shower | Page 7

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

shower

  1. Zach054

    Balanced Cold. Electric Shower.

    Good Afternoon. Just wondering if it would be fine to connect an electric shower to the balanced cold supply from an unvented cylinder. Replacing an old Bath mixer tap with the shower hose built into it. Regards
  2. JackyBailey

    What sort of shower waste is required for this tray?

    Hi, Just looking for some advice as seen a few different things online. I'm installing a shower tray in our bathroom but this one has a square inlay to it first. Is this just a standard wet room square plate and then a normal shower trap underneath? I have seen some mcalpine ones but they are...
  3. T

    Sewer smell from shower on hot days

    For about a year, my shower on a third floor is giving an on off gas smell sometimes after a shower and particularly in the morning not long after the sun rises enough to hit our roof. I usually run some water into my p-trap and the smell goes away after a few minutes. There is a tub right...
  4. T

    Sewer gas smell from shower 10am daily.

    For about a year, my shower on a third floor is giving an on off gas smell sometimes after a shower and particularly in the morning not long after the sun rises enough to hit our roof. I usually run some water into my p-trap and the smell goes away after a few minutes. There is a tub right...
  5. C

    Fitting European shower trap to 40mm waste pipe

    Hi Everyone, Can anyone help? I have been searching but with no luck. I am trying to fit a Duravit shower trap which has a 50mm outside diameter euro pipe size outlet. I need to attach it to a 40mm UK size waste pipe and would prefer to solvent weld it as the pipe will be under a tiled...
  6. M

    Oversize Shower Waste

    I have bought a shower tray and it has an extra large hole for the waste trap. Its a cooke and lewis think its an eclips 1400 x 900 tray. The hole is 160mm and has a lip around it for the cap at 200mm. Cant seem to find one in the correct size, hope someone can help.
  7. D

    Electric Shower to Mains

    I currently have an 8.5kw electric shower on a gravity fed system in bathroom which doesn't give great flow when hot turned up but to get a 10mm cable to fuse board would be really difficult at best (I've checked and on 6mm at the minute) I would like a mains shower however changing to unvented...
  8. M

    Shower problems mira

    Hi everyone , got a problem with a cartridge change on a mira shower. It seems only the hot side is working. The temp control only lessens the spray. Put the cartridge in the opposite way and only getting cold Im stumped.
  9. C

    Bar Shower hot on right cold on left

    Hi everyone, I am looking to see if anyone has purchased a bar shower where the hot is incoming from the right and cold coming from the left, really struggling to find a bar shower and riser kit to accommodate this, any advice be much appreciated thanks
  10. tappipe

    shower bath diverter access mystery

    I have a traditional style bath tap with shower attachment via a diverter. The lever no longer moves, and so I managed to unscrew the lever arm and the brass (colonial) piece, exposing the plastic diverter valve. Unfortunately, I am stumped as to how to get access to the diverter valve, as the...
  11. M

    Shower panelling on to plasterboard

    Can you stick shower panelling straight on to plasterboard if I prime say with sbr bond
  12. S

    Cold water tank sediment blocking up the shower head.

    Been getting large amounts of sediment coming through the electric shower. Had two plumbers look at the job who are unsure of how the sediment can be getting through to the electric shower. The electric shower is run off the mains not from the cold water tank. Any ideas on how this has...
  13. M

    SULPHER SMELL IN SHOWER

    Hello We recently had a bathroom referb containing a new walk in shower and have noticed that after the shower has drained away there is a distinct 'eggy' sulpher type smell coming up from the trap. Can anyone point me in the right direction as what this most likely will be and how to best deal...
  14. J

    Advice on slot in replacement for shower unit?

    Hi all, I currently have one of these shower heads fitted in my bathroom : Milan Rectangular Rainfall Shower Head + Water Blade | Victorian Plumbing UK -...
  15. S

    how can I remove a shower mira8 brass cover plate which is scaled up

    Hi, I have just tried to repair a very old Mira 8 shower unit. However, when trying to remove the brass cover plate it's completely scaled up and it won't budge any ideas on how to free it up. We did think about trying to heat up the bass cover plate but we are concerned about the silver outer...
  16. R

    Daryl/Kohler 204292 spline - or good replacement shower.

    My parents are having a great deal of trouble with their Daryl Hydra shower due to this little plastic part being broken. It's the temperature spline - part number 204292, now discontinued. Has anyone had any luck finding anything that works as an alternative/3D printing a part (or by...
  17. M

    shower pump always on

    Hi - I am looking for help regarding new shower pump. -its new -it always stays on when the power is on. It should only switch on when water goes to the shower -its noisy Can anyone advise please? Many thanks Iain
  18. R

    Biava Shower Roller Wheels

    I’m after some replacement roller wheels, not necessarily the whole roller units. The shower unit was made by Biava - pretty old, around 20 years, I should imagine. It doesn't look like parts are easily available as I've looked pretty hard and contacted a number of online sellers. Some of the...
  19. P

    Recommend Exposed Thermostatic Mixer Shower

    Hi All Just looking for some advice on which Exposed Thermostatic Mixer Shower (Bar Shower) would go well with the Shower Pump i'm getting installed. So the pump is the - SALAMANDER PUMPS CT FORCE 30 SU REGENERATIVE SINGLE SHOWER PUMP 3.0BAR from ScrewFix - seems like a decent one for the...
  20. H

    Identifing parts. Objective adjust shower water temperature.

    Hi, I hope to adjust the shower mixer tap temperature by adjusting the physical device regulator, that goes by several names/terms. I have experience of this with sink/basin mixer taps and that was straight forward. I have attached four images and seek assistance to identify what they are. Some...
Back
Top