thermal | Page 5

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

thermal

Recent contents Top users
  1. G

    Thermal store with immersion only

    Had to cap off a manky keston celcius / uv spa combo due to flue leaking in void. Basically looking into alternatives to installing a new combi and having to rip out ceiligs etc to fit new flue and air pipes as current set is fitted within internal compartment. Done a few in the past and are...
  2. A

    Advice Needed - Thermal Store linked to a woodburner and thermodynamic panels

    Hello everyone, Any help that can be offered on this subject will be greatly appreciated, I am not a plumber so I will describe as best I can the situation I am in and essentially the solution that I am after. I am in the final process of finishing the rebuild of our house. Apologies if this...
  3. I

    Thermal store issues??

    Does anybody know what this means it was ascertained that the advanced appliance thermal store was not connected to the output source. I have no idea what the output source would be and am trying to understand this information. Any help would be very much appreciated. Iain.
  4. U

    Thermal store issues

    Does anybody know what this means it was ascertained that the advanced appliance thermal store was not connected to the output source. I have no idea what the output source would be and am trying to understand this information. Any help would be very much appreciated. Iain.
  5. L

    Thermal Store Vs Unvented Cylinder

    Hi Guys, So i'm putting a new heating system in my house and I'm adding a large extension and a loft conversion. The house will eventually have 3 showers, 1 bath and underfloor heating. After posting elsewhere in the forum about suggestions for the best way to heat the house, I was wondering...
  6. J

    Thermal Store runs out of Hot Water too fast.

    OK I've registered and thanks to Chris for spotting that it's a thermal store not an unvented system - I understand more of what all the pipes are for now! To recap and elaborate: My son has just moved into a new flat and this is my first experience of a thermal store! His problem is that the...
    • John949
    • Thread
    • hot water thermal water
    • Replies: 5
    • Forum: Bathroom Advice
  7. C

    Thermal Store. Anyone ran heated towel rails off an UFH manifold?

    Morning, Has anyone ran their heated towel rails of an underfloor manifold? Any problemsIm thinking of running all heating in our house at "low " temperature. so keeping the higher temps at the TS At the end of the day towel rails get too hot to touch off a typical heating system. I just...
  8. T

    Combi vs thermal store?!

    Hi We're planning an extension and are going to replace old oil fired boiler/cylinder. House will become four bedroom, two bathroom, open plan kitchen dining with underfloor heating. We're looking at different heating options and one thing we've heard of is thermal store (rotex) rather than...
  9. U

    Combi vs thermal store - help!

    Hi We're planning an extension and are going to replace old oil fired boiler/cylinder. House will become four bedroom, two bathroom, open plan kitchen dining with underfloor heating. We're looking at different heating options and one thing we've heard of is thermal store (rotex) rather than...
  10. N

    Thermal Stores for domestic hot water.

    For my own general knowledge I would be obliged if someone could answer the following questions regarding thermal stores for domestic hot water. The situation I have in mind is for a 2 bed modern semi. with 1 bathroom and 1 shower room. 1. What minimum capacity thermal store would be required...
  11. D

    Calculation of thermal output???

    I've just had an air to water heat pump installed at my house, and I wanted to get a rough idea of what it's performance is. Can anyone help with a reasonably simple way to calculate the real world COP as a cross-check against the manufacturers BS? I appreciate that COP is a crude measure...
  12. T

    Thermal imaging camera

    Morning lads I keep thinking about a thermal imagine camera. For finding reasons for cold rads, balancing, blockages and seeing everything is running as is should. anyone got one?
  13. V

    Wood burning Rayburn and thermal store advice

    Hello all, any advice would be great on this subject. I've just brought a old Rayburn cooker and wish to use it with a open vented thermal store for dhw and central heating. I've got a small 2 bedroom flat with 3/4 rads and a bath shower and 2 sinks. My question is do I need a pump for the c/h...
  14. plumb_know

    Magnacleanse & flue thermal camera

    Hi everyone, i am an after a magnacleanse solution and flir 1 or tg165 or c2 thermal imaging camera if anyone has therefor sale? thanks
  15. B

    Help - thermal store, mixer-valve replacement and cutting in isolation valves.

    Hi My first post her but I was looking for some advice/to check that my thinking is correct about some work I want to do (I'm a willing novice). Ive got a wood pellet boiler and thermal store in the garage, feeding the central heating and hot water. Hot water storage and header tank in loft...
  16. Z

    Tristor thermal store banging like train!

    Hi, I have a Tristor Telford thermal store in my flat and recently, it's started it make such loud banging noises, it sounds like a car crash pr someone busy banging on the inside! It will make these noises when the system is turned off (as there is no timer) at least 4 or 5 times an hour at...
  17. T

    Ufch off thermal store, flow temperatures too high??!

    Hi guys, any advice for my situation Ov thermal store with ufch tappings but ufch manifold v close to store, Problem is store temp at 72/73'c Manifold has phial type trv and is shutting down v quickly due to flow temperatures Clearly don't want 72 going through ufch (45ish ideally)...
  18. V

    Intergrating stove ,solar thermal and ground source heat pump.

    Have been asked to quote to fit the above in a house . Have done them all individually or linking two out of three but usually with gas or electric back up. the only time have see all three linked (not by me ) the customer was complaining about lack of hot water from their thermal store...
  19. J

    Connection of thermal store Kidderminster area

    Connection of thermal store to solid fuel, solar panel and electric heater. I have Chelmer eco thermal store, design layout and all fittings, underfloor heating pipes and manifold are installed, require plumber for to install and commission rest. Job ready immediately
  20. J

    Thermal stores and private water supplies.

    Hi, we want to install a thermal store to link a Rayburn 355, conventional oil boiler (as backup) and solar. Our main hurdle is all the thermal stores we have found require mains cold water supply for dhw. Whilst there is reasonable pressure from the pumped water supply, it is unlikely to be...
    • Jonsey
    • Thread
    • thermal water
    • Replies: 2
    • Forum: Bathroom Advice
Back
Top