british gas work good or bad

[vauxhall04]

A high percentage of installation work is carried out by contractors, was this the case here or was there a British Gas van on the job? As I said earlier, demand this is put right, British Gas aren't always perfect but I can assure you they will always put the job right. Can you look on the paperwork for a work request number and pm me, I will make sure you are looked after.

hi , this is a pic of the joint that is leaking,and the pipe work in the bed room it looks a mess

 

[vauxhall04]

bg just turn up to fix leak,now put white sealer on it,and it still leaking

 

[northstar]

ouch ! that hurts

 

[vauxhall04]

ive reply to you also put some pic on post 140 and 141

 

[vauxhall04]

control panel at the back of door ,door hitting it when opened

 

[Destroyer2813]

They have cracked the strap on boss by the looks of it need to replace it with new not just keep covering it up with silicone

 

[Barry98]

i would suggest you take doodlebug up on his offer and send him the job number so he can raise concerns on your behalf . Am sure when he sees the pictures he will be disappointed in the quality but he will get someone on it for you.

kind offer doodlebug

 

[vauxhall04]

hi doodlebug the job number is 43918010 work done on the 12,10 and 13,10,2012,thks for your help ,pete

 

[Barry98]

pete what area are you in

 

[hammers4spanner]

Obviously bg needs its own area on this forum wether good or bad

 

[vauxhall04]

hi bod iam in notingham ng8 area,pete

 

[Barry98]

if you have no joy come back and let me know we cover that area and i have a lad in mansfield that will come down. but i would imagine doodlebug will sort you out

 

[dave1]

Fair play to Bod and Doodlebug for there efforts to help. I hope you get it sorted.
I admire Doodlebug for the way he defends his employer but definatly time to move on from this one. (However fun it has been) ;-)

 

[petercj]

on the 11 of last month we had new boiler fitted by british gas all worked well for a month,the fitter put the condensation pipe into the wc waste pipe
and filled it with filler we didnot no this till we emptyed the bath one night and had water leaking down the wall from the joint call british gas back out to do repair it took them 7days to come out to do repair ,they put more filler on the joint and its still leaking,had a new fitter out and he has put a advice notice on the boiler saying the flue is not angled back correctly,but my pipe is still leaking ,any one no what i can do about this british gas dontwant to no,

Make a complaint to British Gas Customer Services giving them 28 days to correct matters - details here:-

HomeCare® Complaints Process - British Gas

If they don't respond to your satisfaction within the 28 days, then put a complaint in to:-

Financial Ombudsman Service

Put the relevant job numbers in the heading of the complaint, and some photographs of the problem.

Include the same for the Ombudsman, plus copies of any other relevant paper work, job sheets, invoice, etc.

 

[Doodlebug]

hi doodlebug if you can let me have a email address i will show you the pics of the poor work ,and yes he was in a bg van and uniform

Relied to your pm mate.

 

[Doodlebug]

hi doodlebug the job number is 43918010 work done on the 12,10 and 13,10,2012,thks for your help ,pete

Thanks mate, I will look into this and get back to you, from looking at the pictures, I have to agree, it's not acceptable and I wouldn't be happy either. I've got a mate who works in Nottingham, I will get the managers name and number from him.

 

[Dotty]

Thank you Doodles. You're in a small minority as far as BG bashing is concerned but I admire that you stick to your guns and are prepared to go do a bit to try and turn a negative into a positive.

A bad report is around the world before a good report has its boots on!

 

[Doodlebug]

hi doodlebug the job number is 43918010 work done on the 12,10 and 13,10,2012,thks for your help ,pete

I've just drawn up a nice email with photos attached, which I will be sending to Chris Jansen if I get no joy with this complaint. I will be happy to send you a copy of the email, just inbox me your email address.

 

[petercj]

Thank you Doodles. You're in a small minority as far as BG bashing is concerned but I admire that you stick to your guns and are prepared to go do a bit to try and turn a negative into a positive.

A bad report is around the world before a good report has its boots on!

Unfortunately, many of Doodle's colleagues fail to show the diligence and concern for customers as he does.

