Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Questions and plumbing advice in the UK Plumbers Forums - This is the UK Plumbers Forums. Plumbing threads related to UK rules and regulations. Advice for Plumbers in the United Kingdom. Keep Gas-related advice in the Gas Engineers Forum..
Normal Threads
When connecting a plastic metric waste pipe from a bath to a metal imperial pipe in the wall is...
Evening all.
Can anyone help me with a bit of advice.
We “inherited“ a Potterton Prima 60F...
Hi. Can anyone tell me if it's ok for plastic water pipes to actually touch the radiator? Thanks
Home central heating in 10mm plastic then via a push fit connector to 10mm copper feeding the...
- ian.
- 2
- 636
- Latest:
- ian.
Hi all,
First off, sorry if this is appearing in the wrong place, but I figure I might get some...
I can’t work out how to connect this pipe back to the pipe on the wall. Every time I try water...
Can anyone identify this adapter? It's 22mm copper to an unknown plastic piping system...
- Sergiu Grosu
- 12
- 2K
- Latest:
- ShaunCorbs
Hi - we have had new radiators fitted about 6 months ago ("DuraTherm Horizontal Double Flat...
Hi, I have a bath needs to be replaced but I need to make sure that the bath that I find is able...
Hi, I've got a cold water storage tank which feeds the hot water cylinder below. The hot water...
Please forgive the length of this post, but I must provide all the information to fully explain...
- cayenne1011
- 8
- 1K
- Latest:
- cayenne1011
Hi folks we have a 5 year old Atag boiler under guarantee and the water pressure gauge has...
- Stuart Phillips
- 2
- 827
- Latest:
- king of pipes
Hi,
Does anyone know what product is a good replacement for a Honeywell CM927 wireless...
- RETC2022
- 1
- 1K
- Latest:
- Chuck
I have a project where we'd like to put a kitchen in the living room to create an open plan. The...
My builder says there is no way to tighten these so he's just secured with silicon.
Surely this...
- philw67
- 2
- 671
- Latest:
- snowhead
Hi
I recently moved into my first home and after spending the winter here, I wasn’t particularly...
I keep getting this message every time I reply to a post.
The only way round it is to use 'snip...
- Stevex
- 8
- 1K
- Latest:
- Chuck
I just purchased a home and I would like to install a utility sink in the basement with a pump...
Our Victorian house's rainwater down-pipes are connected to the foul-water sewer. In order to...
- Michael Burrows
- 0
- 761
- Latest:
- Michael Burrows
Hi all, I’m looking for a bit of advice.
A flat two stories up from mine has installed a water...
I could really do with some advice.
Bit of back history, I have a trianco thorncliffe solid...
- chook1976
- 15
- 2K
- Latest:
- chook1976
Sorry I have sort of asked this before, tried professionals but not great 1st experience hence...
I had a plumber connect slightly wider radiator with plastic pipes. I wanted to bend the pipe...
- kgnotq2
- 2
- 882
- Latest:
- gmartine
I had a plumber connect slightly wider radiator with plastic pipes. I wanted to bend the pipe...
- Stanley123
- 1
- 508
- Latest:
- gmartine
Good morning everyone. Just joined the forum and was hoping for some advice please.
I have a...
- DavidP
- 7
- 950
- Latest:
- DavidP
Hello all,
I am new to this forum and would like to say hello and thanks for accepting me.
I...
My dishwasher stopped working the other day - a red warning light comes on and it won't start...
- Dan Wright
- 4
- 788
- Latest:
- Dan Wright
Hi all,
Excuse the length but this seems like a complicated fix.
I lived in a 1930s block of...
Have an Ideal Logic + 18 with intermittent fault. When on demand the display constantly changes...
- Ed Alexander
- 4
- 957
- Latest:
- Tomcat
Ideal logic heat 18. Uncoded intermittent fault near end of days use only. Burner reignites...
New Threads
-
Determining the last radiator in the downstairs radiator runI am attempting to find out which one is the...
- Started by elmocambo
- Replies: 0
-
WAVIN (Hep20) UFH Actuator - is newer model compatible?Hi. Mil's UFH has Wavin 230V 2W actuators -...
- Started by DevsAd
- Replies: 0
-
New combi choice - manufacturer with the 'best' controls?Hi all. Asking for a friend who is getting a...
- Started by DevsAd
- Replies: 2
-
Are Pipe Heaters Safe?I have an ouside garden tap that freezes every...
- Started by Traveller 47
- Replies: 1
-
Choice of pipe for hot water secondary/recirculating systemWhat plastic based / barrier pipe can you use...
- Started by Failte
- Replies: 7
-
-
Vaillant echTEC Plus 838H over pressurisingHello. Not to long ago I took off a radiator...
- Started by lee2lee
- Replies: 0
-
-
Issue replacing 22mm pipe on central heatingHi all I was hoping to make good this corner...
- Started by kristeva
- Replies: 4
-
-
Inspection chamber leakWould someone be able to advise please. I’ve...- Started by BobThomas
- Replies: 8
-
Aliddin easyfit isolator, Anyone with a bad experience of these?Hi all, thinking of fitting the said isolator...
- Started by Barry
- Replies: 2
-
Ultra compact wall hung toilet frameI'm redoing our 4' x 4' downstairs loo. My...
- Started by UserError
- Replies: 1
-
-
So... Does anyone know what this is??As I said, any ideas what this is for? It was...
- Started by Jonnyfrance
- Replies: 5
-
Potterton Promax 15 HEBeen called out to an issue with a Potterton...
- Started by MethodPH
- Replies: 3
-
Best flush cones for low level cistern connections?Any recommendations other than the usual clear...
- Started by macka09
- Replies: 4
-
-
customer wants boiler in unheated storeroomunheated storeroom, with louvre doors open to...
- Started by Gasinspect
- Replies: 2
-
Seized Filling Loop TapHi, any ideas on how I can get this seized tap...
- Started by fadsarmy
- Replies: 1