S
stevep
I have a heatline c24 with no modulation on the gas valve.
Gas inlet reads 20mbar and min/max pressure setting will not adjust and are static at 4mbar.
Main/modulating coils have correct signal voltages and resistance of both coils is correct.
Can anyone advise if the gas valve is at fault.
Cheers
Gas inlet reads 20mbar and min/max pressure setting will not adjust and are static at 4mbar.
Main/modulating coils have correct signal voltages and resistance of both coils is correct.
Can anyone advise if the gas valve is at fault.
Cheers