BG have been fined many millions of pounds for failing to deal with customer's complaints properly (and that is a fact anyone can check out via goggle).

Any properly run company will seek to put right their mistakes as soon as possible, but the first step is to admit that a mistake has been made, and for many years BG have just deflected criticism and failed to recognise the validity of customer's complaints.

Having put things right, the next step is to do everything possible to ensure that similar mistakes are not repeated.

Yes, everyone makes mistakes, and the bigger the company, the more mistakes can be made, but the obvious thing to do is to reduce the potential for error as far as possible. The first rung on that ladder is to make sure staff are properly trained and competent, and have the necessary knowledge and skills to do the job.

Having the required knowledge and skills is essential for competent work, BUT, people also need to have the right attitude, i.e. to have some pride in the work they do. Which in my area is a real problem for BG, i.e. some of their blokes just couldn't care less: they make the visit, tick the boxes on the sheet, and they're off to the next job.

BG still has some of the old institutional ways, i.e. staff get everything supplied, and the impression I get is that managers are quite supportive and that there exists a strong sense of esprit de corps between the staff that is shared and supported by management. Which essentially is a good thing imo.

However, to maintain standards and an organisation's reputation, there needs to be some discipline amongst staff that comes to bear when individuals repeatedly show little interest in the job, and regularly produce shoddy work.

It's not unusual these days for managers to say: "oh it's a training issue!"

If someone doesn't have the prerequisite knowledge or skills, then fair enough, provide further training and support - I'm totally in favour of that.

But when come-backs reach a certain point, and when the blokes involved know very well what they should be doing, saying it's: "a training issue" can be just a way of avoiding taking the appropriate action, i.e. it's about management ducking responsibility for maintaining standards.

Which is what I've seen happen with BG in my area.

If the OP puts in a complaint to BG it will be feedback on the local manager's ability to maintain standards, so I hope they take that course of action. In theory, it might save other BG customers from being left with shoddy workmanship.

 

[Guest123]

That photo shows a shocking lack of anything and the installer should be ashamed. After an installation is completed, is it not inspected by a manager or someone relevant who deals with quality control?

At least Doodlebug you are doing the forum justice by going the extra mile to solve someone's problem. For that you are to be commended.

One thing I would say to you is that no matter how many times you praise the company, if there are cut backs resulting in redundancies, you are only one of many and will find yourself on the scrapheap like every one else.

Good on you for helping out though.

 

[Dannypipe]

View attachment 8930hi , this is a pic of the joint that is leaking,and the pipe work in the bed room it looks a mess

Dear me!! That's terrible work.

 

[tamz]

A really bad attempt at fitting a strap on boss. A 1st year apprentice would have done better.
The hole has been drilled too big for the strap on boss. It will need a different make to cover it, possibly a polypipe would do. If not the 4" pipe needs cut out and a new piece inserted which will no doubt be beyond the abilities of a bg fitter since there is a glued boss branch above which makes it harder to do.
Lovely position for a digistat too! Get that moved while they are at it. It is useless fitted in there.

 

[Doodlebug]

A really bad attempt at fitting a strap on boss. A 1st year apprentice would have done better.
The hole has been drilled too big for the strap on boss. It will need a different make to cover it, possibly a polypipe would do. If not the 4" pipe needs cut out and a new piece inserted which will no doubt be beyond the abilities of a bg fitter since there is a glued boss branch above which makes it harder to do.
Lovely position for a digistat too! Get that moved while they are at it. It is useless fitted in there.

I agree mate, there is a lot of thing that need correcting. I've saved the photos and this will be dealt with, trust me.

 

[Doodlebug]

Hi Pete,
Tried to get some info on your installation today. That work request number doesn't seem to be long enough and all our work request numbers begin with "13".
If you can look through the paperwork and inbox me as much info as possible, ie: have you got any engineer names or pay numbers?
It would be even better if you could inbox me your full postal address as I can get job details through that. Sorry to ask so many questions just I am struggling to help with that number you gave me.

 

[Doodlebug]

Hi mate, have you had any job with your complaint? I can't find you with that job number, maybe installation side of business use different numbers to service and repair, if you can give me some more info I will get it sorted for you mate.