Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
Dear all
I’m a home owner looking for advice.
I recently had a power flush which was...
Hi,
Can you use a vented hot water cylinder on an unvented system?
Many Thanks,
Carl
This thermoastat is much higher than the dial says. Correct.me if I'm wring but that doesn't...
- gavdtra
- 4
- 1K
- Latest:
- Lou
I have recently moved house and would like to move a radiator from a side wall, to one below the...
- Tommy o'Toole
- 3
- 3K
- Latest:
- Lou
I need to connect 68mm plastic pipe to 68mm cast iron pipe and the water will be running plastic...
Hello,
I have had a Saniflo PRO XR for three years. Still under warranty and I put...
Hi everyone,
I have CH with a system boiler with a header tank and 8mm micro bore pipes to the...
According to the news, facebook whatsapp and instagram are all down and have been for around an...
Happy Christmas everyone,
We’ve just had a new Gledhill Stainless Lite indirect unvented...
Hi , don’t know if this is allowed on here.... I’ve moved to Thailand and have a mybuilder...
- Chris Watson
- 15
- 4K
- Latest:
- Lou
Hello, Hope you guys can help, I have a conk/clunk noise coming out the cylinder, when I draw...
Boiler and cooker will fire up initially however when temperature hit neither will reignite...
- Dippy76
- 12
- 5K
- Latest:
- Lou
Hi all, as the title says, few months ago moved into a house where the water is way harder than...
Hi all,
I've got my G3 card. First time I've attempted to re-pressurise the white, expansion...
- Jennie
- 12
- 6K
- Latest:
- Lou
Three storey townhouse with a 2003 gledhill boilermate 2000 and 2008 Worcester green star Ri...
- Kurko1979
- 7
- 1K
- Latest:
- Lou
I see that there was a post in November that refers to a LARGE leak, but ours is much smaller...
Hi,
Wonder if anyone can help - I've got this towel rail (pic below) which has two valves on...
Hi,
I'm replacing a 14" copper immersion heater installed into a Fortic hot water cylinder...
Recently had a new heating and hot water system retrofitted in a domestic property. Previous hot...
Hi.
What would you recommend for pipe support whilst running 15mm central heating pipes...
I had an unvented cylinder (and gas boiler) installed by a Gas Safe Register engineer. He later...
Just wanting advice on the average cost of installing a tempering valve on a solar hot water...
I have an Instinct Mag Cleaner fitted to my system, but was never given the spanner nor spare...
we are looking for heating engineers, plumbers and trainee heating engineers to join our...
I have an old drain cleaner which runs like new when going Ridgid Kollmann1500 but requires a...
Hi All ,
Some advice please ,
We have not had the heating on for a bit but decided to put in...
- Ouralan
- 8
- 6K
- Latest:
- Lou
Hi everyone,
I would like your advice on what type of water filter to buy to fit under my...
Hello, i am new here and i am looking into becoming a plumber, however, around 10 years ago, my...
- AbdulS
- 14
- 2K
- Latest:
- Lou
Hi all,
Just after some other plumbers' views on an issue.
I serviced a pro boil tap this week...
- Jennie
- 6
- 5K
- Latest:
- Lou
New Threads
-
UK UFH specialist in Norwich areahello, I have a friend who has a FAR ufh setup...
- Started by Jim Goodenough
- Replies: 0
-
Determining the last radiator in the downstairs radiator runI am attempting to find out which one is the...
- Started by elmocambo
- Replies: 3
-
WAVIN (Hep20) UFH Actuator - is newer model compatible?Hi. Mil's UFH has Wavin 230V 2W actuators -...
- Started by DevsAd
- Replies: 0
-
New combi choice - manufacturer with the 'best' controls?Hi all. Asking for a friend who is getting a...
- Started by DevsAd
- Replies: 5
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 1
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2