Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
Hi folks, I need to remove at least a couple of radiators in a house that I have recently...
Hello! I had to replace the flush mechanism of my loo. I installed the new mechanism mentioned...
- Fram
- 10
- 5K
- Latest:
- Lou
Hi, A newbie here but need expert advice,
I have installers who have started fitting the...
Hi guys can someone explain to me how the wiring of UFH with the use of actuators is wired into...
Hi. Have you had any problems with osmagold pipe fittings? If so it would be great to hear from...
- RobEyr
- 12
- 6K
- Latest:
- Lou
Bit of a puzzle with home heating - 18yr old 'Y' Plan system with 12 rads, one big and one small...
- Doh!
- 14
- 8K
- Latest:
- Bobblehead
Hi All,
I hope you are doing well.
I have a problem. Not sure if this was always like that or...
- JohnMalcolm
- 4
- 625
- Latest:
- JohnMalcolm
Prompted by a surveyors energy efficiency report (and getting grants as this job belongs to a...
- Roy_66
- 3
- 434
- Latest:
- ShaunCorbs
Forgive my ignorance, with this basic question, but I seem to be struggling to both understand...
- sutty600
- 7
- 796
- Latest:
- sutty600
I have recently moved house.it appears the shower drain has become blocked and there is no inner...
- Wickerman
- 2
- 430
- Latest:
- Wickerman
Afternoon.
I have an issue with no water flow from any of the hot taps in the house, I can't...
- technomole
- 11
- 990
- Latest:
- technomole
I recently posted a thread about an extractor fan for a downstairs toilet and received lots of...
- Armitage Shanker
- 4
- 361
- Latest:
- Armitage Shanker
Vaillant Ecofit boiler fitted into designer kitchen cupboard. No filter fitted. Boiler needs...
- John-sjw
- 1
- 276
- Latest:
- ShaunCorbs
I’m finding it hard breaking into the industry. I’m a trainee plumber living in London
Hello...
- Guleed96
- 4
- 447
- Latest:
- Guleed96
Hello. Am I correct in thinking that the whole of the brass fitting in the attached image is...
- Bp89
- 2
- 353
- Latest:
- Bp89
Hi all,
WRAS approved Tap tail's (flexi's) - how do you distinguish the high quality ones from...
- Leonardo
- 9
- 2K
- Latest:
- ShaunCorbs
A close relative has moved to a new property and there is a small ground floor toilet room with...
- Armitage Shanker
- 6
- 571
- Latest:
- Ben-gee
I had a plumber fit a new mono block kitchen tap. The water runs very slowly now. Also, not sure...
- Be kind
- 7
- 592
- Latest:
- warmairnotwater
have a mixture of radiators range between 25 & 60 years old.Im having a new boiler fitted, do I...
We have a utility room with a washing machine but no sink. Wife wants sink. There is room to fit...
- Armitage Shanker
- 22
- 1K
- Latest:
- ShaunCorbs
I've recently replaced an immersion heater for a direct cylinder, for 2.75-3kW. The new one...
I have just replaced the old bathroom basin mono mixer taps, 2 tap heads, standard
compression...
Hi all
We noticed water suddenly backing up through the pipe for the dishwasher drainage pipe...
- Jamesbrown150
- 4
- 585
- Latest:
- ShaunCorbs
This is going to sound stupid - but it is giving me problems. I have fitted new flexible tap...
- Traveller 47
- 3
- 498
- Latest:
- Traveller 47
Hi Guys, Im looking to come to Australia in january/febuary 2024. I have a working holiday visa...
- JordanJones96
- 3
- 596
- Latest:
- Lou
can i buy a rod for moving the plug up and down on a pop up stopper on its own or do i need to...
my toilet pan sits on tiles , while trying to move my pan one of the screws snapped , i now have...
- roosterjim
- 3
- 319
- Latest:
- ShaunCorbs
This is the only place I can fit a washing machine in my new kitchen. The drainage pipe would...
- spoltysami
- 1
- 296
- Latest:
- ShaunCorbs
I am installing a sink in utility room. Washing machine waste already exists and is the verical...
- Armitage Shanker
- 3
- 463
- Latest:
- ShaunCorbs
We moved into a house with a gas Aga (I think converted from oil). The extraction pipe is fitted...
New Threads
-
New ceramic tap gland is stiffHi, fitted some new ceramic 1/4 turn tap...
- Started by Simone
- Replies: 0
-
Toilet blocks/pod install advice?Hi folks Do many of you do the type of work...
- Started by macka09
- Replies: 0
-
Vaillant ecoTEC 824 - simplest 30kW replacement?Hi. Looking to replace a 13-year old 824 with...
- Started by DevsAd
- Replies: 8
-
Back boiler not heating downstairs radiator multihead 3 pumpHi I had my heating on for a few days all of a...
- Started by Misty
- Replies: 3
-
Flat plate close coupled kitHas anyone done a toilet repair on a toilet...
- Started by Matt0029
- Replies: 2
-
Toilet blocks/pods advice wanted?Hi folks Do many of you do the type of work...
- Started by macka09
- Replies: 0
-
-
-
UK UFH specialist in Norwich areahello, I have a friend who has a FAR ufh setup...
- Started by Jim Goodenough
- Replies: 0
-
Determining the last radiator in the downstairs radiator runI am attempting to find out which one is the...
- Started by elmocambo
- Replies: 4
-
WAVIN (Hep20) UFH Actuator - is newer model compatible?Hi. Mil's UFH has Wavin 230V 2W actuators -...
- Started by DevsAd
- Replies: 1
-
New combi choice - manufacturer with the 'best' controls?Hi all. Asking for a friend who is getting a...
- Started by DevsAd
- Replies: 6
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 1
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 5
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 10