HALL of SHAME PHOTo`s

[Rickster123]

The tiling around the alarm sensor is pure class!

 

[Ermintrude]

3 no D1 pipes all over the correct length (just tho just)

 

[plumben]

Think they must of took a week with a hole cutter to do all the joists
Then ran 10mm for 10meters no wonder the fire was under gassed

 

[PhoenixServices]

Think they must of took a week with a hole cutter to do all the joists
Then ran 10mm for 10meters no wonder the fire was under gassed

At least they have made it easy for you to get 15mm in there when you re-pipe.

 

[LPC]

🙂🙂

Not my pic, saw it on the Adey facebook.

 

[Atouchofgas]

Genius, pure bloody genius

 

[plumben]

At least they have made it easy for you to get 15mm in there when you re-pipe.

It was a treat only had to get the blow lamp out

 

[happyflyer]

View attachment 20459

🙂🙂

Not my pic, saw it on the Adey facebook.

How thick are these guys, it never ends, mind you he may have been dead smart and put some sore of blank in there, but how would he do that
he would have to be really clever, did you find out who did it.

 

[Billy Bob Bob]

gone to heap heaven,insulation panel failure

 

[Ermintrude]

Just been serviced , all four flues in operation!

 

[tony_b]

There are some great photos on here and I'm sure there will be plenty more being added so I will keep having a laugh. I mean look. ��

 

[tony_b]

I love some of the photos on here, I'm going to keep my eye on this and keep laughing.

 

[Ermintrude]

Yes the ufh is off the unvented ...... Yes it's powered by a 12kw RI. No there isn't any blending on the UFH. No it don't work. Yes the installer was qualified. No he didn't have a clue. Yes I'm charging £75 p/h to a colleague to fix it. Yes I'm getting money up front. Yes it's hilarious and I can't help but laugh.

 

[Ermintrude]

 

[IDCHAPPY]

That's a horror.

 

[chris watkins]

Yes the ufh is off the unvented Yes the installer was qualified. No he didn't have a clue. Yes it's hilarious and I can't help but laugh.

Qualified in what ???? it defo isn't plumbing (Water Regs or unvented), heating, electrical, lagging, even the woodworking skills aren't great it looks like they even ripped up the bit of flooring right next to the cylinder to use as the back board, you can see the screw holes along the edge of the T&G.

Some have absolutely no shame or then again perhaps they thought it was a good job.

 

[tony_b]

DIY springs to mind.

 

[stevetheplumber]

was there a thermal store there before?

 

[Crinkmeister]

Reg Prescott would have been proud of that!

 

[Ermintrude]

He looked like him. One of our Subbies did it with a diyer / retired woodwork teacher ! Pair of morons. The ufh consisted of 49 loops of 10mm hep. No flow control or blending. Just on and off using boiler pump too...... F f s

 

[Pipes Plumbing]

He looked like him. One of our Subbies did it with a diyer / retired woodwork teacher ! Pair of morons. The ufh consisted of 49 loops of 10mm hep. No flow control or blending. Just on and off using boiler pump too...... F f s

Wow... Just, wow!!!
Still, should be a good earner putting it right... I take it the subbie is no longer a subbie for you?

 

[gasmanrob]

Found this today

 

[Rickster123]

Found this todayView attachment 20671

Stand well back before flushing!

 

[stevetheplumber]

Found this todayView attachment 20671

not as stupid as it looks more reliable than cysten mates and less install cost then ir detectors some where that only gets used a couple of times a week its a great simple way done the same in a storage place and a church annexe

 

[chris watkins]

not as stupid as it looks more reliable than cysten mates and less install cost then ir detectors some where that only gets used a couple of times a week its a great simple way done the same in a storage place and a church annexe

Just what I was thinking steve, and just incase any of you others were wondering if it is legal under the Water Reg's (cos I know how conceded & worried you lot get about such matters) it's fine. :hurray: