What we all working on this week ?

[king of pipes]

I have a insurance job to try and rescue a poorly installed quad shower the customer wants to save the tiling if possible and has a few spare so fingers crossed it may work , the loss adjuster allowed em £1500 that will just about cover materials. Kop

 

[Jim Goodenough]

Was this also slightly short mate?

Post automatically merged: Aug 22, 2020

Got one like this to fit in a house where I have already fitted 2 verticals and a horizontal in an extension. I like them but they are heavy and I’m a big lad.

Maybe "cast iron" is in vogue 🤔 - big lad are you! Challenge you to an arm wrestle!?

Post automatically merged: Aug 23, 2020

Little smidge of clear silicone under the nylon seats helps keep them in place.

Thanks Simon, obviously would need to do this a couple of hours before the "lift".

Post automatically merged: Aug 23, 2020

I'll try polyurethane glue next time, sets in 15mins.

 

[SimonG]

I find the silicone is just enough to hold it, but good call on the fast set 👍

 

[ShaunCorbs]

Managed to finish off two of the hand washing stations

 

[SimonG]

Managed to finish off two of the hand washing stations

Looks good, only concern I would have is too many taps which will squish them in. No 2m spacing.

 

[ShaunCorbs]

Looks good, only concern I would have is too many taps which will squish them in. No 2m spacing.

my thoughts exactly but there going to be in bubbles so there not bothering about spacing as if one gets it the whole class is going to get it my thoughts

 

[SimonG]

my thoughts exactly but there going to be in bubbles so there not bothering about spacing as if one gets it the whole class is going to get it my thoughts

That's where the logic breaks down. Might be a bubble at school but not at home.
But greater minds have got this in hand 😉

 

[Scott_D]

Nice gas pipe upgrade

 

[Harvest Fields]

I was going to comment on the soldering but I cannot 😡😡😡😛😛 So I will ask, where did you get the pipe clips from?

 

[ShaunCorbs]

I was going to comment on the soldering but I cannot 😡😡😡😛😛 So I will ask, where did you get the pipe clips from?

talons with 4 extensions

 

[Scott_D]

The rest of the gas run

 

[Jim Goodenough]

talons with 4 extensions

I was going to ask the length of the screws!? 😀

 

[ShaunCorbs]

I was going to ask the length of the screws!? 😀

. I would say a 3" 8 😀

 

[Jim Goodenough]

. I would say a 3" 8 😀

No way, they must be 80mm no. 5's 😀 😀

 

[Scott_D]

Another one bites the dust.
Called for a service and find this. Most parts not available and I won’t be able to fit a new one for 3 weeks so that will be a job lost.

 

[SimonG]

Problems of working in a small room. Taken 3 1/2 days on this.

 

[ShaunCorbs]

Changing this monstrosity and met with the bloody soil pipe behind right where I want to put some clips and had to be slightly off centre

luckily the top shower head is fixed on a backplate so will have to be pipe supported

 

[Jim Goodenough]

Changing this monstrosity and met with the bloody soil pipe behind right where I want to put some clips and had to be slightly off centre

luckily the top shower head is fixed on a backplate so will have to be pipe supported

Which brand of shower is it @ShaunCorbs ?

 

[ShaunCorbs]

Which brand of shower is it @ShaunCorbs ?

grohetherm 1000 bath and shower in a rapido t box

 

[Jim Goodenough]

Wet room job, customer didn't order enough tiles!

Post automatically merged: Aug 28, 2020

grohetherm 1000 bath and shower in a rapido t box

Thanks, what was the original?

Post automatically merged: Aug 28, 2020

grohetherm 1000 bath and shower in a rapido t box

Thanks, what was the original?

 

[ShaunCorbs]

Wet room job, customer didn't order enough tiles!
View attachment 45156

Post automatically merged: Aug 28, 2020

Thanks, what was the original?

Post automatically merged: Aug 28, 2020

Thanks, what was the original?

don’t have a clue hence the changing and removing tried for about a month to identify it some Chinese thing

 

[Harvest Fields]

Problems of working in a small

Strange place to fit a Fan?😉

 

[Scott_D]

don’t have a clue hence the changing and removing tried for about a month to identify it some Chinese thing

Did you get the tile out without smashing it?????

 

[Aquarius]

Strange place to fit a Fan?😉

I was going to say that 😀

 

[king of pipes]

Wish I hadn't started this one on a Friday previous installer made a poor job of making good the walls fell apart on me once old boiler was out grrrr, kop

 

[Scott_D]

Wish I hadn't started this one on a Friday previous installer made a poor job of making good the walls fell apart on me once old boiler was out grrrr, kop

Replacing with another ecotec?