supply | Page 3

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

supply

Recent contents Top users
  1. M

    Can I run 2 gas boilers off the same gas supply ?

    Hi, Can I run a conventional central-heating-boiler + an instantaneous hot water boiler, off the same gas supply ? Many thanks
    • macrefurbs
    • Thread
    • boilers gas engineer supply
    • Replies: 3
    • Forum: Boilers
  2. A

    getting a wooshing sound in supply pipe after fitting new toilet

    Hi Just removed an old toilet and fitted a new push button cistern one. I had to re-route the supply water pipe over the waste pipe coming out of the back as i had to use a swan neck one to line up with waste hole in floor,and the water pipe didn't fit past waste pipe. I cut the supply pipe...
    • alandk
    • Thread
    • fitting pipe supply toilet
    • Replies: 1
    • Forum: Boilers
  3. omendata

    Flush valve washer needed - nobody seems to supply this size

    Lecica Toilet is quite old (+15 years) I phoned the manufacturer but they sent me a standard washer for the Lecica Cistern flush Valve but it does not fit! Dimensions for the one i require are:- Inside diameter: 75mm. Outside diameter: 57mm.
  4. C

    Supply line diameter

    Hi, My question is about pipe diameters and how it affects available water in the home. I will be replacing the last 35 feet of an existing 1200 foot supply line. The supply line is 1” diameter but it connects to 3/4" pipe going into the home (through the foundation). If I use 35 feet of 1”...
  5. J

    Old 'Town Gas' supply pipe

    Found an old capped off pipe when we removed the kitchen cupboards. Can anyone help advise how to get it removed? Please no guess work I can do enough of that myself, I also know how to Google gas safe engineers. Just wondering if anyone else in has one, has had theirs removed or has removed one...
  6. C

    32mm MDPE supply pipe upgrade for flow?

    Hello all, Currently suffering from poor internal flow rates near the internal 20mm stopcock of 10L/min. Want to upgrade system to either unvented cylinder or large storage combi to feed 5 bedrooms/1 bathroom/1en suite. Affinity water have confirmed supply pipe to the boundary stopcock is...
  7. atorso

    Hisense dishwasher hose won't connect to cold water supply

    We've had a new dishwasher delivered - Hisense HS661C60WUK - and I'm having trouble connecting it to the cold water supply. It just won't screw on all the way. Threads don't look damaged to me. Looks like it's some sort of anti-flood hose (?) which I've never used before. No info about this in...
  8. D

    No Water After turning Supply back On

    Hi There, I work after from home 2 weeks at a time and recently started to turn off the water supply to my flat. But on the two that I have done it on my return from my trip when I turn the water back on I get nothing. Eventually I have to call a emergency plumber who is also mystified as why...
  9. J

    Water softener for mains supply

    Hi all, as the title says, few months ago moved into a house where the water is way harder than expected. We did not expect it because we lived in this area previously and did not have issues with the water back then, even though it's the same mains water supplier. I have done a test strip for...
  10. M

    Dishwasher Cold Water Supply Hose Leaking

    Hi I have a dishwasher cold water supply that is leaking (See Photos). My initial thought was the washer was maybe gone but looks ok. Thought about PTFE tape but everywhere says this shouldn't be needed? Any suggestions? Thanks!
  11. J

    How to convert current mixer valve tap to a cold water supply inlet.

    Any plumbers can advise the best way to convert the current mixer valve tap to cold water supply inlet for electric shower. I have mixer valve tap , I would need to install a new electric shower on shower area wall .Currently is the mixer valve tap. I want to know how to do before I ask the...
  12. A

    Disappointed in hot water supply

    I had a new central heating system installed a year ago but whilst the radiators seem okay I am not happy with the hot water supply. I live in a bungalow so the boiler is on the same level as the radiators. When I turn on the hot water tap I have to run off what seems like at least a gallon of...
  13. K

    Gas pipe supply size question for new boiler

    So we are looking at a new vaillant ecofit pure 418 regular boiler but have a question about the gas pipe size requirements.. At the gas meter the pipe size is 15mm where it then runs under the kitchen floor before exiting at the the other side where the existing boiler is located (old baxi)...
    • Kaputchnik
    • Thread
    • boiler gas engineer new boiler pipe size supply
    • Replies: 6
    • Forum: Boilers
  14. T

    Connector for combined bath overflow and supply

    I need advice on a water inlet pipe for a combined bath overflow and supply. I have uploaded photos. On one side is the attachment i need. In the attached pics one side of the fitting has the connector I need. It's missing from other side. Also how do you remove the fitting on left side? Looks...
  15. S

    My water supply is somehow linked to neighbours water usage and it's affecting my shower (Shared main?)

    Hello Everyone, I hope someone can advise on this problem that is annoying me more and more. I live in a 1900s mid terraced property. My water supply is somehow linked to my neighbours water usage and this is now really annoying me. I can hear the water 'being run' through the water pipes in...
  16. E

    Water supply and drainage for x2 dishwasher / sink

    Question about both water supply pressure and drainage requirements to run x2 dishwashers and kitchen sink. We are currently having a house built and this is the pipe set-up that has been installed. Our understanding is the supply is directly linked to mains supply via a junction point approx...
  17. B

    Can old redundant radiator pipes be used to feed water supply to new gas boiler ?

    Hello all. I'm new to this forum and need some advice about some concerns about a new gas boiler that I have had fitted by a gas safe engineer. My old boiler was a heat only (with a copper tank) and has been replaced by a modern combi boiler. It just used two 22mm pipes to feed to the diverter...
    • Bladerunner
    • Thread
    • boiler gas engineer pipes radiator supply water
    • Replies: 12
    • Forum: Boilers
  18. I

    Advice needed. Converting gravity fed cold supply to mains fed to supply an electric shower?

    I want to put in an electric shower in my downstairs cloakroom which currently has a gravity fed cold supply from the tank in the loft. The shower I am looking to install needs a mains fed cold supply which I could do by disconnecting this pipework from the gravity tank and connecting the cold...
  19. J

    stabilizing the inlet supply pressure on a promax combi

    I have a Potterton Promax combi 28 HE A and it runs a pump when cold taps are turned off and there is a slight change in inlet pressure. I am thinking of putting a pressure reducer or non-return valve and/or an arrestor on the inlet pipe. I tried putting an arrestor on all the cold taps and...
  20. X

    Can I have water supply run to various areas of my manufacturing building without providing a sanitary drain for each water supply location?

    Hello all. I lease an industrial space in the United States, in which I will be doing manufacturing of ceramic, pottery type items. The space is zoned for manufacturing and the applicable plumbing code is: State of Illinois Plumbing Code, 2004 edition and subsequent amendments. I am...
Back
Top