Over charging. | Plumbing Jobs | The Job-board | Page 3 | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter hunterseye
  • Start date
  • Replies 115
  • Views 18K

Discuss Over charging. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Desrob you obviously dont condone anyone trying to better themselves and try to provide for a young family.

I wouldn't like to be starting out in this game now to do that.

Iv studied two years for my 6129 qulification spend well over £1500 on tools and now looking into buying a van am I going to stop what I enjoy doing just because I haven't got an NVQ? No. Its so hard to gain an apprenticeship at the moment but I enjoy plumbing so that isn't going to stop me :).

I've studied for 35 years to gain just about every trade related qualification out there and others, spent well over 50k on tools, spent over 100k on vans and i stopped enjoying it years ago. I don't have an NVQ either :smile:

we all have to mature like a fine wine at some point lol.

It is not quite like fine wine as you'll find out in about 20 years when the pain kicks in.
 
What do you mean? You will need an NVQ? To practise plumbing?

You dont need an NVQ to do plumbing.Your city and guilds is plenty enough,Imo this NVQ is a money making scheme.College wanted my 1500 pound to sit in the class room and a further 1500 to do NVQ that would include all on site visits.I no a few people that are doing NVQs and dont actually have a placement
 
You only require nvq on new builds i think so you need both parts to be "industry recognised". I may be wrong.

Your are wrong on both accounts,we have had this arguement in college with the tutors many a time.NVQ is just proof of competence,City and Guilds is recognised by employers all over the world,this has always been a grey area in plumbing,like whos quals is better etc.Its a complete load of Shi*e.Every one is doing the same thing at the end of the day.Even if you only have tec cert you can still do Gas and water regs.
 
Last edited by a moderator:
You only require nvq on new builds i think so you need both parts to be "industry recognised". I may be wrong.

I dont want to sound rude mate but i would do a bit more digging.You can do alot more than you think
 
I fully agree everyone has to learn, some are destined to be tradesmen other are destined to be businessmen, it's worth bearing in mind that a Ltd. company does not need any qualifications in fact the directors of some of the biggest service providers in this industry are accountants.

I suggest that young men starting out would do a lot worse than employing a retired plumber, kind of mentor / instructor, the combination of the wise old head and the young energetic tradesman could be winning combination.

A couple of things to note, there is no such thing as a silly question only the one you didn't ask, as for qualifications we graduate from the college of life in our last moments on this earth so never be afraid to continue learning, finally remember any small job you do includes traveling to and from the job don't forget to charge that out as well as the hour you spend on the job.

Have fun.

I like this and this is a very mature answer.I would do the same and hired a good experienced plumber if i was busy.We should be here to help each other out
 
I've studied for 35 years to gain just about every trade related qualification out there and others, spent well over 50k on tools, spent over 100k on vans and i stopped enjoying it years ago.

Out of interest Tamz how long into the 35 years did you enjoy it for? It must have been a while unless you've been willingly doing a job you don't like for decades.
 
You dont need an NVQ to do plumbing.Your city and guilds is plenty enough,Imo this NVQ is a money making scheme.College wanted my 1500 pound to sit in the class room and a further 1500 to do NVQ that would include all on site visits.I no a few people that are doing NVQs and dont actually have a placement

The NVQ system was introduced so that people could get on the job training and qualifications using workplace assessors.

C&Gs being done in college - traditionally being combined with full-time work, i.e. 1 day in college & 4 days at work.

Many FE colleges got into NVQ training, and they were misusing the qualification because there was no real on the job work involved, and they were told they had to stop abusing the system.

The politics of the NVQ system was about reducing the State's responsibility for training people, and turning it over to private enterprise.

What the politicians grossly underestimated was that it takes time to train people, and that training requires not only the necessary craft skills, but also skills in training, i.e. the ability to communicate relevant information, and the ability to communicate and relate at a level that enables the trainee to feedback on what they have learned and where the grey areas are. Telling people where they've gone wrong is one thing, being able to analyse why they've got it wrong, and feedback in a constructive way is another.

A good tradesman needs to know what he needs to know, and the skills to apply such knowledge to be good at his job. But if you ask him why he does what he does, and to explain what he does in great detail, he may not always know, i.e. he may say that he does it that way because that's how he was trained. Also, being good at what you do doesn't necessarily mean that you have the patients or the inclination to pass such skills on.

Turning over training to the private sector has generally been a failure, even during the more prosperous years.

The tried and tested model is to put people into jobs where they get input from FE colleges combined with support and some supervision when on the job.

We live in a country where lots of people don't have homes, and we have lots of people who would jump at the chance of learning construction skills, plus we have an increasing number of people who have construction skills but lack work, so the obvious thing is to start building homes for the people who need them using the people who have the skills, and those that want to learn, to get the system going again.

