This is mutleys previous attempts at flues above first floor. Strange how he's been doing cp12 for last 7 years...... Sellotape, paper and some prolly fills on inside .
Ah thanks feller
-
We recommend uHeat for Underfloor Heating Systems, and The Wetroom Store for all things bathrooms and wetrooms. They provide discounts for forum members.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
HALL of SHAME PHOTo`s
- Thread starter Barry98
- Start date
-
- Tags
- None
Ah thanks feller
This is mutleys previous attempts at flues above first floor. Strange how he's been doing cp12 for last 7 years...... Sellotape, paper and some prolly fills on inside .[/
QUOTE]
At least they used the collars on the top 2
H
happyflyer
Went to a leaky toilet just. Take your pick of where the leak was.
3 chances of a leak
B
Billy Bob Bob
![WP_20140902_001[1].jpg](https://plumbers.s3.eu-west-1.amazonaws.com/data/attachments/16/16160-71bff4b01874b9af766ec08b60b1bc8b.jpg?hash=cb_0sBh0ua)
B
Barry98
No MIs clearly state flue to be fitted
B
Barry98
Spoke with fitter from last year not cmc qualified didn't think it needs it with it been a trailer
I
IDCHAPPY
sheesh...
E
Ermintrude
Well. What a lovely day.
Rads won't Heaton first floor and they take a very long time
They have had a "specialist" in. So the called the "special" ones.
Heating load 700m2 open office and production area canteen and reception ...... 12kw? Yeh ok
The header is below top of rads.
Boilers been in for 3 years....
Couldn't work out why the water heater in kitchen and loo kept tripping out, they replaced immersion and stat?
40mm push fit waste nice clips
Fitted unvented
Identified that no inserts used anywhere!
Rads won't Heaton first floor and they take a very long time
They have had a "specialist" in. So the called the "special" ones.
Heating load 700m2 open office and production area canteen and reception ...... 12kw? Yeh ok
The header is below top of rads.
Boilers been in for 3 years....
Couldn't work out why the water heater in kitchen and loo kept tripping out, they replaced immersion and stat?
40mm push fit waste nice clips
Fitted unvented
Identified that no inserts used anywhere!
Last edited by a moderator:
P
Paulplumb
That is absolutely effin mega! I love the pump that just makes me chuckle. Funts lol
I
IDCHAPPY
I've said it before, you get all the stonkers dude :lol:
how the feck do they get paid i cant get paid when its done well
H
happyflyer
I would ban gas hobs, get a induction much more efficient and hyper safe.
Gas Hob
Smells
Goes out in the wind on low flame
more heat on the handle of the pan than the bottom
mess when pan boils over
more moisture in kitchen
hell they have nothing going for them
E
Ermintrude
I remember when gas was new, my aunt in big town had gas oven food always tasted different, we had and still have Rayburn on solid fuel.
E
Ermintrude
You don't have gift of gabb. Some people talk a good job
H
happyflyer
E
Ermintrude
On a holiday let
L
lame plumber
if only they had cored it 6inches to the left 🙂
E
Ermintrude
Look close at the flue or lack of it at wall junction
H
happyflyer
If this is a holiday let should there not be paperwork for it GSR, there may not be the original Benchmark returned to the manufacture
but surely the LL, was that wall ever cored drill, I think it would have fallen apart with the hammer on, the overflow above the flue if that goes off the boiler will be going into condensing mode OK , if this is the outside what's inside like, The Greasy Carpet Brigade.
Looks like part of Hadrians Wall
but surely the LL, was that wall ever cored drill, I think it would have fallen apart with the hammer on, the overflow above the flue if that goes off the boiler will be going into condensing mode OK , if this is the outside what's inside like, The Greasy Carpet Brigade.
Looks like part of Hadrians Wall
Last edited by a moderator:
L
LPC
Got a call from a landlady to go to one of her properties to see about a system where the heating is coming on when they put the water on. She meets me there and takes me straight up to the cylinder cupboard. I said it's probably the 3-port and then I ask where the boiler is?
'What boiler, there isn't one'.
Hmmm. Explain to her that there has to be a boiler otherwise why is there a coil and a 3-port valve and the immersion heater has no plug on the end.....after a few minutes of odd conversation, the tenant overhears and says 'what about the backboiler downstairs'.
I go downstairs, she points at this. I already know what's coming.
Been in use like this since the tenant moved in many years ago. Obv no certificates ever done. Landlady swears a gas engineer did it, but oddly, couldn't remember his name.
'What boiler, there isn't one'.
Hmmm. Explain to her that there has to be a boiler otherwise why is there a coil and a 3-port valve and the immersion heater has no plug on the end.....after a few minutes of odd conversation, the tenant overhears and says 'what about the backboiler downstairs'.
I go downstairs, she points at this. I already know what's coming.
Been in use like this since the tenant moved in many years ago. Obv no certificates ever done. Landlady swears a gas engineer did it, but oddly, couldn't remember his name.
P
Paulplumb
What boiler? lol
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.