Running a new gas pipe from meter to kitchen advice

[choco]

NICIEC five day course.
Yes, got some notes and printouts and stuff. Just need to get those manuals on board so it's there in black and white.
Had some good advice on the Corgi and Viper books. Just need to make up my mind which one to go for. I see that Viper are still selling the 'Spring' edition. Maybe it's worth waiting for the Summer one if it's imminent.

 

[tamz]

now i need to google

im actually none the wiser

exaggeration or overstatement. You must have been off ill the day that word was taught :smile:

 

[tamz]

I see that Viper are still selling the 'Spring' edition. Maybe it's worth waiting for the Summer one if it's imminent.

These books are not like magazines. You don't get seasonal editions.
Spend your money and buy a set. Viper, Corgi or others. It may seem expensive but it may be the best 100 you ever spend

 

[stevetheplumber]

can you realy qualify as a competent trades man and join corgi after a five day course please tell me its not true

 

[Bernie2]

I often wonder if we are not getting a bit paranoid about giving away advice?
Anybody Googling virtually any of the questions asked on the forum can find in depth information on many web sites that would enable them to do virtually any kind of gas/plumbing/heating job. We look a load of old silly duffers wanting to keep secrets to ourselves, that anybody can find the answers to themselves if they want. So refusing to help people is giving out a bad image on what is ostensibly a help forum.
A bit like a green grocer not telling you if the fruit on sale is bad or not in case you do not buy it. Come on guys what would you have done if somebody had not told you about the game? Tell them but warn them about regulations and DIY efforts is the name of the game.

 

[Dannypipe]

Five day course. Glad you don't service my boiler.

 

[mcniven]

I disagree with you Bernie, I think we should discourage it, we learned because we were apprentices and served 4 years learning and being assessed. It scares me to think someone like my old man could come on here - and learn how to move a gas pipe, change a gas valve etc. I think if we discourage it and other forums follow suit it will drill in more to joe public NOT to touch gas.

 

[Simon F]

NICIEC five day course.

the gas NVQ that I did was 2 years, 1 day a week for I think 34 weeks each year.
at the same time building up the portfolio. (That was after doing a 2 year plumbing course)

....:rolleyes2:.... what are you actually qualified for after 5 days?

 

[Dannypipe]

the gas NVQ that I did was 2 years, 1 day a week for I think 34 weeks each year.
at the same time building up the portfolio. (That was after doing a 2 year plumbing course)

....:rolleyes2:.... what are you actually qualified for after 5 days?

It seems that getting gas safe qualified is more about how much money you're willing to give the training centre and less about how much you actually know about gas work.

This is scary and needs to be addressed.

 

[mcniven]

Kirk will know the answer to this

Is the engineers name not tied in with the training centre for the first few years?

 

[GQuigley67]

5 day course bloody hell...

 

[mcniven]

thats the advance course gerry

 

[choco]

I think this collective bottom lip quivering is down to a misunderstanding.
My domestic assessments exams was over five days, not my entire gas training. I passed every one of the papers and practical assignments but have not revised since Feb.
I did a full trade apprenticeship and qualified to C&G Advanced Craft over 20 years ago, and was Corgi-registered in the 90s.
I spent a period of time out of the trade until recently, and have been inching my way back in since last year. I am now GS-registered but am still getting to grips with all the new legislation.
I appreciate the constructive advice some of you have offered, but can the rest of you headshakers stick your dummies back in? Yeah? 'Triffic!

