I have already updated this from a TRV3 using TRV4C conversion kit, including swapping over the black plastic locating ring fitted on the top of the body with the support ring included in the kit.
Now the head has broken do I need to buy another TRV4C conversion head or will a normal TRV4 head...
Following on from my previous I have now received my Bulldog Thermostatic Valve Head as pictured below and removed the previous ring however I am finding it hard to find the position for it to slot into place and turn the ring to fix into place - any advice for a extreme novice like me?
I have snapped the head off my bulldog the thermostatic valve - are the heads interchangeable with other brands and will they be able to easily replace if the pin looks like so?
Hi,
I've got a Drayton Thermostatic Head that is totally stuck on 0, i.e. can't twist it round. I've taken it off the radiator and it still won't twist at all, it's almost like it's locked somehow. Is there an easy way to free it? Thanks in advance.
Hi All,
Been doing a bit of self-fixing recently and got stuck on this repair. What should I be expecting and how do I go about fixing the switch? As you can see in the pictures the pull handle just came out completely. Thanks.
Hello all, first post and in need of assistance desperately!! Im trying to remove my shower arm and struggling..... im no plumber and followed some advice and hit a snag... my shower in question is an Aqualisa white varispray, iv located the grub screw and removed it and was expecting the arm to...
I currently have a Wickes positive head pump fitted but when trying to use shower have to run basin cold tap to keep pump running rather than on/off/on/off etc.
So I'm going to fit a negative head pump ideally looking at a Grundfos Amazon/Watermill as these have inlet & outlet facing upwards...
Hello,
I need to replace circulation pump head for Wilo Rsl 15/5-3 Ku.
Does anyone can explain me if i need to replace the pump head from the exact same model or are the pump head interchangeable?
And if so can it be swapped out with something nonWilo as people around me have had quite some...
Would anyone know how to remove the two kitchen tap heads so that I can change the washers?
The taps are Grohe kitchen taps
There is no screw under the tap covers
There are no grub screws
I cannot pull the heads off of the tap using reasonable force.
Hi All,
I am looking for a replacement TRV head, same brand or equivalent, as the one pictured.
I can't seem to find any matching ones on Google, so would be grateful for your advice.
Many thanks in advance,
CB001
we have mira excel bir shower and the shower head is not looking good all the chrome is coming of and we want to replace it. we canot get a replacement as they do not sell the logic bir head anymore it is only available with the full shower?
we had bought a difrent shower head but when fitting...
Hi, just had new mains pressurised heating system and boiler put in and new bathrooms. Old loft tanks gone. New floor piping in bathrooms, but older piping left in kitchen.
The water coming from the rainshower heads is weaker than the handsets attached to the wall, which are at really good...
Good afternoon!
Is there any chance I can still find this model of bracket slider somewhere or is it way too old?
https://www.showerdoc.com/newteam-spirit-rail-bracket-slider-white-sp-280-0590-wt
I broke it today and I don't want to change everything just yet.
Thank you.
I had a look at a job tonight new kitchen and conservatory revap everything being altered and swapped around plumbing heating ect , while i was there they asked me to have a look at the shower pump which is a few years old ? they recently had their shower room redone but the new shower doesn't...
I'm trying to use the standard shower pipe and a shower wand without having to install a diverter since the tile work is already done. Is there anything available like in the sketch?
I have just had a Salamander CT60BU negative head shower pump reinstalled after the previous same pump failed. The old pump initially after installation, would intermittently come on after use. This would occur every 10mins or so and then after time there was a period of an hour. after a week or...
so long story short...
old shower going hot and cold
new shower installed
new shower going and cold
heat exchanger plate replaced
shower still hot and cold
kitchen hot tap (not a mixer staying hot)
just removed the shower head on the new shower to test the water coming directly through...
I need to find an apron shower head which fits an 1980s arm. The thread on the arm is either 7/8th inch or possibly 15/16th inch. It is unfortunately neither g1/2 not g3/4 thread.
Can anybody give me a link to an apron shower head (my current one is 5 inch diameter) which will screw onto my...
evening all.
Called out to this boiler late last night. No HW.
Pressure was down so checked expansion vessel etc and topped up. Hot water demand fires boiler which lights and then quickly reaches 97 odd degrees before shutting down. Get an initial blast of hot water through the pipes then just...