thermal | Page 3

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

thermal

  1. siricosm

    Cylinder for DIY thermal store

    I am looking to install a thermal store to replace my current vented cylinder. I plan to use an external plate exchanger for DHW and heat the store directly from my existing vented boiler. So what I am looking for is a plain stainless steel tank (no internal coils) with a variety of connections...
  2. Scott_D

    Best fixing for thermal blocks

    What are the best fixings for thermal blocks? I have a large designer radiator to fix to lightweight/thermal blocks
  3. D

    Thermal Solar Fill and Flush Tips

    Thermal Solar I have installed the above in my 3 bed simi with22mm pipe and an E and WEst panels into a cylinder with solar h/E and boiler H/e above . Is there and DIY way ( am not a proffesional) of filling and flushing , without buying and expensive fll and flush station please ? I used a...
  4. M

    Thermal imaging camera

    Any views on Thermal imaging cameras please what you have and think is good value for money please. thank you
  5. CorgiDirect

    Testo 868 - thermal imager with App (Save £100 from RRP)

    VIEW HERE Testo 868 - thermal imager with App (Save £100 from RRP)
  6. siricosm

    Suggestion for a thermal store?

    I am moving house and looking to install a thermal store in the new place. I was thinking of an unvented store around 300l, with a single corrugated stainless coil for DHW. Any suggestions on make/model/supplier?
  7. H

    Question re thermal store

    Sorry if this seems a trivia question , but just watched a programme called the chateaux with dick strawbridge . My question is regarding the fact that he put a thermal store right at the top of the building 4 floors when the boiler was in the basement , what is the logic in this as I thought...
  8. R

    Legislation affecting solar thermal

    Given that solar thermal is an uncontrolled heat source, does one have to have any specific qualification to flush and refill a thermal system if the system is heating an open-vented (gravity) hot water system? For clarification, the primary solar water is a sealed system, but the secondary hot...
  9. S

    Serious and pre-existing leak or thermal store error?

    Now sorted... don’t bother reading this stupid long post. Hi, I’ve got a bit of a head scratcher here and wondered what you guys would make of it. I was called by a landlord to do a gas safety check on a property that is now at the latter stages of being sold and the buyers wanted the usual...
  10. S

    Thermal store - very low hot water pressure. Help/ideas

    Very low (trickle) hot water pressure at outlets. Albion mainsflow indirect cylinder. Help and ideas please!
  11. M

    Thermal imaging camera

    I've got a customer who has a leak. I've checked and double checked all the main culprits but no joy as they have karndean flooring throughout I even tried leak sealer (not a big fan of the stuff myself) Its a wooden floor and all the pipes run under it I was wondering if a thermal imaging...
  12. D

    Gravity and vented thermal store.

    Apologies for the unusual question, as I am an interested DIYer. The question is, why do you need a gravity coil, on a thermal store? Surely, you'd get better flow rate from direct connections to the side, as there would be no friction and you could use 35mm or 42mm copper pipe, to a 2 inch...
  13. A

    Thermal imaging camera

    I'm thinking about getting one, does anyone have one? Only want a cheapish one to start with, see how often I need it and if they are any help when I do. If it's worth it then I will invest in a decent one in the future. I haven't needed one before but it might come in handy one day. Any...
  14. D

    Electric Unvented vs Thermal Store/Vented Cylinder with Small Stove

    Hi, We currently have a traditional hot water cylinder with an immersion and connection to a multi-fuel stove with a 10k BTU (3KW?) boiler. The DHW is provided by the immersion over the summer and the stove over the winter. We've got a bath and 2 electric showers, and (honestly) no heating in...
  15. 999

    Thermal imager- What do you use?

    Anyone use a thermal imager in there job? interested to here whats good given the cost of these units
  16. R

    Thermal Store “Boiler-Pump” query

    Hi, I'm a newbie and need some advice please. My 4 bed house has gas central heating with the Regular boiler (BG 330 set to 18Kw output) located in the garage. The boiler is connected directly to the header tank (vented system) and is also connected via a dedicated system pump to a thermal...
  17. I

    Thermal fuse GW ultracom 2 cxi

    Thermal fuse blown in the above boiler. No part number for it as it Comes complete with the hex. The warranty is 5 months out of date, not sure if gw will entertain this one when I call group service tomorrow. Can anyone suggest anything....a heating company is selling them on eBay and state...
  18. C

    Thermal store for Solar PV and oil - 2 immersions?

    Hi, I'm new here and have arrived on this forum as I have a question on the above. I'm talking to a solar PV supplier about a 4kw system with which will come and Eddi controller which can feed 2 immersion heaters. I'm a bit lost when it comes to the cylinders/thermal stores. We currently have...
  19. S

    So many thermal store questions!

    So the plan is this. Currently I have all rooms individually controllable through programmable TRVs allowing me to heat only the rooms that are being used on different profiles during the day and night. So far so good. But I have three main problems with my boiler. 1. there is no boiler...
  20. plumb_know

    thermal imaging camera ??

    Hi everyone, have a old flir pro one thermal imaging camera but does not fit my new phone. can any one recommend a good thermal imaging camera under £500. As i don't use it too often i don't need a top of the range one but i want one that is adequate to find leaks within walls & ceiling...
Back
Top