magnacleanse | Plumbing Jobs | The Job-board | Page 4 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

  • Thread starter gasfit247
  • Start date
  • Replies 85
  • Views 12K

Discuss magnacleanse in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Bearing in mind what Sam said in post 73, would you mind having a look in your unopened one Killy Bing, and seeing if there is one in there?

Ray
 
Hold fire, will see if i can make adey cry and send me one out for free first.

i managed to get 50 seal kits out of them easy enough....

they do seem very keen to give away freebies with a bit of leaning on
 
Bearing in mind what Sam said in post 73, would you mind having a look in your unopened one Killy Bing, and seeing if there is one in there?

Ray

Will go open it up.

haha riley, i tend to be able to get discounts or freebies out of pretty much everyone.
phex show i walked away with two bags and a rucksack full
 
Will go open it up.

haha riley, i tend to be able to get discounts or freebies out of pretty much everyone.
phex show i walked away with two bags and a rucksack full

loving your work when I go to shows I grab all the freebies going then get home n look at it and think wtf bin 3/4 as it's tat :wink:
 
Was there a demo jar in your's Matt, or did you blag yours from Adey?
 
Mine was bought in October, Ray. November if Adey are reading this as I had to bend the truth slightly to get my free Pro 2 and chemical pack.
 
What does the seal kit include? Does it fit the pro 2 and original?

The large o ring for the screw down body, pretty sure its good for both.
and a small o ring for the bleed i think, will have a look.

ring up, say you have fitted x amount and some are leaking.
 
Status
Not open for further replies.

Similar plumbing topics

Remove radiators prior to flushing and connect...
Replies
2
Views
1K
Most flush machines stipulate a max temp of...
Replies
2
Views
686
Thanks for your reply. The noise is right at...
Replies
2
Views
1K
The pump/motor are way, way more powerful with...
Replies
18
Views
4K
  • Question
Hi Thanks for posting - has anyone got any...
Replies
1
Views
2K
Back
Top