flush | Page 9

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

flush

Recent contents Top users
  1. M

    Geberit Rak new style (dual flush) button

    First of all apologies if this has been posted in the incorrect section. Is anyone here familiar with geberit flush valve type 240 and its dual flush button? I had much trouble identifying it but thanks to google im 95% sure i have the right one. My council installed a dual flush toilet a...
  2. A

    Replacing Fordham Flush Panel toilet fill valve

    Has anyone replaced a Fordham Flush Panel toilet fill valve with modern one with integral overflow mechnism?
    • a new one
    • Thread
    • flush replacing toilet valve
    • Replies: 4
    • Forum: Boilers
  3. Roverspete

    Toilet Flush valve brand.

    Hi All, Sorry being really lazy today, has anyone got a clue which brand makes this Flush Valve and fill valve please? Customer could only say it was made by WRAS lol If not it will be Viva’ed up new Friday. Thanks in advance. Pete
  4. M

    Urinal flush valve help?

    hi guys. Currently stood in front of a wall hung urinal that slightly over fills on flush. It has a p trap rather than a bottle would this make any difference to flow rate? I can’t seem to adjust the flush valve. It’s not a cistermiser it’s just a constant fill and then at a level the flush...
  5. ShaunCorbs

    .....flush cone......

    anyone seen a mechanical flush pipe cone / washer i can remember seeing one somewhere but i cant think where
  6. N

    Flush pipe connector not fully in.

    The flush pipe connector will not fully insert. The first 2 flanges are completely in, the third partially. There is not much room between the pipe and the input. When I remove the pipe to check, the connector has not slipped up the pipe. I marked the pipe to ensure it has gone in as far...
  7. P

    Pneumatic flush valve failing

    Hi all, I've got a problem with a Gerberit pneumatic dual flush valve. It has two buttons on the actuator plate, when pressed individually they do nothing, you now need to press them both at the same time in order to get it to flush. The toilet was installed around 5 years ago with no problems...
  8. Bogart

    Ball park figure for a flush

    What would anybody care to hazard as a fair price for a, pre oil boiler install, flush. There are 20 radiators in total. Am awaiting a figure from a heating firm and am not very expectant on a good price as they seem to come up with random figures. They gave me a figure 2 years ago for a Kamco...
  9. J

    Help with putting dual flush valve back together :/

    Hi Folks, A have-a-go-hero here. I had a leaky toilet and cleaned up the rubber washer. Annoyingly I didn't take a photo of the (amstd fastparts) valve parts on removing and I'm definitely doing something wrong on the re-assembly. Can anyone point me in the right direction of a photo or...
  10. A

    Gerberit flush pipe seal replacement - help

    Can anyone advise how this is fitted? Had a leak from here and decided to try replacing the washer with a new one - although leaks on both occasions seem to be coming from the gap left in the plastic clip on the bottom. Just want to ensure i have fitted the rubber seal correctly although from...
  11. U

    Weeping WC cistern siphon/flush pipe joint repair

    I have a concealed WC cistern. The seal between the cistern tank and siphon has started to weep ever so slightly. Access to the cistern is very difficult. I know the correct thing would be to remove the siphon, clean the seal landings and reassemble. However, to this I would have to get direct...
  12. B

    Powerflush Required following new Boiler Install and Chemical Flush

    Good evening, Please can I ask for some brief advice. Last month I had installed a new boiler (Ideal 18kw) by a national firm. It's a townhouse with 4 floors, 10 heaters, a hot water cylinder and also a tank in the attic. The heaters look in good condition and have been retained from the...
    • brett1985
    • Thread
    • boiler flush install new boiler
    • Replies: 7
    • Forum: Boilers
  13. K

    Leaking side entry flush valve

    Hi. Looking for some hopefully very simply advice. I needed to replace a side entry flush valve on an enclosed toilet. I have installed the new flush valve but am having problems connecting it to the mains water supply pipe. The flush valve is 1/2" and pipe is threaded plastic. The mains supply...
  14. V

    toilet with powerful flush?

    I need your help please. I'm looking for a toilet with a powerful flush like the American Standard Champion. Champion 4 MAX Right Height Elongated Toilet - 1.28 GPF - American Standard Can anyone recommend toilets available in the UK/EU that are as good as the Champion? Thank you very much
    • vanas
    • Thread
    • flush toilet
    • Replies: 17
    • Forum: Boilers
  15. CorgiDirect

    Kamco and Norstrom Power Flush Machines From CORGI direct

    Kamco and Norstrom Power Flush Machines From CORGI direct VIEW HERE Professional, Versatile and Easy to Use. Professional Products For Professional Engineers
  16. V

    Should I attempt to mains flush my CH system?

    I just moved into my new flat and the boiler is probably around 20 years old. It's a sealed non-condensing Valliant Turbomax VUW 242 and on it's last legs. Just got the circuit board replaced with a refurb off eBay while I save some pennies. The system is a mix of 15mm and microbore copper...
  17. O

    Duravit Stark Toilet Flush Question

    I have a Duravit Stark 1 close coupled toilet which has begun to flush poorly. The cistern functions fine, but there seems to be a partial blockage just where the water enters the toilet pan which results in the main stream at the back of the pan being reduced. I have investigated and there...
  18. CorgiDirect

    Excellent Prices on Kamco Power Flush Machines

    https://www.corgi-direct.com/kamco-products-17951-0000 …
  19. D

    Power flush prices average

    What's an average price not premium as in London for a standard powerflush of up to 10 rads in a domestic property? I have a chance of the kit and wondering if its worth the money
  20. A

    Which Dual Flush Push Button Do I Need?

    Hi, I have a dual flush push button that needs replacing (or perhaps just the rods only) and I don't know which kind I need or where to get one. I don't know which make or model toilet I have as there are no markings on it other than "L34" stamped on the underside of the cistern lid and what...
Back
Top