However, because the college boys who are running this country have been told by their Thatcherite mentors that such a plan is ideologically unsound, it doesn't happen!
 
The NVQ system was introduced so that people could get on the job training and qualifications using workplace assessors.

C&Gs being done in college - traditionally being combined with full-time work, i.e. 1 day in college & 4 days at work.

Many FE colleges got into NVQ training, and they were misusing the qualification because there was no real on the job work involved, and they were told they had to stop abusing the system.

The politics of the NVQ system was about reducing the State's responsibility for training people, and turning it over to private enterprise.

What the politicians grossly underestimated was that it takes time to train people, and that training requires not only the necessary craft skills, but also skills in training, i.e. the ability to communicate relevant information, and the ability to communicate and relate at a level that enables the trainee to feedback on what they have learned and where the grey areas are. Telling people where they've gone wrong is one thing, being able to analyse why they've got it wrong, and feedback in a constructive way is another.

A good tradesman needs to know what he needs to know, and the skills to apply such knowledge to be good at his job. But if you ask him why he does what he does, and to explain what he does in great detail, he may not always know, i.e. he may say that he does it that way because that's how he was trained. Also, being good at what you do doesn't necessarily mean that you have the patients or the inclination to pass such skills on.

Turning over training to the private sector has generally been a failure, even during the more prosperous years.

The tried and tested model is to put people into jobs where they get input from FE colleges combined with support and some supervision when on the job.

We live in a country where lots of people don't have homes, and we have lots of people who would jump at the chance of learning construction skills, plus we have an increasing number of people who have construction skills but lack work, so the obvious thing is to start building homes for the people who need them using the people who have the skills, and those that want to learn, to get the system going again.

However, because the college boys who are running this country have been told by their Thatcherite mentors that such a plan is ideologically unsound, it doesn't happen!

I agree with parts of this,the College decides what qual is gonna be and can change what and when they feel like it as my self and other people have found out since last year.They are stopping the scheme where you will just do the class room training and it will be where you have to be on site.
 
I thought there are currently NO legisation in plumbing apart from the obvious i.e Gas safe OFTEC and unvented?

There is currently no legislation which you are correct,this is gonna change though from the goverments eyes anyone who isnt qualified as a plumber can just walk up to a customers house do what ever work and could contaminate the water supply.They are out to close the loop hole at some point,when i dont no.The tutors at college are gonna keep us updated on this.Its changing every where,as silly as it sounds years ago anyone could be a hair dresser untill peoples heads was getting burnt through chemicals put on there hair,when the hair dresser didnt do a check first to see if they was allergic to it.My missus is at college now and the missus has to go on courses and get the right papers just to do everyones hair.I think the Goverment are just tightening the belts every where now to be honest
 
But there are time served plumbers out there without NVQ's this can't happen can it?
 
I wouldn't like to be starting out in this game now to do that.



I've studied for 35 years to gain just about every trade related qualification out there and others, spent well over 50k on tools, spent over 100k on vans and i stopped enjoying it years ago. I don't have an NVQ either :smile:



It is not quite like fine wine as you'll find out in about 20 years when the pain kicks in.

Tamz, I think everybody on the forum would agree by your posts and advice that your wealth of knowledge is enviable,invaluable and unbeatable.That said your experiences of the trade seem to suggest you are somewhat disalusioned. There is still plenty of work to be had out there you just have to take take the job by the balls and have some confidence, sure you will make mistakes but that's all part of the learning curve.Its not repeating them that counts.When your sat at home with your pipe and slippers reaping the rewards of your labour its us new boys who will be the next generation who are taking their business forward. I base this on my own experience, my business is going from strength to strength with more and more repeat business coming in and im sure im not the only one.
Bob.
 
what is happening with your course rick ?

Its still going ahead as planned Northstar.we have to sign upto our level 3 early or we will miss out.Any wanting to do it from september this year for level 2 will need a placement so the college say,
 
I agree with parts of this,the College decides what qual is gonna be and can change what and when they feel like it as my self and other people have found out since last year.They are stopping the scheme where you will just do the class room training and it will be where you have to be on site.

All FE colleges have been given a deadline for ending the practice of 100% college based NVQ training, which covers all training sectors, e.g. plumbing, catering, etc, etc.

The colleges will be moving towards Diploma qualifications, C&G, etc.

The Government have effectively cut funding to FE colleges - they say they have made £xxxxx.000's available for apprenticeships, but as many businesses are struggling to keep the staff on they have at the moment, the Government's pledging of cash is pretty safe, i.e. it won't be taken up.

There needs to be coordination and long-term planning of training, and of course the business environment at national level - most politicians haven't been interested in skills training, the focus having been on University education, which they've now managed to make a mess of.

