Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
Hi All,
I've discovered a leak somewhere related to the cistern to a toilet upstairs which is...
Hi there
My radiator came off the wall today with weak wall plugs.
There was one screw that...
I have some deck mounted bath taps and I need to know how to remove and repace the cartridges
- mark m
- 1
- 335
- Latest:
- oz-plumber
A very soggy Rishi announced a general election to be held on the 4th July. I was loving the guy...
- Lou
- 5
- 461
- Latest:
- Lou
Good evening, we have a 110mm outside sewer stack in black plastic running up the house, and the...
Hi all
I have had a very high water bill. When I turn the external stopcock off, the flow...
- Ian Noble
- 1
- 251
- Latest:
- ShaunCorbs
My dishwasher (on the left) and washing machine (on the right) are positioned next to one...
Thought id give a shout out to our next door 🤔 😕 😅 any members of the Plumbing Zone forum are...
- Dan
- 2
- 715
- Latest:
- Dan
This a mix of material pipework and sizes. It's steel (what size?) and 35mm copper 28mm copper...
- Ted808
- 4
- 347
- Latest:
- ShaunCorbs
I have a dripping hot water bath tap. I have removed the top but underneath is a plastic cap (...
Firstly, apologies if this has been posted in the wrong section.
Been reading the forum for a...
Hi,
I have some damp moving up the walls and the floor is risen in one place also.
I got...
Horttmann H37XL
Hot water wasn't heating so I reset programmer to factory defaults. Turned out...
Leaking toilet - needs replacement flush valve but existing screws direct into cistern not fixed...
- fiddler3
- 1
- 471
- Latest:
- ShaunCorbs
I'm on a well with a pressure tank. Should the tank run if no water is being used? My tank...
- Tom Schmidt
- 1
- 307
- Latest:
- ShaunCorbs
My unvented domestic heating and hot water system incorporates a RWC CWIC 2000 3/4.5 bar...
- benawhile
- 4
- 505
- Latest:
- ShaunCorbs
Wonder if some can help our toilet once the toilet has been flushed it takes ages to fill up...
- Steve240659
- 1
- 224
- Latest:
- ShaunCorbs
Hi I want to replace my trv heads on my radiators. However I am trying to find what the current...
- andydiy
- 1
- 464
- Latest:
- ShaunCorbs
I will take my first ACS in a couple months of time and want to make better preparation for the...
- tsxho0526
- 1
- 380
- Latest:
- Chuck
Hi Guys ,
Had a valliant engineer out as I could not add any water to my boiler and it’s...
I have a 27mm OD semi-flexible black pipe (PE?) feeding mains water to an annexe. I am...
Hi,
I was hoping to get some advice. I live in a three floor house with a gravity fed cold...
- JM Tiling
- 2
- 577
- Latest:
- JM Tiling
- JM Tiling
- 2
- 455
- Latest:
- ShaunCorbs
Hi
I have a kitchen mixer tap which allows the top part to pull out as a hose (like american...
- louisjamesbanks17
- 2
- 497
- Latest:
- oz-plumber
How much more would you pay for a flush valve (drop valve) that was completely universal and...
I think I looked into it a few years ago. That a modern 200litre unvented cylinder would need a...
I'm remodeling our master bath. We have two 30 inch vanities with a 24 inch open space between...
- kwinch
- 4
- 454
- Latest:
- oz-plumber
We have a problem with a downstairs bathroom toilet. When flushed, the water in the bowl rises...
- Urbanbassman
- 2
- 357
- Latest:
- PETE 123
Any idea on this pipe as the builders left it with black gaffa tape. Need to work out what this...
- Thisisthecount
- 3
- 325
- Latest:
- ShaunCorbs
New Threads
-
UK UFH specialist in Norwich areahello, I have a friend who has a FAR ufh setup...
- Started by Jim Goodenough
- Replies: 0
-
Determining the last radiator in the downstairs radiator runI am attempting to find out which one is the...
- Started by elmocambo
- Replies: 3
-
WAVIN (Hep20) UFH Actuator - is newer model compatible?Hi. Mil's UFH has Wavin 230V 2W actuators -...
- Started by DevsAd
- Replies: 0
-
New combi choice - manufacturer with the 'best' controls?Hi all. Asking for a friend who is getting a...
- Started by DevsAd
- Replies: 5
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 1
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2