cylinder | Page 6

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

cylinder

Recent contents Top users
  1. P

    Unvented cylinder wiring

    Hello all I'm replacing 2 unvented cylinder a which are (a) end of life and (b) installed in a way which is clearly not right (no 2 port shut off valve on the heating coils just for a start, and there are other issues). The heating coils are currently controlled with 3 port valves that are...
  2. M

    Cylinder feed and vent

    Have a ground floor hot water cylinder, want to boost hot flow to upstairs bath with inline booster pump. Can't get to pipework near bath, so wondering if I create a new dedicated vent tee'd into pipe just after it leaves the cylinder, then install pump after new vent, and cap off old vent at...
  3. M

    Possible Cylinder or blockage problem

    We had three radiators changed and after this the boiler wouldn't fire. Now we have heating but the no hot water. We have had the Baxi man out and he said we are not covered for the problem. Which he thinks is either the cylinder (which he said may be difficult to obtain the part) or a blockage...
  4. M

    Buffer Tank/Thermal Store addition to S Plan Plus & Unvented Cylinder?

    Hi sorry bit of an odd query here. With the increases in energy costs now and in the future we are trying to find any way to reduce our exposure (retired couple on fixed incomes). We are fortunate enough to have bought solar panels at the beginning of the year but as we head towards winter the...
  5. S

    Unvented Cylinder set up via gas system boiler and time clock

    Hi I wanted some steer from he forum for my set up. 2 storey house now extended on ground and a loft conversion. New plumbing install as of 18months. Worcester bosch 8000 life sysem boiler via natural gas. Time clock with HW / CH split, 7 day digital. 250litre Gledhill Select Indirect...
    • Space_Goat
    • Thread
    • boiler cylinder system unvented unvented cylinder
    • Replies: 15
    • Forum: Boilers
  6. J

    Vent pipe size for vented cylinder installed in 2005-6

    Hey, having searched this forum and last building regs (2000) from around that time... Any idea what the correct size is for a vent pipe for a vented hot water cylinder, gravity fed? I.e. the one that is continuously rising back up to the cold water feed tank for the cylinder? Have discovered...
  7. M

    My t valve seems to be too thick for my shark bite cylinder

    I cannot get my shark bite fitting to fit over the white supposed to be a half inch copper T valve is it because it’s corroded just seem to be too thk
  8. M

    UV Cylinder service sheets / documentation

    Hi What paperwork / test sheets do you guys issue when servicing unvented hot water cylinders? Ive got my G3 quals, maybe the course wasn't great but I don't recall the running through sample forms that should be filled out. I want to give customers some kind of documentation if I do a...
    • MOSSEP
    • Thread
    • cylinder service
    • Replies: 4
    • Forum: Plumbers Arms
  9. H

    Unvented cylinder for ASHP

    Hi all. I have an Isoflo CL170 cylinder with good few years life left in it in my system which has performed trouble-free other than the odd new immersion element. I'm getting a new ASHP fitted and the installer is recommending scrapping the Isoflo and replacing it with a Secon Trade Heatpump...
  10. R

    Pressure loss in new loft (unvented cylinder)

    Hello. I need some urgent advice re water pressure in an unvented system. A few months back, I had my gravity fed system + boiler changed to an unvented cylinder + system boiler. The water pressure following the swap was incredible. We were originally talking about putting in a mains booster...
  11. R

    Megaflo Eco System Unvented Cylinder Loud Bangs

    Hi Everyone, Hoping for some advise / assistance on an issue I have on my Megaflo Eco System Unvented Cylinder which is making a loud band. This occurs when the hot water heating is on and when the cylinder heats up to temperature, once at temperature the motorized valve closes and there a...
  12. R

    Unvented cylinder viability??

    I'm looking at getting an unvented cylinder fitted but want to know if it's viable before even getting a quote. My cold incoming main is only 15mm but I do get a good pressure and flow which doesn't change alot when another tap or shower is used. Would an unvented be possible?
  13. euge595

    URGENT Motorized valve or cylinder thermostate

    Hi, I have no hot water unless I put the CH on, I've changed the HW motorized valve which still needs to be opened manually and I've changed the cylinder thermostat, can anyone suggest my next course of action. Many thanks
  14. G

    Replace leaking hot water cylinder or change to combi boiler?

    Hi, In my 2 bedroom flat I have a Worcester Greenstar 24i boiler and a 200 litre Zip AquaFlow hot water cylinder. The hot water cylinder has started to slowly leak from the bottom and I think it will need completely replaced - quote to replace is around £1000. Given that this is only a 2...
    • gmacdon76
    • Thread
    • boiler combi combi boiler cylinder hot water leaking replace water water cylinder
    • Replies: 2
    • Forum: Boilers
  15. G

    Can I add a seperate header tank to a fortic cylinder?

    Hi I just bought a house with a combination hot water cylinder & cant replace the heating system yet as we have walls to knock down etc where the new radiators would be & the new layout will require different sizes. My GF needs a more powerful shower its a trickle atm. I ordered a pumped power...
  16. B

    Placement of a copper Cylinder for best effect

    I Cannot installa unvented cyclinder because my waterflow rate is too low. I am therefore thinking of using the old attic tank feeding a cylinder system. My query is, Which is the better of two cylinder placements. Water fed to a cylinder in the loft with hot water fed from top of cylinder...
  17. M

    Continuous noise from indirect water cylinder

    I have moved into a house with a Joule Cyclone CY200L indirect cylinder in my loft. Recently it seems to continuously be making a noise, as if it's filling up or heating up, I'm not sure which. The thermostat on the side is set to 55, when I turn it below 50 there is a click and then the noise...
  18. S

    Help with unusual tap with non-standard cylinder

    I have a leaky tap, so I thought I could fix this with replacing the washer, however, when I took the cap off, I could not get the wrench in there to grab hold of the nut to turn! This is because the nut part of the cylinder is sunk into the casing (please see photo in the attached links)! I...
  19. C

    Unvented Center cylinder no hot water

    Hi all, I’ve got an issue with no hot water from Center 300L unvented Cylinder on S Plan plus system. All Electrical controls working fine. Only way to get hot water to the taps is by using immersion heater. Any ideas what could be up? Thanks in advance.
  20. B

    Nightmare boiler and unvented cylinder installation

    Hello and happy Easter everyone, hope you're having more fun than me! Friendly advice needed please. Long story short, we arranged to have a 2 day 2 engineer installation of system boiler and unvented cylinder, replacing a heat only boiler and unvented cylinder with broken coil. Got 3 quotes...
    • BollyR
    • Thread
    • boiler cylinder installation unvented unvented cylinder
    • Replies: 41
    • Forum: Boilers
Back
Top