Hello everybody,
I’ll need your help! I’ve no experience on this matter...
I’m about to buy a flat that has underfloor heating. The flat has no gas and the only source of heating, as far as the agent knows, is what looks like to be a big boiler in the picture. There is a thermostat on the wall...
Hello. I’m looking for some advice. We had a 1960’s bungalow in Cornwall with a wooden suspended floor. The old oil builder is 20 years old and so we want to replace it. We were looking at a Air Source Heat Pump with underfloor heating but the more we look at it the more concerned we are that it...
Hi all,
Needing some advice on underfloor heating please. I have an approximately 4 year old Vaillant ecoTec Plus 838 combi boiler which is currently serving 11 radiators around the house which includes 2 towel rails. I've heard that if you want underfloor heating you need to ensure the boiler...
Im refurbing my house and looking into underfloor heating downstairs.
What size boiler would be needed for
30m2 underfloor heating
1 bathroom
7 radiators (5 if ufh installed)
I am currently trying to find out which is the best way to wire up my underfloor heating. I have attached a PDF of what my system is currently like.
I've been advised to install 3x 2-port zone valves so that when the UFH calls for heat it can do so independently of the radiators, which is...
Hi , I have a polypipe underfloor wet system , manifold and with a Salus wireless thermostat. Was working fine last winter for the first time - brought up the temperature slowly over several days using the manifold temperature valve as instructed and left it on 45 degree setting and then...
I fitted a vaillant eco tecplus 630 in July. Underfloor heating now required. It will only come on when the towel rails are calling for heat and zone valve open. I know this is a wiring problem. I didn't wire the boiler a colleague did. Live, neutral earth ok. But I can see only one of the wires...
Hi. What type of thermostat can I use for my underfloor radiant heating? I currently have the type shown in the picture and i do not dind it very accurate. Can i get a digital one?
I am in the process of building a shower in a loft room. The Shower Waste water pipes have to pass beneath the shower tray and will be totally inaccessible once the shower is complete. Which connectors are likely to be the most reliable long term, compression or push fit? I have had solvent...
Having a load of work done at the moment, part of which is to have wet UFH installed, just looking for any thoughts around the best system to use.
There seems to be lots of choice, looking for 3/4 zone system.
Any thoughts greatly appreciated.
I am fitting a secondary return on a system, tank will be in the loft. All the pipework goes up to the loft at the back of a cupboard, I would like the pump to go on the return pipe in here so it is easily accessable for maintenance. My collegue says he thinks it should go to as near to the tank...
Hi all
I have underfloor heating downstairs and radiators, plus two towel radiators upstairs. I have a Heatmiser UH8 and the radiators are connected to the the 5th zone and the towel radiators are connected to the 8th . Now, if I remember rightly from manuals, if you want to hook up a towel...
Hi Guys
Does anybody have any experience in working with one of these:
RTL valve Underfloor heating return temperature limiter thermostat UBG insert 5902693830900 | eBay
or
RTL-MB3 Return Limiter for underfloor heating Valve Temperature Cassette Box | eBay
its basically a TRV that...
Hi,
Thanks for having me. I own a B&B in the far NW of Scotland in the village of Durness on the NC500 route.
I have an Encompass underfloor heating system connected to a Grant oil burner and associated with a Santon Premier Plus unvented hot water system. I keep losing pressure in the hot...
Hi
I currently have a downstairs toilet that drops into a waste pipe that exits through the wall and into an inspection chamber.
I need to extend the underfloor waste pipe to the next room for a new kitchen. As I am digging up the floor and re-doing the bathroom is like to confirm the best...
Hi Guys hope you can help, I have a wet underfloor heating system and have 6 zones, the problem I'm having is one of the zones is getting warm even though the master thermostat/controller is turned off, the pump is not being switched on so is not circulating through the system. I have an 'Ideal...
Hi
I have an installation for CH half way installed (first fixed)
I want to tile all the floors.. and have realised it will be too cold so I thought about laying pipes in the floors instead of having radiators and simply using the flows and returns that are already there for the radiators to...
Hi all
Sorry for long post.
I live in a house that's about 25 years old. There is an old gas fireplace that I having professionally removed (don't worry I'm not touching anything gas related!). It's the type of fire that stands on 4 legs and neatly sits inside the fireplace area.
At the back...
Hi
I have a polypipe multizone underfloor heating system (Gas) that stopped working a few weeks ago.
It had been making some screeching noises and my hunch in that the Grundfos pump has died as the screeching has stopped - along with the heating! I may be wrong of course.
The LED's on the side...
Hey guys
Ive carried out some rough calculations as to how much of my concrete floor I'll have to break out to fit a UFH system and I'm concerned about the amount of work involved and the number of skips I'll need and was wondering if I can reduce the amount of digging I need to do.
I was...