filling

Hi all, thanks in advance for any advice you can offer. I have a Remeha Selecta Combi, 8 years old. Hot water working ok but no heating. Thermostat is calling for heat, signal being received, boiler not kicking in. Pressure about 0.6 bar. In the past I have (perhaps coincidentally) topped up...

Never liked the key yype filling of these boilers, looks like they have found a better way... Worcester 7716192610 Keyless Filling loop

I have got a problem with only 1 Radiator. It keeps filling up with Air and needs to be bleed. Its the radiator which is nearest to the airing cupboard. In the airing cupboard there is 2 2 port valves, pump and By pass Valve and Cylinder. Anyone got any idea's what could be causing the problem...

Hi. Can someone please tell me how to take an Ideal Standard filller/float mechanism apart please? The filler keeps lightly leaking from the top (by the arm) and also leaks into pan constantly. The arm/float and filler is all one mechanism with the siphon to the right of it. (I would post a...

Hi, newbie here, but have been on site loads for info!! Question, I want to move boiler filling loop from under worktop to above.WHY cos I struggle to get up and down on my knees!! Thought by having loop nearer the boiler I could check pressure easier,rather than getting up and down. Boiler...

I've had a google around and don't seem to be able to find the solution for this toilet that won't stop running. It's bad timing too as I just had a meter installed! I'm really hoping someone here might be able to assist me as I can't really afford a call-out and a subsequent markup on any...

Hi folks, I wonder if you can help...I had the above combi-boiler installed 2 and a half weeks ago, all working well until this morning there's an F22 error and the pressure is showing at 0.4bar Apparently I need to fill the system via the filling loop (is this right?) - I've got two...

Hey guys, Before I start I'm just stating ; This is merely a QQ, I am not about to commence work on it, I am just inquiring on a situation that is happening at a friends house down the road who has the plumber who installed the system (and I believe is qualified .. ) en route to fix the issue...

Last night, went to flush the toilet and the water entering the cistern was incredibly slow, almost like there was no water pressure. However there is pressure as all the taps are as they should be. Ive not had much experience of these so can someone advise me on what I need to do? Reading it...

hello, I have a stupid question about regulations. Is it legal to fit a filling loop using compression fittings? I replaced all radiators in my house, soldered a few pipes and I feel confident I could do it myself. I've got a filling loop with two check valves and a few spare tee compression...

turned the key and the slotted valve but no joy any ideas apart from fitting an external filling loop?????????

I've not seen this type of filing loop? is it an old type thingy or some form of improvisation? also, the electric power cable seems to have a dodgy connection and is going behind the pipes...is this ok as i would personally never do that as it's next to pipes that become very very hot.. oh...

Hi guys. In need of some help so have come on here to see if anyone can tell me what I need to know. Basically the other day our boiler lost pressure, so yesterday a repair guy came out and sorted it all out. New boiler is needed due to something wrong with something to do with compression (As...

Bear with me all you plumbimg experts, this will seem a trivial question for you. I have seen on numerous posts on some forums about cisterns and cold water storage tanks that are noisy fillers. When asked to describe the noise it is generally along the lines of "it sounds like water rushing...

Having problems my boiler (ideal logic 30)had a f1 fault last week so toped pressure up with filling loop everything worked fine then same fault occurred 5days later so tried to fill up again but this time when opening the filling loop nothing happens cant hear any water going through and...

Hello, Installing a vokera vision 25c. What is the script with the filling loop? In the kit I had no washers, if there are any. Thinking tape and jointing compound. Or are there fibre washers? Thanks for looking.

Can't seem to fine any local suppliers that stock this type of filling loop. I want to fit a remote one in my airing cupboard as the boiler is in the loft. Anyone know of somewhere that may stock them....??

Hi My boiler packed up(would not fire up and gave an error code) last week (3 weeks after annual gas safety check) :thinking: when i looked at it the pressure was on 0 and have heard a lot of boilers will not even attempt to fire up if the pressure is wrong. so after a bit of research online...

Hello, I've recently moved in to a house with an Ariston MicroCombi boiler. The pressure gauge is indicating a little under 1, and there's a slow leak from a radiator so I know I'm going to have to re-fill the system at some point, once I've repaired the radiator (everything is working fine at...