 

[glenno1]

You are maybe legit choco, but many arnt and that is why you are hearing from a lot of unhappy engineers

 

[stevetheplumber]

even in the 80s and 90s we were pipe sizing and you must have covered it in the recent assesments
yes you can upsize the pipework to deliver more fuel to an appliance gas preasure is lost when the gas touches the walls of the pipework so larger pipes mean less friction and less preasure loss

 

[AWheating]

I think this collective bottom lip quivering is down to a misunderstanding.
My domestic assessments exams was over five days, not my entire gas training. I passed every one of the papers and practical assignments but have not revised since Feb.
I did a full trade apprenticeship and qualified to C&G Advanced Craft over 20 years ago, and was Corgi-registered in the 90s.
I spent a period of time out of the trade until recently, and have been inching my way back in since last year. I am now GS-registered but am still getting to grips with all the new legislation.
I appreciate the constructive advice some of you have offered, but can the rest of you headshakers stick your dummies back in? Yeah? 'Triffic!

it takes time to learn the trade, i can honestly say every time i go back to resit the acs i forget alot of it very quickly for around 5 years anyway . I think if you had given alittle more information in a couple of posts you would have got les questioning replys. The good thing is your asking for advise which shows you want to do things right.

the puzzling thing is why you wanted to come back to the trade? you can earn more money with a paint brush..... i bet you longed for the smell of boss white

 

[kirkgas]

exaggeration or overstatement. You must have been off ill the day that word was taught :smile:

i must have been off lots of days then, cause theres hunners of stuff i dont know

 

[kirkgas]

Kirk will know the answer to this

Is the engineers name not tied in with the training centre for the first few years?

technically yes in that if there is an incident by anyone who is gas competant (this will be in doubt as they are being investigated because of an incident) so it is perfectly acceptable for the authorities to examine every avenue of their background which includes their company ethos towards work (ie completing 15 services a day could be seen to be bad management allowing the increased risk of a mistake) or if there is no issue with the company they can look at the assessment process, but TBH in CYA land which is well covered by training and certification bodies it would be very unlikely that a training centre would be blamed for his incompetance as long as they followed the guidelines handed to them by their certification body which has been ratified by HSE, however if mistakes were found in the paperwork meaning he hadnt actually carried out certain tests they could be blamed, which is why i assess you, someone does an Internal verification of the paperwork then it is sent to the cert body where it gets externally verified so there are 3 lines of defence to pick up probs, and one of the reasons i cant print and issue gas certs on the day you pass, they dont care about the delay as its a better safety net for them and you have a 6 month window to come in before your ticket runs out

 

[topdog]

WARNING..........Not GAS SAFE Reg........
Doing Work Portfolio at the moment,

If you give me the KW of the 2 appliances, AND Distances from meter also,Ts & bends required,
I will work it out for you.......and give you the pressure loss and pipe size to use.

Remember I'am a trainee Gas Engineer.

But I can work it out for you, its no problem, if you still need help to work it out.
and I can post it on here so other Engineers can see if I'am correct.
Just trying to help.

Remember Maximum pressure absorption of 1mbar from gas meter outlet to all appliance inlet connections, assuming the working
pressure at the gas meter outlet is 21mbar this will ensure that the appliances are supplied with their design pressure of 20 mbar.
It must be stressed that this is working pressure NOT standing pressure.
Remember to add 0.5 metre to the length of pipework for EVERY Elbow or T and 0.3 metres for a 90 degree mechanical bend.
Hope this helps,
Paul Wolfe
Remember I'am a trainee

 

[Howsie]

thats the 'gas safety registered plumbers' section danny

Where's that then?

 

[Destroyer2813]

Where's that then?

Apply to admin with gsr number etc and appears on the menu same as the arms

 

[choco]

'

the puzzling thing is why you wanted to come back to the trade? you can earn more money with a paint brush..... i bet you longed for the smell of boss white'​

Desperation! I closed the business (none plumbing-related) I'd had for years because it was losing money but then just couldn't face getting a regular job. Did some voluntary teaching overseas for a while and then decided it was back to plumbing for me.
And Boss White has never let me down! Can't recall gas PTFE tape being around first time around, either. Is it better than Boss White?

​

 

[Mike Jackson]

Doesn't smell awful like boss white.

 

[Rickster123]

I still love that boss white smell.

 

[mountainman]

Who remembers Templastic jointing compound?