glow | Page 10

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

glow

Recent contents Top users
  1. D

    Increasing pressure in Glow worm Betacom 24c boiler

    The forum won't allow me to link a photo via URL!? I can't see anyway to upload it!? Help please. Hi all, Please can you advise how I would increase the pressure in my Glow worm Betacom 24c boiler (currently at .5 bar). Please see photo attached. Many thanks indeed, Daniel​
    • djs43
    • Thread
    • boiler glow pressure worm
    • Replies: 5
    • Forum: Boilers
  2. D

    How to increase pressure in Glow worm Betacom 24c boiler

    Hi all, Please can someone confirm how I increase the pressure in my boiler which is currently sat on .5 bar using the filling loop i.e. which valves I need to open? Photo attached. Many thanks indeed, Daniel
    • djs43
    • Thread
    • boiler glow pressure worm
    • Replies: 3
    • Forum: Boilers
  3. S

    Colleague looking for help with a glow heap head scratchier.

    A good friend and fellow gas engineer of mine who is not currently a member of the forum (at least not with gas safe private forum access) has been to a British gas 330+ / Glow worm (not a hxi this one has an aluminium heat exchanger). The Boiler has an Ignition fault, when firing the burner...
  4. W

    How do you top up this glow worm boiler?

    Is it the blue bit? Couldn't see filling loop unless boxed in below.
  5. D

    New Glow worm install issues!

    Good day all, So i fitted a Ultracom 30sxi last year and all worked well. Up until a month or so back when the boiler seemed to stop modulating properly. It continues to fire, ramp up, hit temp and then stop. It does this every few mins.... Weekend just gone my plumber and i (im an...
  6. S

    Glow Worm vs Ideal Logic vs Vaillant vs Worcester

    Hi, I am considering a new combi install. I have been quoted for 4 choices of boiler... 1) Glow Worm Ultracom 30 CXi 2) Ideal Logic+ 30 3) Vaillant Eco Tech 831 4) Worcester 32CDi My rads are only 8 years old and clean inside as far as I am aware. Your opinion is welcome ( see Poll above...
  7. G

    Glow Worm Ultimate 30ff sparking but not lighting

    Hi, I've checked the solenoids and the gas valve, all ok. Boiler just sparks, there is gas there, but it won't even ignite the pilot. After some research on this boiler, someone said that the electrode leads have to be in exactly the correct place in the grey seal of the boiler? I've got to...
  8. stings27

    Glow Worm 30cxi- No Display

    Hi all. Posted this thread on the public forum but it got closed due to me not having 'Yellow Badge' Anyway, problem solved... it was the PCB (£187.43 + ) :whatchutalkingabout Googled problem and found this on you tube...... http://youtu.be/hkRNinKJUbs E-mailed link to customer and she told me...
  9. B

    Glow worm 65-80 BF - anyone got a installation manual - advice needed also

    Hi guys, been to to look at a glowworm 65-80 conventional boiler. Long story short it's spewing out co at 1300ppm before I got scared and removed my analyser in case it damaged it. the boiler needs one heck of a good clean and a few parts as follows sight glass sight glass gasket combustion...
  10. stings27

    Glow Worm 30cxi- No Display

    Hi all Sorry for this being vague, but on my way home from work got a call from a friend who said they had had a power cut and the heating/hot water had gone off. I thought it would just be a case of resetting but my friend said she had gone to the boiler after the electric had come back on...
  11. J

    Glow worm Betacom 24C Flame Failure Problem

    Hi All, Been through the older posts but not found what I hoped for. Been out to Betacom 24C with a flame failure fault. Disconnected condensate sensor (condensate is clear Changed ionisation probe Changed main PCB board Checked earthing Still no joy. Still shows flame failure fault...
  12. J

    glow worm 30ci - losing pressure overnight, leaking from unknown place

    Hi all complete novice to boilers, just bought my first house and having a few problems When the heating is on, there are no issues, no pressure loss, no drips, nice and warm. When i use the timer and the heating clicks off overnight, i awake to a cold house and the boiler not coming on...
  13. R

    Glow Worm - betacom 24 combi boiler

    Morning all, i'm new to the site looks very informative - i have a few questions that i'd like to pose if i may. over the past few days i've been having issues with my Boiler; the system sort of works but i'm not sure if its working as it should. I;ve made the mistake of...
    • Red11
    • Thread
    • boiler combi combi boiler glow worm
    • Replies: 6
    • Forum: Boilers
  14. B

    Glow worm hideaway 100B - pilot keeps going out

    Hi guys, customer has a glowworm hideaway 100B BF and the pilot keeps going out. Been to relight it a few times and I fires up straight away. Thinking the gas valve might be faulty as thermocouple has been replaced. The customer however has now told me that everytime the pilot goes out. Her 2...
  15. G

    Timer on my Glow Worm Betacom 24c Boiler Not Working - Please Help!

    Hi there, I don't know if anyone can help, but the timer isn't turning the heating on on my Glow Worm Betacom 24c Boiler. Does anyone have any advice on getting it to work? Or do I need to call someone out? Cheers, Gem
    • Glovesay
    • Thread
    • boiler glow worm
    • Replies: 4
    • Forum: Boilers
  16. Kewat66

    Glow worm 30CXI F1 fault code

    Hi All, Attended a breakdown today on Glowworm 30CXI. Boiler started to go through the start up sequence, when igniting I was getting a spark for 1 second or so then boiler went into lockout and F1 code appeared. The manual stated gas supply, igniter issues etc. I have checked the gas supply to...
  17. R

    glow worm 60b ff bafflement, stumped me!!

    glow worm 60b ff fault. cant work this one out so some help be appreciated please. boiler fires and runs ok. sometimes it comes on for 10-20 mins then takes an hour to re-light. rads get very hot. pumped heating and pumps ok. gravity hot water. no stats. randel 103 controls. fan ok. changed...
  18. R

    Glow worm 24CXI problems

    Hi there, further to my previous question regarding the pressure display dropping to 0 bar before gradually increasing back to normal, things have progressed in a negitive way......... I have now had a fluctuating pressure display followed by an F12 fault code which I believe relates to the main...
Back
Top