connection | Page 3

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

connection

Recent contents Top users
  1. R

    Connection for parallel tap port

    Hi all, Happy Sunday…first poster here so pls be gentle 😊 I have a Nuie Arvan ARV828 basin mixer tap which I am trying to connect H/C feeds to. The inlets are 1/2in BSP parallel threads. The issue I have is I am wanting to properly seal the inlets with more than just PTFE/Fernox. However I...
  2. U

    US bidet seat connection UK

    Good morning. I've purchased a Brondel Bidet seat (basic,non-electric) and fitted it to my UK close-coupled toilet. I knew it would come with US fittings but researched before purchasing and saw that NTP to BSP adaptors were fairly readily available so thought that connection to the cold feed to...
  3. C

    Soil Vent Connection

    I have to connect the UPVC pipe to the ground. There's a connection of sorts there already. The rubber gasket there has perished but I don't seem to easily find a replacement. Even if I did, the old UPVC pipe I have doesn't fit tightly in there and presumably never did. My question is, does...
  4. Stupidearthling

    Internal or external connection?

    Hi Everyone Hopefully a simple question here. I am installing three new water feeds to different locations around the outside of the property. One to the garage, one to the pond and another to the garden. I have two choices. I can pick up the incoming water feed before it enters the property or...
  5. M

    Hose connection to automatic water trough

    I would be extremely grateful to receive advice how to attach a hose to an automatic water trough (for horses) in a field, that has no tap, it has a float - like in a toilet, that is in the water and refills automatically when the water goes down
  6. C

    Is there a suitable replacement connection for this flexi-pipe?

    I'm struggling to post any words here. Apologies for the brevity - can anything be done with the attached to save me having to replace the full flexi-pipe which is inaccessible at the far end? Thanks Regards Carl
  7. S

    Digital Mixer, giving connection error

    Just installed Trito HOST Multi Outlet Digital Mixer and it is giving connection error
  8. X

    soil pipe connection

    Hi all, is there a way to connect a new toilet into an existing horizontal run? The problem is, due to the levels it can only connect horizontally and not from the top of the pipe. Is it ok to use a standard branch connector in this way?
    • XT60033
    • Thread
    • connection pipe soil soil pipe
    • Replies: 7
    • Forum: Boilers
  9. B

    Copper connection on backflow

    Hi, trying to remove copper pipe from sprinkler back flow. Used blow torch to soften solder. Did not melt what ever they used on connection. What could they have used instead of solder ? Thank You . BH
  10. nrgopks

    SharkBite ice maker connection kit adapter leaks

    I purchased a SharkBite ice maker connection kit. The kit came with an adapter to connect 1/4" (3/8" OD) PEX to 1/4" compression fitting. I tried to attach the adapter to a needle-style valve as shown in the photo and the compression connection leaked. Has anyone used this adapter part...
  11. J

    Washing machine connection to flamco safetap

    Hello, we just moved into a house in the Netherlands and are struggling to fit our washing machine. We have a Samsung washing machine with the standard 1/2 in inlet pipe. The wall has a fitting I've never seen before which after research is a flamco safetap (Google Image Result for...
  12. E

    Parts Advice for Gas Hob connection

    Hi, Please can someone advise me on the correct replacement parts to re-connect my gas hob? It is an Indesit PIM 640 AS fitted gas hob and the manual states the fitting is a threaded 1/2 gas cyclindrical male attachment. Do I also need to order a fibre washer or o-ring for this? If so which size...
  13. A

    Help with connection for Grohe Basin Tap

    Purchased a Grohe Basin Tap with has 3/8" flexi tails., but i notice the flexi's have no internal washer. I have purchased 2 Compression 15mm x 3/8" tap connectors from screwfix.... Part No.: 6089R and will fit these into two 15mm isolating valves. The question i have is that will i need to...
  14. D

    Waste pipe connection from basin

    I have a bathroom basin that had a flexible waste pipe leading from the sink into a fixed waste water pipe. The Flexi-pipe had perished away and I can not find a replacement to fix onto the basin to the waste pipe. I have tried numerous flex pipes but none fit onto both.
Im probably being stupid...
  15. T

    8mm copper to 15mm plastic connection

    I have recently moved house and would like to move a radiator from a side wall, to one below the window as is more pleasing to the eye. I understand why it was not placed under the window, as my house is old and has concrete flooring so would be difficult when it comes to the pipework...
    • Tommy o'Toole
    • Thread
    • connection copper plastic
    • Replies: 3
    • Forum: UK Plumbers Forums
  16. J

    3/4" connection for concentric mixer shower?

    Does anyone know of a concentric mixer shower valve that will fit 3/4" threaded connectors coming out of the wall @ 150mm centres? I would like to replace a bar mixer valve (3/4" threaded connectors @ 150mm spacing) with a concentric mixer valve, but concentric mixer valves all seem to fit onto...
  17. A

    New soil stack to toilet connection

    Hi. I'm installing a new soil stack for a new upstairs bathroom. For the toilet, where the 110mm pipe comes through the wall to outside, which pipe fitting do I use? It has to come out and then across to the soil stack, but all the branches and bends are 92.5 or 87.5 degrees but surely it needs...
    • Adrian_P
    • Thread
    • connection soil toilet
    • Replies: 5
    • Forum: Boilers
  18. A

    Underground clay to plastic connection help

    Hi. I need to reinstate a soil pipe. The original connected to clay pipe which is incased in concrete. The pipe has broken (it was backfilled with concrete in the original rest bend) but I don’t want to have to go as far as the manhole (not sure if I even can?!). Please see attached photo at...
  19. M

    Kitchen Sink Waste Overflow Connection

    Hi I was wondering if someone could please tell me how to connect the flex pipe from sink overflow drain in to waste trap below? It is the Cooke & Lewis Waste Kit ‘B’ If I can add pictures then I can show?
    • Mcknze21
    • Thread
    • connection kitchen overflow sink waste
    • Replies: 11
    • Forum: UK Plumbers Forums
  20. rpm

    Can anybody name the connection

    Short story, council bathroom refit 8 days ago then blockage occured outside on a branch between this toilet and the mains resulting in this joint leaking when the water backed up. Any glaring errors here? Thanks.
Back
Top