shower | Page 4

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

shower

  1. vertexape

    Shortening a shower wall elbow fitting

    Hello, I have to be install a shower elbow, I like the look of this one, but I think the maximum thread length I should screw in is around 40mm (as I'm not sure exactly how many turns it will be towards the end to get it aligned and snug) is it acceptable to cut down an elbow that has a...
  2. D

    plumber to replace bath with shower tray

    Sounds simple but I have already had a withdrawal. I live in Hull. The bathroom floor is very thick concrete because I live above a set of garages. Interested?
  3. benj987345

    Can anyone help an idiot diyer with a shower tray?

    I've got an issue with the shower tray not being totally flat. As you can see from the photos, it is about 7mm out at one side. It's leaning towards the waste end though. The shower tray is pushed underneath the tiles. My mate did the tiling and I now realise that we should have put the shower...
  4. R

    Bath/shower with no hot water

    Hello, We hade a problem with our hot water not working in one of our bathroom's (all other outlets were working) Therefore we got the Thermostatic Shower Valve changed and everything was working again. However a few days later, both hot and cold no longer works for the bath and the hot...
  5. W

    Is My Shower Cock Stop Leaking ? Can I Change The Ceramic Cartridge ??

    i can't tell if my shower tap (cock stop) is leaking or not ...............so after showering, the shower head will drip fast for 2 hours, then drip slowly after that...........i put a bucket under the shower head to collect the water for 26 hours the first time.............then 19 hours the...
  6. dave100

    Expiry date on Mapei Shower waterproofing kit - One month ago

    Hello, A year ago I bought the Mapei Shower waterproofing kit from B&Q, the one that comes in a bucket and has the waterproofing material and the tape. Circumstances changed and I was not able to do the shower upgrade until now. I had a look at the bucket and see that the product seems to...
  7. magnumpl

    Macerator pump for a toilet & sink using existing shower pipe

    Hello. I am planning to build a small half bath in my garage, next to a washing machine, using old showers plumbing. There was a stand-alone shower in the garage which has been removed. Unfortunately the pipes are only 1.5" on that side of the house since there's no bathroom and the house is...
  8. N

    Power Shower Working OK then runs cold.

    We have a pumped shower with a thermostatically controlled mixer valve. My wife complains that when she is having a long shower (hair wash etc) the shower runs at the right temperature for much of the time but suddenly changes to run cold, usually during the hair rinse time, for no apparent...
  9. angy101

    Water Pressure Shower

    Hi I moved into a property where the pressure is slightly low and they have this super duper shower but pressure is somewhat lacking. I have had water company out and they did do a check and they found the flow rate reduced but they mentioned about the inside stopcock/tap should be changed just...
  10. fango7

    Shower leaking into wall downstairs

    Hi all. Shower is leaking into downstairs when water is being aimed at wall . All sealant has been redone on outside and between shower tray and wall at the bottom on inside , can’t spot any leakages here. It runs down the wall downstairs beneath shower in lines , when water is sprayed at the...
  11. fango7

    Leak under shower along wall and ceiling

    Hi all, I have a couple of leaks coming under shower tray downstairs. One is along the wall so think might be joint between wall and tray and the other seems to be near waste tray, there is a slight hairline crack in shower tray near waste . This happens when I leave the shower head near the...
  12. A

    Bristan 1901 Shower Cartridge replacement problem

    I'm replacing the shower cartridge on my Bristan 1901 Thermostatic Exposed Dual Control Shower (Top Outlet). I have removed the cap and screw but the temperature handle won't come off. Am I missing something or does it just need more force?
  13. F

    shower bar mixer not producing hot water

    hello all, happy new year! i hope i have posted this in the right section i have a shower bar mixer. the shower runs luke warm. a quick google search showed some ideas on how to adjust it. i tried adjusting it and it didn't change the temp. when i adjusted it the other way to test the cold...
  14. H

    Muslim shower /bidet valve

    Hi. Could somebody recommend a Muslim shower valve that does not leak please? Or one that has a washer that you can replace if it leaks? Some sort of tap will be fine that you can connect the shower pipe to please, ideally in chrome? Many thanks in advance
  15. P

    Shower Tray waste not draining quickly

    Hi, I am trying to clean out my Merlyn Truestone slate shower tray waste unit. I cannot see anyway to remove it to clean underneath. I'm stuck trying to fish out debris which isn't working great. Could anyone please advise if I can remove this or a better way to clean the debris? Thanks
  16. T

    What nut for a thermostatic shower valve?

    I am fitting a thermostatic shower control. The flow knob fitting has a threaded section - 27mm OD - and it would be helpful to get a nut to go on it. Can anyone advise what I need and where to get it please?
  17. ThirtyTwoer

    Noisy, vibrating shower when first turned on.

    I have a problem with noise and vibrations from my shower when i first turn it on. The problem lasts for about 30 seconds after the shower is switched on before it stops. There is a sink nearby, sometimes if we switch that on slowly before turning on the shower then the shower doesn't make a...
  18. M

    New here!- Mixer Shower Issue!

    Hello! Im Martyn Im new here and have joined for some advice on a couple of things. Ive got an issue with a Mira mixer shower that has increasingly become harder to operate. The shower was installed before I moved into the house. Basically what happens is that I turn the shower on so there's...
  19. E

    Issues with thermostatic shower valve

    Hi Guy's, Looking for some advice on an issue I have having with a recently installed thermostatic mixer shower in my ensuite. Everything was working fine for a coupe of months however now the valve has started misbehaving which is resulting in having to turn the temperature valve round further...
  20. realitybytes

    plumber has not fitted water supply pipes level to tiles in shower

    plumber has not fitted water supply pipes level to tiles in shower, one side is approx 5-7 mm out of line, can i fit some sort of extension to resolve?
Back
Top