new installation | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss new installation in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
35
hi all 1st posting here
long posting so stick with me pls
replacing my thorn apollo to a wb 34cdi. going to be connected to 5 double rads and 1 towl rad, yes over powered because its going to feed a mixer shower, 14.4 lpm,
had a few companys in for prices starting off with bg 3800 inc wb contr(full paperworks will be supplied reg with local council gas safe and wb), informed me to get my own heating unit so no markup price also my own new rads etc, he has 000s of positive feedbacks going back a few years now and working for himself
now the rads that on the old sys are years old (20+) and sys full of gunge
the new location for new boiler is going to be where the hot water tank is atm (direct above boiler)
ive asked the fitter if there is going to be a powerflush and his reply was yeah (not convincing) hot & cold , if that makes sense??
im going to be at work then this is getting installed the last thing im wanting is not knowing if this has been done or not, ive also supplied my own f1 & f3
last thing i went for wicks rads as i see that they are quinns rebranded if thats correct , any advice any1
 
Last edited:
Bg ?? British Gas if yes he's fitting it on the side
 
How much is he charging you? And is he supplying pipe and fittings?
 
Too cheap I'm sorry conversion to combi min would be about 1k with flush
 
its going to be fitted to a outside wall so its horizontal flue, ive read his background and has a list long with his qualifications , also approved by baxi and valliant, should i be worried
 
Did he explain about possible leaks on the system due to going from gravity system to pressurised
 
, hes the heating engineer i leave that to him,im wanting this done correctly as i will prob be living in this house for a longtime to come

But should if explained the old Pipework might leak but at that price sorry to say too cheap I think
 
Far too cheap. Sounds alarm bells to me. I would be interested to see photos of the installation and the benchmark book.
 
Good luck with it!!

And we'll see you on here in a while, asking if someone will sign it for off!
 
as i said its going to be signed off with gas safe and local council and with wb, i do have second thoughts about using this guy becuase of the price, but being approved by baxi & vallent i was thinking i cant go wrong here along with 000s positive reviews, im going to be taking a day off work (2nd day of fitting) which is i believe thats when the powerflush will be done, i will if i can post pictures on here of the installation and let you guys see the end result
 
You can check him being gas safe registered online (think it shows a photo as well)
 
New posts
Status
Not open for further replies.

Similar plumbing topics

Hi Guys Im doing a new build near Brecon...
Replies
0
Views
1K
Replies
12
Views
2K
The burner output might be the problem, I’m...
2
Replies
26
Views
4K
My advice for what it's worth is it not the...
Replies
12
Views
1K
  • Locked
You got it mate should save a few quid over...
Replies
10
Views
2K
Back
Top