    • Replies: 32
    • Forum: Boilers
  15. N

    Rothenberger burner kit

    Ive seen the "burner kit" consisting of super fire 2, bottle, 15 cutters, matt and bag adverised loads recently. I dont want the whole kit just the bag but no merchant will sell me one :bomb: Anyone know where to get one or what does everyone else use for just their whooshing gear?
  16. J

    Gas Supply for Bunson Burner

    I have been approached by a Dental Lab that would like a permanent gas supply for their Bunson burner. Not really clear on what the regulations etc are for this is it something I am allowed to do? It's a domestic size installation with just a combi boiler supplying the Lab and Dentist currently...
  17. A

    FOR SALE: Used but working Bentone burner assy for Worcester Danesmoor 15/19 boiler

    Bentone Inter B9-B oil burner assembly removed from recently decommissioned Worcester Danesmoor 15/19 oil boiler.All in good working order as far as I'm aware. Customer had it serviced about 5 months ago. Manufactured 1999. Buyer collects, or could deliver within 10 mile radius of East...
    • a62vw
    • Thread
    • boiler burner worcester
    • Replies: 7
    • Forum: Boilers
  18. D

    3 storey building CH burner upstairs lowest radiator does not work - WHY?

    It is brand new installation, CH burner on the 2nd floor, 6 radiators on the 2nd floor, 6 radiators on the 1st floor > everything worked more than fine. CH burner is of very high capacity and can provide heating to 20 such radiators. Then I just wanted one additional radiator on the ground...
  19. P

    Anyone fitted a Kiam Buckingham 8kw Log Burner?

    Hi has anyone fitted one of these , need to know whether it can be fitted on a 12mm tile contruction hearth, had ma Heta's only a month and first one ive done since passing, or the manuals would be even better? Thanks guys
  20. P

    Chmney clamp or suspending cowl for log burner

    hi there just done my hetas and am pricing up a job so any help would be allowed, am I allowed to use a suspended cowl to attach my liner to at the chimney pot or do I have to use a plate and clamp? the suspened cowl will save a lot of time and effort, also what's the difference between a...
Back
Top