pump over run? | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss pump over run? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
C

Chris H

Replaced a burnt out heating pump, replaced wiring exactly as was on original. Checked it later some 45 minutes after heating clicked off and the pump is still running with programmer not calling for anything. Could this be anything on the boiler (baxi solo 3 pfl). Owner thinks possibly original pump was running 24/7 for sometime as the noise use to keep him awake. Any ideas?
 
the boiler does require over run,its not wired right get spark out,overrun cnnections are on boiler elecy terminals
 
Status
Not open for further replies.

Similar plumbing topics

it already IS (and always has been) a W-plan...
2 3 4
Replies
77
Views
3K
Yep, that's what I meant (as per attached...
Replies
7
Views
1K
    • Like
Alpha 2/3 manual. Shows variant with air...
Replies
8
Views
1K
Replies
14
Views
1K
Back
Top