Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the General DIY Plumbing Forum - Ask DIY related questions in this forum.
Normal Threads
Hi everyone, I want to fit a tall rad in my bathroom which will be fed from above, but I would...
The installation manual says:
Frost protection
The appliance has a built in frost protection...
Hello, would be really grateful for some advice, I got a small copper basin in a market in...
- ToninoJ
- 2
- 1K
- Latest:
- ShaunCorbs
So I have a new installation of an Ecofit Pure 830 with a 10yr guarantee. Reading around, I need...
- Wibbly
- 3
- 3K
- Latest:
- Last Plumber
Hi everyone,
I am going to change the tap in my bathroom, is it quite straightforward to change...
- BobbyJoe
- 3
- 1K
- Latest:
- BobbyJoe
Am trying to get my head around plumbing in my new 1.5 kitchen sink. The waste arrangement looks...
Hi all,
I've moved into a new house a few months ago and these blue stains have been building up...
What would I do without you people. I need to run 2 x 15mm pipework to a tap. If I made up of...
When bringing pipework through the floor of the ensuite, I wonder just how tight I need to make...
- smallsteve
- 0
- 828
- Latest:
- smallsteve
I'm assuming either from the installation of this (or a previous) boiler, or issues with the...
- Gillan
- 2
- 1K
- Latest:
- Gillan
Hi people
Need some advice currently have a salus rt310i thermosat installed and it's a...
- Indi_s
- 9
- 787
- Latest:
- ShaunCorbs
Looking at retrofitting some pipe clips to existing pipe runs . Unfortunately when the pipes...
Our kitchen sink waste basket plug is broken and I can find one that looks the same type...
- Yeobrew
- 5
- 2K
- Latest:
- Basher
I have a boss adapter to connect to my basin waste to soil branch but the I am trying to work...
Does anyone know of programmable TRVs that would not look out of place on period cast iron...
We have a manifolded microbore CH system. We’ve had a new boiler and hot water cylinder...
Help!
complete novice! What do I need to buy/do to connect this cold water washing machine...
- Abbiel123
- 6
- 1K
- Latest:
- Abbiel123
I have my immersion cylinder thermostat fitted to wall, at 90 deg to the inlet from the diverted...
- Reddwarf4ever
- 11
- 3K
- Latest:
- Reddwarf4ever
Bath waste was slow-draining, and turned out to have about 6" of matted hair hanging onto the...
Hi all. If you were retrofitting a Megaflo with system boiler, would you be wanting to have a...
Hi,
When my boiler (regular vented I believe) is on there's a constant trickle of water flowing...
- ElricTheRed
- 11
- 5K
- Latest:
- moonlight
Hi all. I have a Polypipe UFH manifold with flow meters for each circuit. I’ve worked out the...
Hi. First time poster here. My UFH doesn't heat up like it used to. I've isolated the issue (I...
Hi
I have an old 1950s house, and the stopcock on the rising main is quite stiff and difficult...
Hi
Please can some advise how I remove the mixer tap above these images. This retaining bracket...
- Philmorris1892
- 5
- 1K
- Latest:
- ShaunCorbs
Hello all, this set up in the attached image was what we inherited when moving in. The balancing...
Looking to buy a handy washers kits to cover most taps and perhaps drain cocks.
Any...
- Stratf01
- 2
- 1K
- Latest:
- Stratf01
Hi
I have a toilet in a ground floor WC that was served by a maserator. After problems with...
- steles
- 4
- 1K
- Latest:
- Dr Doolittle
A plumber removed 1.3 m of copper pipe on a straight run(he said there was a leak) and replaced...
Hello folks,
Apologies ahead of time if this query is super basic!
Trying to decide to service...
New Threads
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1
-
Non-return rat flap/blocker at drain exitHi folks! I have a question re rat flaps /...
- Started by Johnfella
- Replies: 1
-
Texture metal lined pipe?Hi guys Any of you use the above pipe at all...
- Started by macka09
- Replies: 4
-
Rusted screw removal tool??Hi guys any advice on removing rusted screws...
- Started by macka09
- Replies: 0
-
An Boiler be left on with water tuned off?I have a Worcester Greenstar boiler and would...
- Started by Traveller 47
- Replies: 9
-
-
Boss your bathroom - Join the Tile High ClubTrade Account Victorian Plumbing 10% off for...- Started by Dan
- Replies: 0