high | Page 5

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

high

Recent contents Top users
  1. R

    Gas usage question - crazy high consumption

    My rented accommodation currently has no boiler control whatsoever: no timer or programmable unit. I need to control the heating at the boiler by either increasing or decreasing the flow temperature and turning it down low at night. I will be soon be fitting a smart control system (such as a...
  2. L

    High Level Cistern Leak

    Hi all I’m posting a new thread to my first a couple of weeks ago. I’m at my wits end trying to sort a leaking high level cistern that is leaking from the base where the flush pipe connects. I have already replaced the syphon flush with a new one (Dudley) . The issue is the diameter hole size of...
  3. L

    High Level Cistern Leak

    Hi all. Today I attempted to fix an old leaky high level cistern that was leaking from the base of the cistern. I replaced the cistern flush (Dudley) but noticed the hole diameter on cistern was quite large compared to the inlet pipe ( circa 48 mm cistern hole vs 32 mm of inlet pipe) after...
  4. E

    D2 plastic pipe instead of copper due to high cost.

    Hi all, can anyone suggest a plastic pipe and fittings with resistance to high temperatures conforming to BS? Thank you in advance.
  5. D

    Noisy Ceramic Taps under high pressure.

    Hi all, i have an unvented cylinder with balanced cold feeds. The cloakroom basin monoblock tap is under 3bar of balanced pressure. As the basin is very small ive had to turn down the isolation valves to stop water flooding. Obviously this has made the taps very loud at night. Is there a way of...
  6. P

    Best high flow water softener?

    Hi All, posting for the first time so hope this question is in the right place. Which water softener would you recommend for use with a megaflow system where you want to maintain high flow rates in all areas including the ensuite bathroom in the loft?
  7. Dan

    *High Fives You

    Continue reading...
  8. W

    High pressure solvent welded plastic pipe

    Is I believe what this is. Posted a pic of some a while back and think Shaun identified it thus. Want to change the inlet and float valve the pipework pictured feeds. I know in both instances I could change washer but want to have a plan B and C. Am I likely to find that my fibre washers, hep...
  9. K

    Low min output / high range modulation?

    Hi, I've not been on for a while but I could do with some help if you can. I've a combi boiler to fit in a small anex, I dont reckon it needs much more than 3-4Kw. Would be nice to fit a boiler that is well suited and so I want a combi that will modulate down to around 3Kw (like a 10:1...
  10. S

    Vaillant pressure dial very high

    hi there just checking if there is anything else i can do before i get a plumber in to attend to my boiler. yesterday i noticed that the pressure gauge on the Vaillant boiler was off the scale, it was past the red (see pic 1). I checked around and was advised to bleed the radiators which I did...
  11. C

    Boiler Flues in High Rise Blocks of Flats Deemed Possible Fire Ingress Point on Post-Grenfell Fire Regulations Review

    Sorry - I should have posted this in the Central Heating section. Hello All, I don`t know how many Members would be affected by this and at present it is only a Boiler Manufacturers interpretation of possible amendments to the Building Regulations Fire protection relating to Boilers in Flats...
    • CHRISX
    • Thread
    • boiler fire high
    • Replies: 4
    • Forum: Boilers
  12. Steve weightman

    High output gas fire

    I'm looking to supply and fit an outset convector fire and need a decent looking LFE with a good output I've seen the Robinson willey firecharm at 4.4kw is there anything bigger. Thanks
  13. M

    Boiler I. D. For high reading on analysers

    I have to go to a boiler tomorrow that has been classed as I. D dangerous by another engineer. I haven't fully read the Cp12 they have been issued. Surely this means a C0/C02 ratio greater than 0.008. If it was between 0.004 and 0.007 the appliance would be at risk. Thanks for any input...
  14. Rob Foster

    Lochinvar High Efficiency Boilers

    Based in Banbury, never heard of them but its always good to explore ...anybody come across this outfit. ? Rob Foster aka centralheatking
  15. H

    Please comment on the quote - too high

    Hi everyone, we bought a house with very old radiators and would like to have them replaced. The plumber quoted us 9k for fitting 14 radiators with thermo valves, 1 bathtub and 2 shower enclosures. This comes on top of 1700 quote which includes installation of 2 wall hung toilets, splitting our...
  16. B

    Vaillant ecotec pro high fire

    For gas ratings does anyone know why when I put some ecotec pro's into high fire (p1) the temp goes sky high and shuts off? Had it in a newer one other day so it's not rubber hoses Method I turn the time switch to on, room stat up, select p1 and open hot tap. My thinking is: Blocked plate...
  17. A

    Worcester Bosch filter fitted too high?

    I have had a new 32 CDi Compact WB boiler fitted recently,along with a Greenstar filter. The filter has been fitted very high up, about 4-5 cm from the ceiling. Watching youtube videos, it seems the lid has to be unscrewed and the filter lifted out from the top. Can the filter be unscrewed (top...
  18. C

    JAPKAP high level cistern restoration help!

    hello, I’m currently attempting (with very little knowledge) to renovate an old JAPKAP toilet cistern. I’ve so far fixed the wooden box, the lead is fine and flush arm is being re-cast. However I’m really unsure of how to repair the flush pipe (I think that’s what it’s called) as it was...
  19. N

    Fast flow vs high flow waste?

    Hi guys - what is the difference between the two waste types. As I understand both enable water to drain effectively and both can be used with shower trays but how do we know which one to buy? Also from the sizes they both come in 90mm. Are Mcalpine wastes the most effective or can I just go...
  20. D

    Classic ff360 high pitched whining

    Hi Classic ff360 makes intermittent high pitched whine when gas kicks in. Lasts maybe 2-3 seconds and repeats each tine gas kicks in. But then won't do it fir a day or two and then starts again. Fan bearings lubed duribg last service but of course made no noise the day they came out! Any ideas?
Back
Top