burner | Page 9

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

burner

Recent contents Top users
  1. townfanjon

    log burner / gas ppe

    Cant find the answer to this anywhere, can anybody help Pal of mine just bought a new house a few weeks ago. It has a logburner already fitted, but since moving in he has seen a old capped off gas pipe underneath it. (50 mm away). We are assuming its 'live'.I obviously want to remove it...
  2. M

    Log Burner installation, Preston, lancs

    Evening lads, Just bought a house and knocking it to bits, i want to fit a log burner/multi fuel burner within the next few months. Don't no anyone so if anyone is local and wants to PM me feel free. Will give more details and my plan once spoke to someone. cheers
  3. K

    ecoflam oil burner intermittent fault

    Hi I have recently been working on an ecoflam burner which heats the cooker part of an Alpha range cooker. The cooker fires up and gets to temperature and goes through the cycle of firing up to maintain the heat but on occasions when it tries to fire up it locks out. The filter is clean and...
    • KevB
    • Thread
    • burner fault
    • Replies: 8
    • Forum: Boilers
  4. H

    Glow Worm EP50B burner cuts out prematurely

    Hello Ladies and Gents. New on here, but have seen many posts from various members, and everybody seems helpful. So, please can somebody express an opinion on this problem. Good pilot light with new thermocouple. New boiler stat New room stat New overheat cut-off Recent 3...
  5. K

    EOBG burner training

    has anyone attended their domestic burner training ? I have just booked myself onto it for the 12th of march 1 place left if any victim wishes to join me £130 excluding vat i looked at riellos but its £150 exc vat and further to go
  6. C

    New oil burner needed

    I have a Warmflow oil boiler 60/90 fitted with a Riello Oil Burner RB1 it is 7 years old had 2 new pumps fitted over the 7 years i was a heating eng may years ago and now retired . From working with these Riello Oil Burner in the past the oil pump is not good and always gave trouble...
    • camper5757
    • Thread
    • burner
    • Replies: 8
    • Forum: Boilers
  7. A

    burner buffeting on common flue

    Hi, new to the forum, I have a sherborne s70c which after running for a couple of minutes starts to buffet. I say buffet for want of a better term it sounds like a whooping noise. there a three of these on a common flue and when any two are running the third can do this but it is usually the one...
  8. S

    baxi fibre burner knackered

    So been to a baxi 133 he plus with a fibre burner or rather lack of as it is ripped apart. Hex looks ok it needs new door seals and electrodes and a burner. Heres the question though coulf you put the ceramic type burner from the 80 and 100 he on this model. Now I know what everyone will say...
  9. Hobo128

    checking burner pressure on cooker.

    How can I check the burner pressure on a gas cooker, I have tried to put my manometer over the injector but it wont seal properly. Any tips please. Also should the burner pressure be the same on all rings or different?
  10. B

    Cant adjust burner pressure on gas valve

    Hi guys, just wanted to query something If the a gas valve wont allow you to re-adjust burner pressure and a) its within spec, +5 or -10% is this ok to leave and just make a note of it? b) not in spec - is this AR
    • beesley121
    • Thread
    • burner gas engineer pressure valve
    • Replies: 13
    • Forum: Gas Engineers Forum
  11. G

    Wall star 15/19 burner replacement

    I am looking to change my hrm burner as it has been giving problems off and on over the past few years. It is over 15 years and was wondering does anyone know what type of burner will fit. The issue seems to be that the wallstar15/19 boiler has a long blast tube of 150mm and most burners either...
  12. B

    Worcester 24si 11 - min burner pressure & pcb

    Hi guys, i went to a worcester 24si 11 the other day, neededa new fan as bearing had gone. Replaced it and decided to check burner pressure. Adjusted maximum burner pressure but there no info for the minimum burner pressure as theres a separate adjustment screw on the gas valve for that? Any...
  13. D

    Riello burner, lock out every week or two.

    I have had this problem for a year. Every week or two the Riello RDB2 burner in my Grant Oil-fired central heating system will lock out. I have cleaned it all out, adjusted the electrode gap, replaced the photocell, replaced the nozzle and replaced the capacitor. All parts were genuine with the...
  14. W

    Integrating a Multi fuel Burner with a combi system etc.

    Hi Guys, I've been on the sniff for an age looking for information on how to go about integrating a, in my case, Greenstar junior 28i condensing boiler with a multi fuel burner.So either can run the rads and water systems. I've come across this site: Heating Innovations homepage H2 control...
  15. C

    Halstead Hero 40 boiiler burner urgently needed

    Hi all I am looking for part number 700580 which is a burner for a Halstead Hero 40 boiler The part is now obsolete and unless I can find one my boiler is basically dead (according to British Gas engineer) Does anybody have one lurking about I could buy please or know where I can get one...
  16. M

    LPG firepit burner

    A custard has purchased this burner from the US of A along with some other bits and Bob's. Unfortunately there is nothing that will screw satisfactorily into the pictured thread. The size is approximately half inch but it's not a BSP thread. Any thoughts on the thread name and where to get an...
  17. J

    Ideal Mini C24 lack of burner ignition

    Hi, looking for a bit of advice on a repair. My ignition PCB is faulty. Ignition relay isn't getting any power so boiler fails to ignite. I have removed and tested the relays which power at 16v externally, the boiler gives 1 relay 29.5v, the other around 0.6v. Any thoughts on how to repair? I...
  18. H

    Gas fire burner below 225mm

    Hi guys now i was taught that if a fires burner was less than 225mm from the floor with no hearth installed then it would be classed as AR . Is this wrong ?
    • herp_lee
    • Thread
    • burner fire gas engineer gas fire
    • Replies: 10
    • Forum: Gas Engineers Forum
  19. D

    Riello burner commercial oil and gas burner course

    For anyone involved in the service and maintenance of the above type burners this course is an excellent compliment to what you already know about burners from burner matching, fault finding and commissioning. Some of the things you are taught will be relative to other burner manufacturers also...
    • Dsgas
    • Thread
    • burner commercial course gas engineer
    • Replies: 5
    • Forum: Boilers
  20. A

    Burner Cleaning brush

    Hi all, I am looking to buy a thin but sturdy brush for cleaning between the burners on back boilers. any one recommend where to get a descent one from experience? Thanks.
Back
Top