Most of the dimwits in Westminster think in terms of: blue collar - white collar, i.e working with your head, or your hands, they don't get the idea that both increasingly play a part in today's world where things are constantly changing and becoming more technical.

Vince Cable occasionally says something sensible, but then Nick calls him in to give him a metaphorical slap for talking out of turn.

This country would be best served if the Tories hived off business development and related growth to the LD,s, thus giving Vince Cable a shot at getting things going again. The idea that the Tories are good at business is old hat - maybe in the days of Ted Heath there were people in his cabinet that were self-made men, but that's not the case these days. Silver spoon brigade now! Same goes for the Labour Party.
 
All FE colleges have been given a deadline for ending the practice of 100% college based NVQ training, which covers all training sectors, e.g. plumbing, catering, etc, etc.

The colleges will be moving towards Diploma qualifications, C&G, etc.

The Government have effectively cut funding to FE colleges - they say they have made £xxxxx.000's available for apprenticeships, but as many businesses are struggling to keep the staff on they have at the moment, the Government's pledging of cash is pretty safe, i.e. it won't be taken up.

There needs to be coordination and long-term planning of training, and of course the business environment at national level - most politicians haven't been interested in skills training, the focus having been on University education, which they've now managed to make a mess of.

Most of the dimwits in Westminster think in terms of: blue collar - white collar, i.e working with your head, or your hands, they don't get the idea that both increasingly play a part in today's world where things are constantly changing and becoming more technical.

Vince Cable occasionally says something sensible, but then Nick calls him in to give him a metaphorical slap for talking out of turn.

This country would be best served if the Tories hived off business development and related growth to the LD,s, thus giving Vince Cable a shot at getting things going again. The idea that the Tories are good at business is old hat - maybe in the days of Ted Heath there were people in his cabinet that were self-made men, but that's not the case these days. Silver spoon brigade now! Same goes for the Labour Party.

I got away with not paying for my level 2 but got to pay for my level 3 as funding has already been cut.Diploma is already in force with City and Guilds anyway. AQF is also a new Qual but also a bridge over from say 6129 to 6189 or what ever it is.The funny thing is the college dont no alot about the bridge over yet with it being new lol
 
We've not even been offered lev 3 Rick. It's a case of thanks for your money,there's the door oh and sorry for ripping you off over 60 hours on the course coz we couldn't manage to keep hold of not one or two but 5 lecturers. And people wonder why my knowloedge is limited. So you find yourself asking, what next? The only conclusion i came to was roll my sleeves up and try.
 
Personally speaking, I learnt a lot on my apprenticeship and tbh I wouldn't be half as good as I am if I'd not gained that experience. College taught me nothing about the practicalities of doing the job. I'm not saying you need an NVQ to get on, but walking out of college and setting up on your own does not make you competent in my eyes.

Sent from my iPad using Tapatalk HD
 
We've not even been offered lev 3 Rick. It's a case of thanks for your money,there's the door oh and sorry for ripping you off over 60 hours on the course coz we couldn't manage to keep hold of not one or two but 5 lecturers. And people wonder why my knowloedge is limited. So you find yourself asking, what next? The only conclusion i came to was roll my sleeves up and try.

You will be able to do the new Qual mate its a bridge over.Level 3 is surposed to be hard more indepth with heating,bit of gas and all the engergy stuff.In level 2 we are just scratching the surface with heating
 
I got away with not paying for my level 2 but got to pay for my level 3 as funding has already been cut.Diploma is already in force with City and Guilds anyway. AQF is also a new Qual but also a bridge over from say 6129 to 6189 or what ever it is.The funny thing is the college dont no alot about the bridge over yet with it being new lol

Diplomas have been around for the past 5 years or so - the colleges were put on notice of the issues around NVQ some years back too, having been given time to adjust.

To be fair to the colleges, they don't really know what to allow for. The Government plans suggested that there would be a demand for one-day-a week courses based on apprenticeships, but then the scale talked about was unrealistic, and as the recession has bitten harder and harder, so there is less chance of creating college courses that have work placements.

The abolition of the Adult Learning Grant was given hardly any coverage by the media. The media colluded with politicians by focusing on EMA, which they justified the scrapping of by saying that kids didn't need paying to stay on at school.
 
Status
Not open for further replies.

Similar plumbing topics

I'll do a landlord certificate without service...
Replies
7
Views
2K
  • Locked
  • Question
Anyone know of a repair service for Axpert...
Replies
0
Views
364
V
  • Question
Firstly I'd counter their demand by asking for...
Replies
3
Views
649
N
Thank you all. The wording was ambiguous in...
Replies
6
Views
896
Northgan
N
Back
Top