HALL of LEGENDS photo gallery. | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss HALL of LEGENDS photo gallery. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

AlexGas

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,845
Let’s show the British people what we can do!

Untitled-2.jpg

Untitled-1.jpg
 
just out of interest, how do you get to the trap on that basin?.

There’s a full access to the trap and ISO’s through the hole. It’s just other side of the tile and 18mm ply. The bottom of the trap is almost in line with the top of the opening.
The panel behind the WC is removable.
 
Last edited:
Very nice job. Must have a tile table saw for them cuts above the worktop.
 
Very nice job. Must have a tile table saw for them cuts above the worktop.

Cheers. The worktop comes to the tile and the bottom edge of the skinny tile is within the thickness of the worktop. I’ve used a wet cutter.

Well… The customer has changed her mind 3 times on what to have under the wash basin and by that time I’ve done the most of the tiling. I didn’t really want to have that grout line so close to the worktop but that’s the way it goes. Also I couldn’t really go any higher with the wash basin, I think the top of the wash basin ended up being 850 ish of the floor. I did point the lot to the customer and she was fine with everything.
 
Beautiful finish, very impressive!

Check the batch numbers on the tile boxes next time though buddy, the vanity unit colours a little different to the wall tiles.

Stay tuned for more crappie jokes! :)

Good job AlexGas.
 
That’s what the customer wanted. It’s fully removable. What’s wrong with that? I take it you are not big on them.
Not having a go Alex, if you can get it off ok, but every one I go to is nailed on or screwed on LOL .
 
Status
Not open for further replies.

Similar plumbing topics

Thanks much appreciated
Replies
7
Views
568
  • Question
Correct aslong as you can tape the other hose...
Replies
3
Views
397
I have a home with an oil boiler in a garage...
Replies
0
Views
647
D
  • Question
Mcalpine sk1 or sk2 is what you need
Replies
1
Views
240
  • Sticky
Please Help! Whats The Latest Gas Textbook for...
Replies
1
Views
2K
Back
Top