My first cylinder install with boiler | Boilers | Page 3 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss My first cylinder install with boiler in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Wasn't too far off stabbing the parts at 4K :D
 
Just under 150 a day for London jay is too cheap
Day rate is £250 for plumbing, £350 for gas.. I’ll just have to put this one down to experience and move on!! If I can...:eek:
 
Day rate is £250 for plumbing, £350 for gas.. I’ll just have to put this one down to experience and move on!! If I can...:eek:

Anything like you've just done with both bits (plumbing and gas ) half / middle your charges

So your day rate for a job like you've just done £300 etc
 
Anything like you've just done with both bits (plumbing and gas ) half / middle your charges

So your day rate for a job like you've just done £300 etc
I think I’ll just have to say it took longer than expected and charge £300 a day, don’t want to completely lose out here!!
 
I think I’ll just have to say it took longer than expected and charge £300 a day, don’t want to completely lose out here!!

Did you quote for wiring it up ?
 
Did you quote for wiring it up ?
Lol no.. I just thought that’s a part of it all. I just looked at my original quote and I said I based my quote on 6 days work which may extend and materials may also increase so that’s good!! Thank %#^* I said that!! Phew how I thought I’d get that done in 6 days is beyond me!!!
 
Would add a bit on that to even it out etc

Could loose £600 on electrics

And pays to have a good set of t and c

Also your lab would of been right if it was 6 days just over 300 a day
 
Would add a bit on that to even it out etc

Could loose £600 on electrics

And pays to have a good set of t and c
Yeah I need to sort that out ASAP!! You charge £600 to wire it up?? No wonder I’m skint lol
 
Yeah I need to sort that out ASAP!! You charge £600 to wire it up?? No wonder I’m skint lol

On a full system yes day to day and a bit and materials
 
Want me to break one of our quotes down for you ?
 
Cheers Shaun, much appreciated!! If I’m ever up in Wales I’ll shout you a few beers ;)

:D one rule what happens in wales stays in wales (applys to sheep riding also) :D
 
Out of curiosity, roughly what would you guys charge (labour only) to fit a system like this.. all new heating and cold/hot water pipework throughout, 10 rads, boiler/cylinder and all controls and new gas run, about 16 meters.
Is it empty?
 
Repipe hot and cold to all bathrooms, ensuite and WC?

Edit due to spellings
Have fed hot/cold and heating pipework through to bathroom which I’m also doing separately. Loft bathroom already done by a loft firm, I just had to connect it by cylinder.
 
To be honest mate. I know blokes that would charge 2.5k and 4.5k. I like to do a good job at a fair price. Bound to get more work out of it if you stay reasonable.
Yeah I guess.. don’t wanna undersell myself though.. there’s reasonable and then there’s cheap! I’d rather be slightly expensive than slightly cheap, people’s perception of cheap isn’t positive!
 
Status
Not open for further replies.

Similar plumbing topics

I use a bit of foam to hold it in place, then...
Replies
41
Views
5K
No they just do the address, thank goodness...
Replies
8
Views
1K
I was unable to create a second account for...
Replies
9
Views
5K
Deleted member 126113
D
Thanks. It dosen't sound as if you need to do...
Replies
5
Views
3K
Back
Top