power | Page 2

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

power

Recent contents Top users
  1. T

    power off no lights showing

    hi all , had a strange one this morning, boiler just went off ,dead no lights nothing. checked electric no power cuts everything else on in house, tools out then first checked power to spur , on, checked power from spur, on , switched off at spur removed cover to boiler (intergas 24/28) ,pulled...
  2. C

    Power shower to electric shower

    Hi, I've just changed from a system boiler to a combi, and was told by the engineer that the current shower I have (Mira Event XS thermostatic) isn't compatible. Is it possible to have this one removed and an electric one installed?
  3. J

    REMS Solar push or a KAMCO power flush unit HELP ME CHOOSE

    Ive looked at the tech specs and it seems that the REMS has a lower flow rate but higher pressure at 5.5 bar. the Kamco has a higher flow rate so i understand that will be best for flushing a dirty system, however its maximum pressure of flow is under 2 bar. I wish to use a mashine for...
  4. J

    URGENT what is the best power flush machine and where can I buy it

    what is the best power flush machine and where can I buy it
  5. J

    Radiators top half hot & bottom half cold/warm---to do power flush?

    Hi all, I had my new boiler and 13 radiators installed in July last year, but since installed all the radiators always top half hot and bottom half cold or warm. I know that if radiators top half hot bottom half cold/warm, it indicates there's sludge in the system. But as the radiators were all...
  6. T

    Power Shower Issue: Advice please!

    Hi all, Just looking for some advice - moved into a new property in last 3 months. Today when taking a shower, AQUALISA Power Shower cut-out, and when tried to turn back on - v.low water flow coming through. Finished the shower in another bathroom - water pressure was fine for that shower...
  7. M

    Power flush before or after fitting new boiler

    My plumber's quote for fitting a new boiler (Ideal Logic Max Heat only 24kw) says he will "use a power flush machine that will flush all the black dirty water once the new boiler is installed and add heating inhibitor" Is that correct ? will it send the sludge etc into the new boiler or should...
  8. T

    Whether to power flush a 40 year old central heating system?

    I’m currently looking into replacing my 20- year-old Ideal Classic FF 360 gas boiler in a 70s semi and have been getting various quotes for a condensing conventional boiler, as we don’t want a combi. The current boiler works well, we have it serviced every year via British Gas Homecare, but...
    • Tim Hardy
    • Thread
    • central central heating flush heating heating system power system
    • Replies: 8
    • Forum: Central Heating Forum
  9. T

    Alpha boiler power cut

    Had a power cut now alpha gas saver 34c boiler is dead. Any ideas please
    • Tonia Burchell
    • Thread
    • alpha boiler power
    • Replies: 4
    • Forum: Boilers
  10. CorgiDirect

    Kamco CF40 & CF90 Power Flush Machines Now In Stock !

    Kamco CF40 & CF90 Power Flush Machines Now in Stock! Due to Popular Demand. Order Today While Stock Lasts Power Flush Machines - CorgiDirect - https://corgi-direct.com/power-flush-machines-18089-0000
  11. R

    Using gas when power is off

    We recently had a power cut for 3 days and when it came back on I thought I would have a look at the smart meter. As expected I had 2 full days of no use of electricity. However when I went to look at my gas usage it looked almost normal usage during the whole period. Gas in my house only...
  12. GeoffG1

    Y plan provides HW & CH irrespective of request, turn of the power and

    I have replaced a danfoss timer /switch on a older system to a Drayton LP522 which consist of a hot water cylinder (heater not working) with a cylinder stat. A Honeywell y plan 3 port, a pump and a back boiler but no thermostat. I have checked and checked the wiring and all seems correct...
  13. N

    replacement model for a Redring Expressions 520TS power shower

    Hi chaps - can anyone recommend a replacement for the above? keeping it as simple as possible please....hot and cold inlets are on tight side as is the cable....cheers Dave
  14. P

    Power Flush after visit

    Hi I have recently had a visit from an engineer as I am covered under a homecare agreement I've had for around 18 years. This was for a leaky draincock valve. When I asked them to add inhibitor due to advice I received on this forum he said he would but then pulled out a pipe clogged with...
  15. R

    Electric power shower

    Could anybody advise me on which power shower to buy for a mains water fed low pressure system preferably with its own built in pump , not sure of the electric power in the 1 that’s in use at the minute , don’t mind paying for a really good power shower Many thanks
  16. G

    Can I disable the pump on a power shower?

    Hi, I have a Mira GoPower in a bathroom. I'm getting my system upgraded to unvented with an accuboost pumped cylinder. Whilst I am planning a bathroom refurb (new tiles, tray, enclosure, mixer etc), can I turn off the power element to the shower and use it as a straightforward mixer on a...
  17. T

    Chemical and/or Power Flush?

    Some more plumbing advice, please. I am getting a new boiler installed and this includes a Hot and Cold Chemical Flush of the system. Do I also need a Power Flush or is the Chemical Flush sufficient?
  18. C

    Weather cutting out Biassi and power flushing question

    Hi, would appreciate any thoughts/best suggestions with this. I have an 8 year old Biassi Riva Plus HE 28 Combi in the garage. Its had a few issues this past year but generally works well . Thinking of either fixing its existing 2 issues or replacing it with a new one. Prefer the former . The 2...
  19. G

    Power flush before blocked heat exchanger renewal ?

    Evening All We are having a new heat exchanger fitted to a Veissmann boiler, the boiler is only six months old, the installers carried out a power flush but only after the boiler had been running for about a fortnight, then after six months it failed to heat radiators to temperature. Viessmann...
  20. Riley

    Power in the van

    Hi guys looking at upgrading the van and am looking at putting some sort of inverter set up in place. Now I know nothing about these other than I know pure sine is less likely to damage whatever is plugged in. Does anyone have experience of these at all?? Literally JUST looking at it recharging...
Back
Top