Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the Showers and Wetrooms Advice - Whether a tiled sealed shower using a tray former and tanking, to create a wet-room. Or even just plumbing in an electric shower or shower using jets or mixer taps. Ask a plumbing question in here..
Normal Threads
I need to find an apron shower head which fits an 1980s arm. The thread on the arm is either...
I have a low pressure light on a tenants electric shower, it completely cuts the water off...
Hi,
Our shower only gives out hot water. The volume control works fine but the temp control...
Ive got an electric shower to replace, currenty 8.5 kw on a 6mm cable.
Is it dumb to install...
Hi,
We have a mains shower mixer. It used to be a Mira but I replaced the mixer tap some years...
Because there is a 5 inch gap between the tiled plaster board and the faceplate elbow screwed to...
- Geoff Billson
- 20
- 2K
- Latest:
- Geoff Billson
I need to replace some shower doors as they are falling apart and the manufacturer is no longer...
- Burger
- 6
- 115
- Latest:
- Harvest Fields
Hi,
I have recently moved in to a new home and upstairs is a bath with a tap mixer shower...
Anyone fitted one of these small booster pumps? I'm fitting one on Sunday and they are supposed...
- Deleted member 96286
- 13
- 7K
- Latest:
- Alan Wright
Hi folks I have a problem.
Our shower is a Triton thermoststic run from an Alpha combi boiler...
New Shower being installed - thermo mixer - new shower is around 60 feet from HW cyclinder...
Simple questions, I hope:
When planning the run of the waste pipe from a new shower, do I...
Hello,
this is my first post on here.
i am trying to stop water weeping from the temperature...
- Robert Brady
- 2
- 784
- Latest:
- Robert Brady
Hi.
I'm having issues with my bath taps. I moved into a new house which only has a bath, I...
Hi all, how can I see if I had mixer taps for a shower would it be better than an electric shower?.
ello all, searched google as i'm about to replace an external thermostatic shower and inlet...
- Dominic Warner
- 2
- 587
- Latest:
- Harvest Fields
Looking to fit an Aqualisa visage shower they say a 50 gallon cold water storage cylinder is...
- Piperdave22
- 4
- 733
- Latest:
- chris watkins
Apologies if this should not be posted here (I have posted to the electricians forum, however...
Would anyone be able to suggest a way of getting this this shower faceplate properly sealed to...
hi, new member here. I have a question for the forum. I have a shower/ mixer in the second...
I have a gravity fed system and have recently fitted a bath shower mixer tap designed to work at...
Hi all,
For new affordable 2 storey 100m2 3 bedroom semi detached with air to water heat pump...
I had a leaking overflow pipe a few weeks ago and not only was the water running from my...
- Denise Powell
- 11
- 3K
- Latest:
- townfanjon
Just wondering if this pipe layout might cause any trap syphoning from the shower or bath traps...
- Antonio King
- 11
- 5K
- Latest:
- Steve weightman
Anybody know how the water pump in disabled shower pan kicks in and drains away as the water is...
I am putting a shower in, but cant fathom what connector I need to use to get the mains water...
- Tom8521
- 10
- 1K
- Latest:
- king of pipes
Hi All
I have recently had an issue with my trevi boost shower, basically i have a very limited...
I have a problem with my shower - it started dropping in temperature to where even on the...
- Lewis9090
- 3
- 2K
- Latest:
- Harvest Fields
Good morning everyone :)
I’m having issues with my thermostatic mixer on my shower, I want to...
- Kevin Mooney
- 7
- 3K
- Latest:
- steadyon
Hi I hope I'm in the right place to ask a question about a shower problem. We have moved into a...
New Threads
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-