HALL of SHAME PHOTo`s

[Millsy 82]

What about the roof truss!!!! or lack of, I hope you lads don't do this if the tank won't fit, Jeez

Either side of the tank there is 2 bits of 2x4 bolted top and bottom so there is plenty of support.

 

[Reg Man]

What's wrong with that, its a double wammy trap, a manufacturer couldn't make one like that if they tried

Now that's what you call a deep sealed trap.

 

[Reg Man]

Cylinder change I did today.

The electrics had been bodged together and the 15mm vent pipe terminated above the tank lid so there was a lovely puddle on top of the tank.

Shocking!

 

[stevetheplumber]

Cylinder change I did today.

The electrics had been bodged together and the 15mm vent pipe terminated above the tank lid so there was a lovely puddle on top of the tank.

the nuts for those terminals will be behind the cylinder ,not that i would ever do that after loosing the nuts

 

[townfanjon]

I know it's not plumbing related but how about this for a bit of a quality workmanship. It's my daughters alleged kitchen, the crack in the plaster kept getting wider , think we know why !!!

 

[rpm]

Amazing brickwork there mate!

 

[julesverne]

It was defo a plumbing contractor for Barratt Homes… Competent or not, experienced or not, GSR or not, crash course GSR, a plumber, an apprentice, one of a rated people or checkatrade, a cowboy, a clown, a monkey or just some geezer with a van and tools.


:smile:
View attachment 20191
No... not this dude!

he's based in bradford see him all the time

 

[Ermintrude]

She's got a lead main and your worried about plaster [emoji87][emoji86][emoji85]

 

[Paulplumb]

Custard wanted me to change kitchen mixer. I said sure but only if I can change the rest of the pipe work too. Flexi hoses joined to flexi hoses! Magic. Custard declined re piping.

 

[woodytheplumber]

I would have said the same paul I think! no chance I would put my name to that you can more or less guarantee once you disturb the tap tails it will be like Niagara falls

 

[solutions]

Exactly when if your flue is leaking condensate is it ok to refix the flue clamp with silicone?

Maybe its around the same time your fitting placky pipe direct to an unvented cylinder.

Also It is a good thing you dont have to spend money on broken tundishes any more just pop a small funnel in the open end of d2.

Got to love rental property and their "maintenance men".

 

[Ermintrude]

Under a job with a mega leak....

What's that u say 1/2 conduit .... Never

 

[kris]

Is that a 4 burner job guy or 5 burner job lol

 

[IDCHAPPY]

Man.... it never fails to amaze me how many shockers are out there

 

[kris]

Looks like a diyer used the old bit they had lying around off an old one doesnt it ,,

 

[Ermintrude]

5 burner. Massive house I mean massive. Upstairs hallway was almost size of my living room. 20m long and 5m wide! His house was heated by 2 33kw COMBI boilers feeding six huge bathrooms. Bath shower sink and bidet in every one ...... 25mm mains. It was done by same pro who linked both boilers together with hep!

 

[Ermintrude]

We quoted for a 33mw combo

 

[IDCHAPPY]

I'm jealous Ermintrude, if you ever need a Scottish stooge let me know big boy

 

[Chalked]

5 burner. Massive house I mean massive. Upstairs hallway was almost size of my living room. 20m long and 5m wide! His house was heated by 2 33kw COMBI boilers feeding six huge bathrooms. Bath shower sink and bidet in every one ...... 25mm mains. It was done by same pro who linked both boilers together with hep!

you have a living room 20m x5m!!

heated by a 600x400mm single arty:

 

[Ermintrude]

It's ufh and its no where near that big. More like 17m by 5m [emoji12]

 

[rpm]

Another I Dee Ten Tee install.

 

[IDCHAPPY]

View attachment 20445

Another I Dee Ten Tee install.

Needs more flexi....

Sheesh, must be DIY surely?

 

[rpm]

Needs more flexi....

Sheesh, must be DIY surely?

Don`t think it was ID. Found it in a shop and was told a local plumber did the whole job which included solvent weld pipe joints without the solvent weld cement.

 

[SimonG]

Can't beat a double trap

 

[happyflyer]

Why didn't he put the 100 mm flex over the waste pipe, only joking!!!!