O
Old Account
hi lads,
I just went today to a customer which wants me to convert his back boiler and hot water cylinder to a sealed system. He wants me to install a Vaillant 938 with 11 rads ( most of them are large 1400x600 ) and future 2 bathrooms.
He is worried that the pressure will drop significantly but I assured him due to my experience and based on Vaillant that it won’t happen and that the 938 will be fine. He is upgrading the mains water supply to 32 mdpe.
Will this type of boiler enough for future zoning? He is planning on splitting the zones in to 3 zones which are ufh downstairs, upstairs rads, downstairs rads.
However, at the moment his last radiator in the bathroom upstairs is only working half way ( vertical radiator). The difference between the F&E tank and the vertical Rad is about 10-20cm at max. Is that the problem why it doesn’t work in full?
Thank you for your help
I just went today to a customer which wants me to convert his back boiler and hot water cylinder to a sealed system. He wants me to install a Vaillant 938 with 11 rads ( most of them are large 1400x600 ) and future 2 bathrooms.
He is worried that the pressure will drop significantly but I assured him due to my experience and based on Vaillant that it won’t happen and that the 938 will be fine. He is upgrading the mains water supply to 32 mdpe.
Will this type of boiler enough for future zoning? He is planning on splitting the zones in to 3 zones which are ufh downstairs, upstairs rads, downstairs rads.
However, at the moment his last radiator in the bathroom upstairs is only working half way ( vertical radiator). The difference between the F&E tank and the vertical Rad is about 10-20cm at max. Is that the problem why it doesn’t work in full?
Thank you for your help